ANSI escape code
ANSI escape codes are used to control text formatting and other output options on text terminals. In this context, ANSI refers to the ANSI X3.64 standard (which was withdrawn in 1997). It was replaced by ISO/IEC 6429, which is equivalent to ECMA-48.
Most of these escape sequences start with the characters ESC (ASCII decimal 27/hex 0x1B/octal 033) and [ (left bracket). This sequence is called CSI for Control Sequence Introducer (or Control Sequence Initiator). There is a single-character CSI (155/0x9B/0233) as well. The ESC+[ two-character sequence is more often used than the single-character alternative, although terminals which support ISO 8859 recognize either sequence. Other devices, e.g., those supporting only ASCII (7-bits), or which implement 8-bit code pages which use the 0x80–0x9F control character range for other purposes will recognize only the two-character sequence. Though some encodings use multiple bytes per character, in this topic all characters are single-byte.
Support
Most terminal emulators running on Unix-like systems such as Linux have support built in, as do such systems' native consoles.
Windows and DOS
Windows 95, Windows 98 and DOS systems need a device driver for the ANSI codes - the de facto standard being ANSI.SYS, but others are used as well.
Console windows in Windows versions based on NT (Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2003, Windows Vista and Windows Server 2008) do not natively support ANSI Escape sequences, though some support is possible. By adding the following line to the CONFIG.NT file located in the Windows System32 directory, ANSI output from 16-bit legacy programs executing under the NTVDM will be interpreted:
DEVICE=%SystemRoot%\system32\ANSI.SYS
Some support is also offered through alternate command processors such as JP Software's 4NT and Michael J. Mefford's ANSI.COM.
In other words, 32-bit character-mode Windows applications cannot write ANSI escape sequences to the console, but must interpret their actions and call the native Console API to accomplish the proper result. Applications cannot bypass the Console API. The Windows hardware abstraction layer does not permit user-mode applications to set the underlying VGA registers. Window's Console API has some restrictions regarding the blink, underline and reverse VGA attributes.
- The API provides bright background colors rather than blink.
- The following attribute bits for SetConsoleTextAttribute() have no effect even though they are listed:
COMMON_LVB_REVERSE_VIDEO COMMON_LVB_UNDERSCORE
- Reverse-video can be emulated in an application's code without much difficulty.
If ANSI.SYS is loaded in MS-DOS, the escape character can be specified as $e in the prompt command, e.g. prompt $e[44m;... would specify a blue background as part of the prompt. In most modern programming languages it can be specified as "\x1B" (C, Perl and Ruby also offer the equivalent "\e"), in Java it can be specified as "\u001B", and in BASIC it can be specified as CHR$(27) or CHR$(&H1B).
Note: most devices only support a subset of the SGR (Select Graphic Rendition) codes.
Codes
The general structure of an ANSI code is CSI n1 ; n2... letter. The numbers are optional parameters, and the final byte specifies the command. The default value used for omitted parameters varies with the command; it is usually 1 or 0. If trailing parameters are omitted, the trailing semicolons may also be omitted.
The final byte is technically any character in the range 64 to 126 (hex 0x40 to 0x7e, ASCII @ to ~), and may be extended with leading intermediate bytes in the range 32 to 47 (hex 0x20 to 0x2f). Only the case of a single intermediate byte of 32 is currently standardized.
Some of the ANSI codes are private (not covered by the standard). There are two ways these are encoded:
- if the first byte of the string is in the range 60 to 63 (hex 0x3C to 0x3F, ASCII '<', '=', '>' and '?')
- if the final byte is in the range 112 to 126 (hex 0x70 to 0x7e, ASCII p to ~).
Examples of private escape codes include the DECTCEM (DEC text cursor enable mode) shown below. It was first introduced for the VT-300 series of video terminals.
| Code | Name | Effect |
|---|---|---|
| CSI n A | CUU | Moves the cursor n (default 1) cells in the given direction. If the cursor is already at the edge of the screen, this has no effect. CUU: Up; CUD: Down; CUF: Forward; CUB: Back; |
| CSI n B | CUD | |
| CSI n C | CUF | |
| CSI n D | CUB | |
| CSI n E | CNL | Moves cursor to beginning of the line n (default 1) lines down (next line). |
| CSI n F | CPL | Moves cursor to beginning of the line n (default 1) lines up (previous line). |
| CSI n G | CHA | Moves the cursor to column n. |
| CSI n ; m H | CUP | Moves the cursor to row n, column m. The values are 1-based, and default to 1 (top left corner) if omitted. A sequence such as CSI ;5H is a synonym for CSI 1;5H as well as CSI 17;H is the same as CSI 17H and CSI 17;1H |
| CSI n J | ED | Clears part of the screen. If n is zero (or missing), clear from cursor to end of screen. If n is one, clear from cursor to beginning of the screen. If n is two, clear entire screen (and moves cursor to upper left on MS-DOS ANSI.SYS). |
| CSI n K | EL | Erases part of the line. If n is zero (or missing), clear from cursor to the end of the line. If n is one, clear from cursor to beginning of the line. If n is two, clear entire line. Cursor position does not change. |
| CSI n S | SU | Scroll whole page up by n (default 1) lines. New lines are added at the bottom. (not ANSI.SYS) |
| CSI n T | SD | Scroll whole page down by n (default 1) lines. New lines are added at the top. (not ANSI.SYS) |
| CSI n ; m f | HVP | Moves the cursor to row n, column m. Both default to 1 if omitted. Same as CUP |
| CSI n [;k] m | SGR | Sets SGR (Select Graphic Rendition) parameters. After CSI can be zero or more parameters separated with ;. With no parameters, CSI m is treated as CSI 0 m (reset / normal), which is typical of most of the ANSI codes. |
| CSI 6 n | DSR | Reports the cursor position to the application as (as though typed at the keyboard) ESC[n;mR, where n is the row and m is the column. (May not work on MS-DOS.) |
| CSI s | SCP | Saves the cursor position. |
| CSI u | RCP | Restores the cursor position. |
| CSI ?25l | DECTCEM | Hides the cursor. |
| CSI ?25h | DECTCEM | Shows the cursor. |
| Intensity | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 9 |
|---|---|---|---|---|---|---|---|---|---|
| Normal | Black | Red | Green | Yellow[2] | Blue | Magenta | Cyan | White | reset |
| Bright | Black | Red | Green | Yellow | Blue | Magenta | Cyan | White |
| Code | Effect | Note |
|---|---|---|
| 0 | Reset / Normal | all attributes off |
| 1 | Intensity: Bold | |
| 2 | Intensity: Faint | not widely supported |
| 3 | Italic: on | not widely supported. Sometimes treated as inverse. |
| 4 | Underline: Single | not widely supported |
| 5 | Blink: Slow | less than 150 per minute |
| 6 | Blink: Rapid | MS-DOS ANSI.SYS; 150 per minute or more |
| 7 | Image: Negative | inverse or reverse; swap foreground and background |
| 8 | Conceal | not widely supported |
| 21 | Underline: Double | |
| 22 | Intensity: Normal | not bold and not faint |
| 24 | Underline: None | |
| 25 | Blink: off | |
| 27 | Image: Positive | |
| 28 | Reveal | conceal off |
| 30–39 | Set foreground color, normal intensity | 3x, where x is from the color table above |
| 40–49 | Set background color, normal intensity | 4x, where x is from the color table above |
| 90–99 | Set foreground color, high intensity | aixterm |
| 100–109 | set background color, high intensity | aixterm |
Examples
CSI 2 J — This clears the screen and, on some devices, locates the cursor to the y,x position 1,1 (upper left corner).
CSI 32 m — This makes text green. On MS-DOS, normally the green would be dark, dull green, so you may wish to enable Bold with the code CSI 1 m which would make it bright green, or combined as CSI 32 ; 1 m. MS-DOS ANSI.SYS uses the Bold state to make the character Bright; also the Blink state can be set (via INT 10, AX 1003h, BL 00h) to render the Background in the Bright mode. MS-DOS ANSI.SYS does not support SGR codes 90–97 and 100–107 directly.
CSI 0 ; 6 8 ; "DIR" ; 13 p — This re-assigns the key F10 to send to the keyboard buffer the string "DIR" and ENTER, which in the DOS command line would display the contents of the current directory. (MS-DOS ANSI.SYS only) This is a private-use code (as indicated by the letter p), using a non-standard extension to include a string-valued parameter. Following the letter of the standard would consider the sequence to end at the letter D.
CSI s — This saves the cursor position. Using the code CSI u will restore it to the position. Say the current cursor position is 7(y) and 10(x). The code CSI s will save those two numbers. Now you can move to a different cursor position, such as 20(y) and 3(x), using the code CSI 20 ; 3 H or CSI 20 ; 3 f. Now if you use the code CSI u the cursor position will return to 7(y) and 10(x). Some terminals require the DEC sequences ESC 7 / ESC 8 instead.
See also
Notes
- ^ The names are standard, however the exact shade/hue/value of colors are not standardized and will depend on the device used to display them.
- ^ Regardless of the documentation, on some terminals, especially with ansi.sys running on DOS, this normal intensity foreground color is rendered as Orange. See this ansi art as an example
External links
- Standard ECMA-48: Control Functions for Coded Character Sets 5th edition (June 1991)
- ANSI.SYS -- ansi terminal emulation escape sequences
- ANSI/VT100 Terminal Control Escape Sequences Note: VT100's do not do color
- Xterm / Escape Sequences
- AIXterm / Escape Sequences
- A collection of escape sequences for terminals that are vaguely compliant with ECMA-48 and friends.