Jump to content

Talk:Drag reducing agent

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Reconrabbit (talk | contribs) at 17:49, 16 May 2024 (Assessment (Low): banner shell, +Chemistry, +Polymers, +Energy (Rater)). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
[edit]

Prior content in this article duplicated one or more previously published sources. The material was copied from: https://rbnenergy.com/kind-of-a-drag-boosting-crude-and-products-pipeline-capacity-with-drag-reducing-agents https://www.businesswire.com/news/home/20171120006157/en/LSPI-Commissions-New-Plant-Adds-Significant-Capacity. Copied or closely paraphrased material has been rewritten or removed and must not be restored, unless it is duly released under a compatible license. (For more information, please see "using copyrighted works from others" if you are not the copyright holder of this material, or "donating copyrighted materials" if you are.)

For legal reasons, we cannot accept copyrighted text or images borrowed from other web sites or published material; such additions will be deleted. Contributors may use copyrighted publications as a source of information, and, if allowed under fair use, may copy sentences and phrases, provided they are included in quotation marks and referenced properly. The material may also be rewritten, providing it does not infringe on the copyright of the original or plagiarize from that source. Therefore, such paraphrased portions must provide their source. Please see our guideline on non-free text for how to properly implement limited quotations of copyrighted text. Wikipedia takes copyright violations very seriously, and persistent violators will be blocked from editing. While we appreciate contributions, we must require all contributors to understand and comply with these policies. Thank you. NewYorkActuary (talk) 15:14, 19 January 2018 (UTC)[reply]

"How it works" has some very strange statements

[edit]

The first paragraph of "How it works" says:

> Because the oil pushes up against the inside wall of the pipe, the pipe pushes the oil back down causing a swirling of turbulence to occur which creates a drag force. When the polymer is added, it interacts with the oil and the wall to help reduce the contact of the oil with the wall.

Concerns:

  1. The pressure of the oil against the wall has nothing to do with turbulence and drag
  2. The polymer is fully mixed with the oil; it doesn't materially reduce the amount of oil contacting the wall

Someone with some expertise should rewrite this. -- Dan Griscom (talk) 12:40, 10 September 2022 (UTC)[reply]