Truck camper

A truck camper

In North America the term truck camper and its derived acronym TC, are generally used to refer to any recreational vehicle or RV that may be carried in the bed of a pickup truck. In North America, this RV type is sometimes known as a slide-in or cab-over.

In English-speaking Europe the term demountable or dismountable is more frequently used, and in Australia, the term slide-on is used to describe RVs of this type.

History

Truck campers are usually considered the most versatile form of recreational vehicle. They are capable of going virtually anywhere a pickup truck can go.

The earliest truck campers date to the mid-40s and appeared almost at the same time. They were the Cree Truck Coach build in Marcellus, Michigan by Howard Cree and the Sport King build by Walter King's company in Torrance, California. King build the first cab-over camper. The first Cree models were displayed at a sports-and travel show at Navy Pier in Chicago in 1945.

The truck camper has gone through an evolution in development that places it on par with many larger and more expensive RV types in terms of amenities.

North America's largest truck camper manufacturer is Lance Camper Manufacturing Corporation of Lancaster, California, followed by Arctic Fox of La Grande, Oregon. Truck campers continue to be most popular in the Western United States and Canada, and this is where most manufacturers are headquartered. They are slowly making inroads into the eastern part of the continent as the baby boomer generation retires, and are looking for comfort combined with freedom and versatility. The truck camper is also becoming a very popular RV type in Australia, where rugged terrain makes them a practical choice.

Features & Classification of Truck Campers

Technically speaking, any RV that can be easily dismounted from its carrying vehicle qualifies as a truck camper. In Australia it is very common to see them mounted on flatbed trucks, or even on what, in North America, would be considered a car.

The lines of definition can blur between a truck camper and a Class C with some Expedition vehicles like the XPCamper or the Earthroamer. Modern truck campers contain most of the amenities found in larger RV types, including refrigerators, stoves, furnaces, ovens, microwaves, bathrooms, showers, etc. Many modern truck campers utilize "slides", which are a movable sections of exterior wall, usually containing the dinette.

Truck campers are loaded and off-loaded to a vehicle utilizing four corner jacks which enable the camper to be raised, and the truck backed up underneath. The camper is then secured to the vehicle with chains or spring-loaded tie-downs.

Truck campers are a popular choice for horseback riders, fishermen, hunters, and other sportsmen as a boat or horse trailer may be easily towed. They facilitate camping "off-road" in relative comfort.

A good quality truck camper can cost as much as a much larger RV. All the amenities have to be put into a much smaller package, and the RV has to be able to tolerate the abuse of rough roads.

There are different classes of RVs generally labeled as truck campers:

Clamshell

The clamshell construction is utilized by two Canadian manufacturers, Bigfoot and Northern Lite and consists of two fiberglass shells, joined horizontally, at the center.

Hardside Filon, Wood Framed

This is a camper using wood framing (usually fir), finished in Filon, a thin fiberglass layer on a wood backing.

Hardside Filon, Aluminum-framed

This is a camper using aluminum framing, finished in Filon, a thin fiberglass layer on a wood backing.

Hardside aluminum

This is a camper using wood or aluminum framing, finished with aluminum siding.

Pop-up

A low-profile truck camper designed to cut back on weight and wind resistance. Construction techniques may utilize any of the above methods except Clamshell. The roof may be raised by mechanical means to add height while camping. There are two types prevalent in the industry: soft-walled, utilizing a fabric (canvas or Weblon), or the hard-walled, solid frame unit. Examples include Four Wheel Camper (softwall), Outfitter, Northstar (softwall), Hallmark (softwall), or Alaskan Camper(hardwall).

Campers with slides

These are campers with a one or more movable wall sections. These sections known as "slides", and increase the interior living space. Some contain only the dinette, others, called "full wall" slides, may contain the dinette, the fridge and other appliances. Examples are Snow River, Arctic Fox, Lance, Okanagan, Adventurer and Host. Companies currently producing double slides are Lance, Adventurer and Host. Host produces a triple-slide model. A slide is currently only possible in campers with frame construction, not pop-ups or fiberglass clamshell types.

Suitable truck types

Larger North American pickup trucks are generally the best for carrying a truck camper, although many manufacturers produce units for lighter duty European and Japanese models. The gross vehicle weight rating (GVWR) of a truck is the figure used to determine what size camper may be carried. The GVWR, minus the weight of the truck with passengers and fuel is the payload that the truck may legally carry. Stability can be improved by the addition of a sway bar, add-on overload springs (such as Supersprings) or inflatable airbags on the rear suspension. Products like Torklift's "Stableloads" can also be utilized to allow earlier engagement of factory overload springs, improving stability in cornering. Suspension modifications do not increase the legal carrying capacity of the truck, but can improve safety and handling. Most campers are rated at their "dry weight" which is the weight of the camper less any fluids like fresh water or sewage, and any possessions or add-ons that may add to the total weight. These need to be taken into account when determining the maximum size camper a truck may carry. Tires and braking capacity are also two important factors when determining maximum payload. It should be noted that the total axle capacity is always higher than the GVWR. Tires and braking are frequently the rate determining factor, from a safety point of view.

Pickups come in many different varieties; Single Rear Wheels (SRWs), Dual Rear Wheels (DRWs) ,short bed, long bed, gas, diesel, 1/2 tons, 3/4 tons and 1 ton and up. There are also other factors in the equation such as tire rating. A large enough truck should be used to handle the payload of the camper. A DRW will provide more stability and payload than an SRW, however a DRW is more likely to get stuck in snow or sand, and is not as easy to drive around when the camper is off. A one ton truck will carry more than a 3/4 ton truck, which in turn will carry more than a 1/2 ton truck. There is a significant frame difference between a 1/2 ton truck and a 3/4 truck. The frames on a 3/4-ton and 1-ton truck are essentially identical, Only the suspension and axles tend to vary, as the 1-ton has dual rear wheels available.

A diesel engine will provide more torque, better hill climbing capability and provide better fuel economy. However the initial investment is higher, the trucks dry weight is more and the weight is mostly on the front tires causing ballast issues when unloaded.

A long-bed truck is better suited for most campers. It is very important that the center of gravity of a truck camper be located forward of the rear axle. This is far easier to accomplish with a long bed truck. Some manufacturers do produce campers specifically for short bed trucks or at least interchangeable with long beds.

Tire & Rim upgrade

Carrying capacity and safety may be enhanced by replacing the standard 16 or 17 inch wheels found on most pickups with 19.5-inch rims, which will handle higher load rated F and G Class tires, rather than the normal recommended E-Class. These tires have more plys and are stiffer, but are less suited to use on sand or in snow. Two companies produce 19.5-inch rims for pickups that simply bolt on to existing hub, Vision and Rickson.

• Alcoa makes 19.5-inch rims for the Ford Super Duty F-450 class 4 pick up truck made between 2008-2010.

Shows and rallies

There are several RV shows each year featuring truck campers. The major Truck Camper Show held bi-annually in the US Midwest features truck campers exclusively. This is usually combined with a national rally. It is currently suspended due to economic conditions in the industry (2008-2012). Check its website for any updates in status.

Many truck camper clubs hold rallies throughout the United States, Canada, Australia, and Europe. The North American Truck Camper Owners Association (NATCOA), in conjunction with the Lance Owners of America (LOA), hold annual rallies, in October, in Washington State & Florida. The mid Atlantic organization holds an annual rally, in May, in Virginia. Rally Dates and information are usually listed at Truck Camper Events

Organizations and manufacturers

The North American Truck Camper Owners Association is a non-profit organization representing manufacturers & users of Truck Campers. It also runs the national show.

A listing of worldwide truck camper manufacturers may be found here

See also

• List of truck types
• Pickup truck
• Caravan parks
• RV park
• Recreational Vehicle
• Campervan