Photoflash battery
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
A photoflash battery is a specialized zinc-carbon battery optimized to provide a high electric current output for a short duration of time, such as required to fire a flashbulb. Service life for this battery in flashlight service is short, since flashlights required a lower but continuous long duration current.
Photoflash cells were in production during the flashbulb era, and were slowly phased out as alkaline cells came into general usage. The photoflash cell was produced as a 1.5 volt size D, C Size and AA Size.
The cathode (the material packed between the carbon rod and zinc shell) of a zinc-carbon cell is generally made of powdered carbon black (or acetylene black), manganese dioxide and electrolyte. The MnO2 to carbon ratios vary between 10:1 and 3:1 for general purpose cells. A 1:1 mixture is used for photoflash batteries. This allows a high current output with intermittent use, perfect for photoflash use.These cells have reduced capacity compared to those with a higher content of MnO2.[1]
Another common type of photoflash battery was a higher-voltage series assembly of cells, often totalling 22.5 volts, used in battery–capacitor flash units. The battery slowly charged a capacitor, which then was discharged through a flashbulb to provide the heavy pulse of current to set off the bulb. [citation needed]. Higher voltage photoflash batteries were also made to fire reuseable strobe tubes. The strobe tubes required a high voltage. Eveready battery manufactured a 240 volt battery for such use. It was the Eveready 491 (NADA 729). Also offered by Eveready was a model 497 Battery capable of 180 volts as well as 510 volts.
See also
References
- ^ David Linden, Thomas B. Reddy (ed). Handbook Of Batteries 3rd Edition. McGraw-Hill, New York, 2002 ISBN 0-07-135978-8 Chapter 8
External links