Jump to content

Heckler & Koch UMP

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Thunderpower (talk | contribs) at 03:12, 8 November 2006 (→‎Variants). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Heckler & Koch UMP
File:UMP 45.jpg
HK UMP45 (.45 ACP)
TypeSubmachine gun
Place of originGermany
Production history
ManufacturerHeckler & Koch
Specifications
Mass2.3 kg (5 lb) loaded (UMP45)
2.1 kg (4.6 lb) loaded (UMP40, UMP9)
Length450 mm (17.7 in), stock folded
690 mm (27.2 in), stock extended
Barrel length200 mm (8 in)

Cartridge
ActionBlowback, closed bolt
Rate of fire600 round/min
Effective firing range100 m
Feed system
  • 25-round detachable box magazine (UMP45)
  • 30-round detachable box magazine (UMP40, UMP9)

The UMP (Universale Maschinenpistole, German for "Universal Submachine Gun") is a submachine gun developed and manufactured by Heckler & Koch.

Overview

The UMP is a blowback-operated, magazine-fed, shoulder-fired submachine gun firing from a closed bolt. As originally designed, the UMP is chambered for larger cartridges than other submachine guns like the MP5. This was done in order to provide more stopping power against unarmored targets, albeit at the cost of a somewhat shorter effective range compared to the 9 x 19 mm MP5. Using a larger cartridge also results in more recoil, making the weapon more difficult to control when firing in fully automatic mode. To counter this effect, the cyclic rate of fire was decreased to around 600 rounds per minute (or 10 per second), making it one of the slower submachine guns in the market. Such a slow rate of fire makes burst-fire settings impractical; yet, many users cite the practicality of the 2- or 3-round burst setting as a desirable feature in a submachine gun.

Despite these shortcomings, the UMP is regarded as a reliable and useful submachine gun. Additionally, the UMP9 (the 9 x 19 mm version of the UMP) is almost 0.45 kg (almost 1 lb) lighter than its MP5 counterpart. It is constructed of mostly polymers, to decrease weight and reduce the number of parts that can become susceptible to damage from corrosion.

The UMP is currently available in four trigger group configurations, featuring different combinations of semi-automatic, 2-round burst, fully automatic, and safe settings. It features a side-folding buttstock to reduce its length during transport. The standard viewing sights consist of an aperture rear sight and front ring with a vertical post. It can mount four Picatinny rails (one on top of the receiver, and one on the right, left, and the bottom of the handguard) for the attachment of accessories such as optical sights, flashlights, or laser sights. Vertical foregrips can be attached to the bottom rail for increased controllability during burst and automatic fire.

The UMP was designed as a replacement for the Heckler & Koch MP5. It was designed to be less expensive and lighter than its larger cousin. While it has proven largely successful in the field, the UMP has not replaced the MP5 as intended, but rather acts as a compliment to it.

Variants

File:Cssump.jpg
The UMP45 as it appears in Counter-Strike: Source.

There are three versions of the UMP: the UMP45, firing a .45 ACP cartridge; the UMP40, firing a .40 S&W cartridge; and the UMP9, firing a 9 x 19 mm Parabellum cartridge. Apart from the different chambering, all versions feature the same basic design, the most noticeable difference being the curved magazine used on the UMP9.

All three versions of the weapon can be converted to any of the available chamberings via replacement of the bolt, barrel, and magazine.