Jump to content

Aid climbing

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 96.235.33.23 (talk) at 05:36, 7 July 2010 (→‎Technique). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Aid climbing is a style of climbing in which standing on or pulling oneself up via devices attached to fixed or placed protection is used to make upward progress.

The term contrasts with free climbing in which progress is made without weighting artificial aids: a free climber ascends by only holding onto and stepping on natural features of the rock, using rope and equipment merely to catch them in case of fall and provide belay.

In general, aid techniques are reserved for pitches where free climbing is difficult to impossible, and extremely steep and long routes demanding great endurance and both physical and mental stamina. While aid climbing places less emphasis on athletic fitness and raw strength than free climbing, the physical demands of hard aid climbing should not be underestimated.

Aid is sometimes errantly referred to as "Class 6" climbing, since its reliance on ascent via one's equipment rather than merely being protected by it is regarded by purists as falling outside the traditional Classes 1-5 Yosemite Decimal System rankings that rely on making progress with one's hands and feet in direct contact with the rock alone. Aid climbing has its own ranking system, using a separate scale from A0 through A5.[1]

Technique

In a typical ascent with aid the climber places pieces of equipment ("protection") in cracks or other natural features of the rock, then clips an aider (a ladder-like device, also called stirrup or étrier) to the protection, stands up on the aider, and repeats the process.

Just as in free climbing, the usual aid technique involves two climbers, a leader and a belayer. The leader is connected by a rope to the belayer, who remains at one spot (the "belay station") while the leader moves up. As the leader advances, the rope is let out by the belayer, and clipped by the leader into the pieces of protection as they are placed. If the leader falls, the belayer locks off the rope and, assuming the protection doesn't rip out, catches the leader's fall on the rope. When the leader, moving up, reaches the end of the rope, or a convenient stopping point, he or she builds an anchor, hangs on it, and fixes the rope to it. This then becomes the next belay station. The belayer then ascends the fixed rope using mechanical ascenders, retrieving the protection that was placed by the leader. Meanwhile, the leader sets up a hauling system and, using another rope brought up for that purpose, hauls up a bag (the "haul bag" or "pig") containing the climbers' food, water, hammocks or "Porta-ledge", sleeping bags, and so on. Many variations on this basic technique are possible, including solo aid climbing and climbing with a team of three.

Until the 1940s the only protection was the piton, driven into a crack in the rock with a hammer. Today, aid climbing uses a considerably larger array of hardware than the pitons used by the first climbers although the primary technique of ascension has not much evolved. The typical gear of an aid climber includes pitons, hooks, copperheads, nuts, camming devices, ascenders, hauling pulleys, aiders, daisy chains, and wall hammers. The invention of camming devices or "friends" and other non-damaging rock gear has resulted in the practice of clean aid, where nothing is hammered, a great bonus for popular routes which could be disfigured from continual hammering.

The hardest aid routes are poorly protected and the climber must make long sequences of moves using hooks or tenuous placements. On these routes, a climber may have to commit to moving up onto the most marginal of placements. For example, if a copperhead is pounded into a shallow crease in a rock, and if it rips, the climber is in for a wild ride, as a whole string of tenuous pieces rip out one by one.

History

Until the 1960s or so, aid climbing was normal practice in most climbing areas. But as improvements in technique and equipment meant that many aid routes could be climbed free, some influential climbers began to criticise the use of aid as being against the spirit of mountaineering. Reinhold Messner wrote, "Rock faces are no longer overcome by climbing skill, but are humbled, pitch by pitch, by methodical manual labour … Who has polluted the pure spring of mountaineering?" (from "The Murder of the Impossible").

Free climbing is now the mainstream of climbing. But aid climbers have answered the criticism of Messner and others by climbing routes where the absence of holds or features in the rock make free climbing impossible, and by eschewing purely mechanical techniques (such as repetitively drilling bolts).

Today, many routes which were originally done using aid are being climbed free by a new generation of climbers with immense skill, physical ability, and significantly advanced equipment including modern ropes, sticky rubber shoes, and modern camming devices. Ironically, some of the techniques used to achieve free ascents of aid routes, for example placing extra bolts for protection (retro-bolting), are now sometimes thought to have "polluted the pure spring of mountaineering" by destroying the route as it was climbed by the first ascenionists. The solution is often a compromise in which an absolute minimum of bolts is added to allow safe protection for free climbers, while not totally destroying the challenge of the route as an aid climb. However, as with most compromises, this is not a solution that satisfies everyone.

Grading

The A grading scale (A for 'artificial' or 'aid') incorporates difficulty of placing protection, and the danger associated with falling. The original scale was a closed gradation scale from A0-A5, modern aid climbers have adopted "new wave" grading which compresses the scale but still uses A0-A5. A parallel scale of C0-C5 has been used to describe routes which can be climbed clean.[2][3] Clean in this context refers to routes that be completed without a hammer and the associated pitons even if the route still uses previously installed expansion bolts.

  • A0 Pulling on solid fixed gear.
  • A1 Easy aid, no risk of any piece of protection pulling out. Safe falls.
  • A2 Moderate aid. Short sections of tenuous placements above good protection.
  • A2+ May include easier A3 moves but is not hard enough to be rated as such.
  • A3 Hard aid. Involves many tenuous placements in a row.
  • A3+ May include easier A4 moves but is not hard enough to be rated as such.
  • A4 Runout, complex and time consuming. Many body weight placements.
  • A4+ May include easier A5 moves but is not hard enough to be rated as such.
  • A5 Serious, hard aid with huge falls and possibly lethal results. No bolts or rivets.

Literature

Long, John and John Middendorf, Big Walls, Chockstone Press, Evergreen, Colorado, 1994. ISBN 0-934641-63-3

References

  1. ^ Mountaineering: The Freedom of the Hills (6th ed.). Seattle: The Mountaineers. ISBN 0-89886-426-7
  2. ^ http://www.supertopo.com/
  3. ^ Big wall climbing: elite technique, Jared Ogden, p. 60, Clean Aid Ratings