COSC
- This article is about the Swiss Official Chronometer Testing Institute, known by its French acronym of COSC.
- For the state college in Connecticut, see Charter Oak State College.
![](http://upload.wikimedia.org/wikipedia/en/3/34/COSCLogo.jpg)
COSC aka C.O.S.C. is Contrôle Officiel Suisse des Chronomètres, the Official Swiss Chronometer Testing Institute, which is the institute responsible for certifying the accuracy and precision of wristwatches in Switzerland.
Background
Founded in its current form in 1973, the COSC is a Swiss non-profit organization that tests Swiss-made chronometers. COSC is an acronym for the organization's French name, Contrôle Officiel Suisse des Chronomètres.
COSC testing generally applies to watches manufactured/assembled in Switzerland.[1] Notwithstanding, the normative standards are set by international agreement and are the same whether they are nominally labeled ISO or DIN standards. Some German, Japanese, and even non-certified Swiss movements can surpass the normative requirements. The Japanese have largely abandoned the accolade, replacing it with in-house testing to a slightly more strict standard as with, for example, the Grand Seiko. On the other hand, the Germans have set up their own testing facility in Saxony at the Glashütte Observatory [2][3] where the DIN 8319 standards, which mirror the ISO standards used by COSC, are employed. At one time the French provided similar large scale testing at the Observatory at Besançon, however, today only a very few watches are currently tested there and carry the accolade "Observatory Chronometer."
The COSC was founded by five watchmaking cantons (states) of Switzerland: Bern, Geneva, Neuchâtel, Solothurn and Vaud, together with the Federation of the Swiss Watch Industry (FHS). It encompasses the laboratories/observatories that had been created independently of each other from the late 19th century.
Three laboratories now test the movements submitted by individual watch manufacturers to be granted chronometer status. They are in Biel/Bienne, Geneva and Le Locle. The Geneva and Biel laboratories are almost entirely devoted to testing Rolex movements.[4] Although not all Rolex watches are chronometers, Breitling has claimed that since 2000 all of its production is COSC certified. Since its inception in 2006 Bremont watch has had its entire line COSC certified as well. Omega also has much of its production certified. Thus, based upon the movements used by Rolex, Breitling, and Omega, the movement calibers that obtain most of the COSC certificates[5] are the Rolex 3135[6] (since 1988) (and variants 3155, 3175, 3185, 4130) and 2235, the ETA 2892A2[7] (and variants) and Valjoux 7750,[8] each of which operates at 28,800 beats per hour.
Standards and methods
Each officially certified COSC chronometer is identified by a serial number engraved on its movement and a certification number given by the COSC.
Testing criteria are based on ISO 3159[9] which defines a wrist chronometer with spring-balance oscillator. Only movements which meet the precision criteria established under ISO 3159 are granted an official chronometer certificate. Compare ISO 3158.[10]
Each uncased movement is individually tested for fifteen days, in five positions, at three different temperatures. The movements are fitted with a seconds hand and the automatic winding mechanisms are disengaged for the tests. Measurements are made daily with the aid of cameras. Based on these measurements, seven eliminatory criteria are calculated, each of which must be met e.g. for movements of a diameter over 20 mm, the requirements, indicated in seconds/day, are noted in the table below. There is no ISO standard for quartz timepieces, but there is development in this field. ISO 10553:2003 specifies the procedure for evaluating the accuracy of quartz watches, individually and by lot, and the relationship between the accuracy tested and the accuracy classification given by the manufacturer. It applies to quartz watches having accompanying documents on which the accuracy classification is indicated. Nevertheless, COSC has also developed its own standard for testing quartz chronometers with eight eliminatory criteria, also noted in the table below.
Mechanical | Quartz |
---|---|
Average daily rate: -4/+6 [11] | Average daily rate at 23 °C: ± 0.07 |
Mean variation in rates: 2 [12] | Rate at 8 °C: ± 0.2 |
Greatest variation in rates: 5 [13] | Rate at 38 °C: ± 0.2 |
Difference between rates in H & V positions: -6/+8 [14] | Rate stability: 0.05 |
Largest variation in rates: 10 [15] | Dynamic rate: ± 0.05 |
Thermal variation: ± 0.6 [16] | Temporary effect of mechanical shocks: ± 0.05 |
Rate resumption: ± 5 [17] | Rate resumption: ± 0.05 |
n/a | Residual effect of mechanical shocks: ± 0.05;
200 shocks equivalent to 100 G (981 m/s²) |
Measurements are compared with a time base established by two independent atomic clocks synchronized on GPS time. Not all chronometers are supplied with the report issued by the COSC as the reports are optional to the brand or maker. Each manufacturer may decide whether to reveal the results gathered during the certification process of the movement. For example, Breitling do supply all their watches with COSC Certificates (all Breitling watches since 2000 are Certified chronometers) however Rolex and Omega do not supply even their chronometer certified watches (not all their watches are certified chronometers) with the COSC certificates. Omega however can provide the COSC chronometer certificate if asked.
Observatory trials and standards before 1973
While competitive chronometer testing took place at the observatories in Neuchâtel (1866-1975) and Geneva (1873-1967), testing of large numbers of watches intended for public sale was conducted by the independent Bureaux officiels de contrôle de la marche des montres (B.O.s) established between 1877 and 1956. Between 1961 and 1973, [18],[19] “a chronometer [was] a precision watch, which [was] regulated in several positions and at different temperatures and which had received a certificate [from the (“B.O.)]." Collective certificates, rather than individual certificates, were usually issued. The 1961-73 standard required a mean daily rate in five positions of -1/+10. In 1973, the B.O.’s came under the C.O.S.C. which specified a daily rate of -4/+6 sec.
The value of COSC certification
Only 3% of Swiss Watch production is COSC certified
Over a million official chronometer certificates are delivered each year, representing only 3% of the Swiss watch production, a proportion that underscores the exceptional nature of a chronometer. To earn chronometer certification, a movement must not only be made from the highest quality components, but also be the object of special care on part of the finest watchmakers and timers during assembly.[20]
Meaningful test or marketing gimmick?
There is a debate among watch enthusiasts as to whether the COSC chronometer certification for a Swiss watch is a meaningful test or a simple marketing gimmick. On the one hand, when a watch maker intends to submit a movement for COSC testing, they frequently employ additional jewelling (i.e. to the barrel) and better quality[21] "Ébauche" parts (i.e. higher quality hairsprings, mainsprings, balance wheels; regulators, etc.) all aimed at the coveted chronometer certification.[22] On the other hand, it is likely that most good quality movements on the market today are capable of being tweaked, and timed to fall comfortably within the benchmark -4/+6 average daily rate criteria of the COSC. However, movements so submitted to COSC are more likely to be submitted with better quality parts in order to be confident of a successful test, and as a consequence may be more likely to maintain better timekeeping rates over the service life of the time piece.[23]
Therefore, some of the ″Haute Horlogerie″ Swiss Watch Manufacturers have created on 5 June 2001, ″The Fleurier Quality Foundation″ to establish new aesthetic and technical criteria dedicated to the certification of finished watches. Their certification meets a normative requirement for the market and the final customer to have a better definition of quality watchmaking, adapted to today's demands and technological advances. Geneva's have created along similar criteria the Geneva seal
Exemplar brands submitting to COSC
Among others, Ball Watch Company, Breitling submit all their movements for COSC certification, Bremont, MontBlanc, Maurice Lacroix, Chanel, Invicta, Baume et Mercier, Chopard, Chronoswiss, Ebel, Enicar, Girard-Perregaux, Mido, Omega, Oris, Patek Philippe & Co., Rolex, TAG Heuer, Stowa, Ulysse Nardin, Vacheron Constantin, Waltham International and Zenith are brands that submit at least some of their movements for COSC certification. Audemars Piguet, Breguet, IWC, Jaeger-LeCoultre, A. Lange & Söhne, Grand Seiko, Franck Muller and Piaget, Bvlgari are among the expensive brands that do not submit their movements to COSC.
Certification in perspective
Fine regulation and chronometer characteristics of a watch can be destroyed in seconds by a rough and inexperienced hand. [24] Considering the fact that mechanical watches are never used for real timekeeping and navigation anymore, and that practically any quartz watch is vastly better in accuracy, certification is just a historical relic.
See also
References
- ^ http://forumamontres.forumactif.com/les-interviews-f6/interview-de-pierre-yves-soguel-directeur-du-cosc-t23463.htm
- ^ http://www.chronometerwerke-glashuette.de/pdfs/Sternwarte_0609_EN.pdf?PHPSESSID=1fafdbfcf01fbc87c54d2ed4f0b2e530
- ^ Deutsche Chronometer - Deutsche Chronometer - Fine watchmaking, made in Germany - Focus - Fondation de la Haute Horlogerie
- ^ http://www.timezone.com/library/wbore/wbore631733384647656250
- ^ http://www.fhs.ch/en/news/news.php?id=565
- ^ Watch as described at horlogerie-suisse.com and vintagepocketwatches.net.
- ^ Movement as described at horlogerie-suisse.com.
- ^ Movement as described at horlogerie-suisse.com.
- ^ PDF file (of 1976 version)
- ^ ISO 3158 (PDF file).
- ^ this is the average rate over the first ten testing days.
- ^ this figure shows if a watch tends to run fast or slow; a good quality watch will be consistent, whether it is fast, slow or correct.
- ^ This is the largest difference between any two day's readings in a single position.
- ^ calculated by subtracting the average of the rates in the vertical (V) position (first and second days) from the average of the rates in the horizontal(H) position (ninth and tenth days).
- ^ the largest difference between the mean daily rate (see test number 1) and any individual rate during the first 10 days of positional testing.
- ^ the temperature error of the movement, expressed in seconds/degree.
- ^ figure obtained by subtracting the average mean daily rate of the first two days of testing from the mean daily rate of the last test day.
- ^ F. von Osterhausen, Wristwatch Chronometers: Mechanical Precision Watches and Their Testing (Schiffer; 2ed., Atglen, 1997)
- ^ http://montresuisses.blogspot.com/2006/07/vintage-chronometer-standards-1961-1973.html
- ^ Source: courtesy of "Contrôle Officiel Suisse des Chronomètres", CH-2301 La Chaux-de-Fonds, Switzerland, email: info@cosc.ch[dubious – discuss]
- ^ Better quality as explained here (PDF file).
- ^ Compare, Can a non-certified watch meet the precision criteria of a chronometer? No, as the components of a chronometer are of a better quality and the care granted to its assembly and its setting cannot be compared. See cosc.ch FAQ.
- ^ Can a non-certified watch meet the precision criteria of a chronometer?
- ^ F. von Osterhausen, Wristwatch Chronometers: Mechanical Precision Watches and Their Testing (Schiffer; 2ed., Atglen, 1997), at page 28, table 38; page 59.