Template:AUS-WAint/sandbox

LGA	Location	km	mi	Destinations	Notes
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Template documentation[view] [edit] [history] [purge]

This is a template for generating an intersection or exit for a Western Australia road article. It is a member of the {{Jctint}} suite of templates.

General usage

This is the basic syntax you need to get a complete intersection table. Just copy and paste the code below:

{{AUSinttop}}
{{AUS-WAint
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

...and fill in the variables! For more entries, use this:

{{AUS-WAint
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Within a single LGA

If a road is entirely within a single local government area, you may omit the LGA column by using the following code:

{{AUSinttop|noLGA=yes}}
{{AUS-WAint
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

Just copy and paste the above code, and fill in the variables! Also note that the table should be preceded by line explaining the omitted column, such as:

The entire freeway is in the [[City of Mitcham]].

For more entries, use this:

{{AUS-WAint
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Parameters

For the above parameters, here's what you should fill in:

• LGA: The name of the local government area in which the intersection is located. Full wiki markup is required, for example |LGA=[[City of Mitcham|Mitcham]]. Parameters such as LGAC can be used instead to avoid using full wiki markup (see below)
• LGAspan: number of rows the LGA spans. If value=1, omit this parameter. If set, LGA (or LGAC etc.) should be omitted from the other rows it spans.
• location: the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, Western Australia, so if the intersection is in multiple suburbs, you must use location_special (see below).
• lspan: number of rows the location spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans
• type: use to specify a shading for that intersection's row. The permitted types are:
  • closed: for highway intersections or interchanges that are now closed to traffic
  • mplex or concur: for a route multiplexing terminus or concurrencies.
  • trans: for a route transition – from one route number to either another route number, or a section without a route number, along a named road
  • unbuilt: for unbuilt roadway intersections/interchanges.
  • incomplete: for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.)
  • hov for interchanges that are only for High occupancy vehicle lanes
  • toll or etc for an interchange where tolls or electronic tolls are collected
  • Note: If the type parameter is used, the table must include a colour key at the bottom of the table. Use the |keys= parameter in {{jctbtm}} to generate a compliant legend.
• km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres (see below)
• road: road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations>
  • Generate route shields using {{AUshield}}
  • If there are multiple roads (i.e. intersecting road changes name at this intersection), use a slash (/) to separate roads
  • Generate an ndash (–) and wikilinked destinations using {{WAcity}}
  • If destinations are to be entered manually, an ndash can be generated by the HTML character code –
• notes: any notes regarding that junction. This must include an explanation for any usage of the type-generated shading.

Additional Parameters

In addition to those in the basic syntax, the following parameters may be used:

• LGA_note: a note that appears in small text below the LGA
• location_special: (replaces location) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup. {{SAcity}}, {{VICcity}} etc. are a useful shorthand.
• km2: use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route.
• uspan: number of rows the units spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans.
• rcspan: number of columns the road cell spans-if value=1, omit this parameter. Set |rcspan=2 to generate a left aligned cell that spans both the destination and notes column. Do not use for features such as a rivers and bridges - see place below. Important: if using this parameter, set |notes=none to avoid the notes cell spilling over the edge of the table.
• nspan: number of rows the notes spans—if value=1, omit this parameter. If set, notes should be omitted from the other rows it spans.
• place or bridge or tunnel: a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text.
• pspan or bspan or tspan: number of rows the above multicolumn cell spans-if value=1, omit this parameter.
• Parameters that replace LGA: The parameters in the table below allow you to enter the LGA name as plain text, and the template will generate the necessary piped link. For example, |LGAC=Mitcham will generate  Mitcham , which links to the Wikipedia article City of Mitcham

Parameter	Type of LGA (name of article on Wikipedia)
LGAC	"City of <name>"
LGA-C	"<name> City"
LGARC	"Rural City of <name>"
LGA-Co	"<name> Council"
LGADC	"District Council of <name>"
LGA-DC	"<name> District Council"
LGAM	"Municipality of <name>"
LGA-M	"<name> Municipality"
LGA-R	"<name> Region"
LGAS	"Shire of <name>"
LGA-S	"<name> Shire"
LGAAS	"Aboriginal Shire of <name>"
LGAT	"Town of <name>"

Any parameter which is empty can be omitted.

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:AUS-WAint in articles based on its TemplateData. TemplateData for AUS-WAint A template for making intersection tables. Template parameters[Edit template data] Parameter Description Type Status Exit number columns 1 For an exit number column, set to "exit". For exit number and old exit number columns, set to "old" Unknown optional State-cell span sspan Number of rows that the state cell spans, for interstate routes. For routes within a single state/territory, do not use this parameter Unknown optional LGA-cell span LGAspan Number of rows the LGA cell spans. If value=1, omit this parameter. If set, LGA (or LGAC etc) parameters should be omitted from the other rows it spans. Default Number optional Local government area LGA The name of the local government area in which the intersection is located. Full wiki markup is required, for example: [[City of Mitcham|Mitcham]] String required Local government area - City of ____ LGAC Name of the local government area, when the name is of the form "City of NAME" Unknown optional Local government area - ____ City LGA-C Name of the local government area, when the name is of the form "NAME City" Unknown optional Local government area - Rural City of ____ LGARC Name of the local government area, when the name is of the form "Rural City of NAME" Unknown optional Local government area - ____ Council LGA-Co Name of the local government area, when the name is of the form "NAME Council" Unknown optional Local government area - District Council of ____ LGADC Name of the local government area, when the name is of the form "District Council of NAME" Unknown optional Local government area - ____ District Council LGA-DC Name of the local government area, when the name is of the form "NAME District Council" Unknown optional Local government area - Municipality of ____ LGAM Name of the local government area, when the name is of the form "Municipality of NAME" Unknown optional Local government area - ____ Municipality LGA-M Name of the local government area, when the name is of the form "NAME Municipality" Unknown optional Local government area - ____ Region LGA-R Name of the local government area, when the name is of the form "NAME Region" Unknown optional Local government area - Shire of ____ LGAS Name of the local government area, when the name is of the form "Shire of NAME" Unknown optional Local government area - ____ Shire LGA-S Name of the local government area, when the name is of the form "NAME Shire" Unknown optional Local government area - Aboriginal Shire of ____ LGAAS Name of the local government area, when the name is of the form "Aboriginal Shire of NAME" Unknown optional Local government area - Town of ____ LGAT Name of the local government area, when the name is of the form "Town of NAME" Unknown optional LGA_note LGA_note A note that appears in small text below the LGA Unknown optional location location the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, <state>, so if the intersection is in multiple suburbs, you must use the "location_special" parameter String suggested location_special location_special (replaces "location" parameter) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup. Unknown optional lspan lspan number of rows the location cell spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans String optional lcspan lcspan number of columns the location cell spans—if value=1, omit this parameter. If set, LGA and/or state cells should be omitted from this rows Unknown optional lcalign lcalign Alignment of the location cell, if "lcspan" parameter is used. Can be set to "left", "right", or "center" Unknown optional type type use to specify a shading for the intersection's row. The permitted types are: "closed" for highway intersections or interchanges that are now closed to traffic; "concur" for a route concurrency terminus; "trans" for a route transition – from one route number to either another route number, or a section without a route number, along a named road; "unbuilt" for unbuilt roadway intersections/interchanges; "incomplete" for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.); "hov" for interchanges that are only for High occupancy vehicle lanes; "toll" or "etc" for an interchange where tolls or electronic tolls are collected Unknown optional unit unit no description Unknown optional km km km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres Number suggested km2 km2 use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route Number optional units-cells span uspan number of rows the units cells spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans. Unknown optional old old Old exit number Unknown optional ospan ospan number of rows the old exit number spans—if value=1, omit this parameter. If set, "old" parameter should be omitted from the other rows it spans Unknown optional exit exit Exit number Unknown optional espan espan number of rows the exit number spans—if value=1, omit this parameter. If set, "exit" parameter should be omitted from the other rows it spans Unknown optional road road road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations> ; Generate route shields using {{AUshield}; If there are multiple roads (ie intersecting road changes name at this intersection), use a slash (/) to separate roads; Generate an ndash (–) and wikilinked destinations using {{ACTcity}}, {{NSWcity}}, {{VICcity}} etc; If destinations are to be entered manually, an ndash can be generated by the HTML character code &ndash; String required rspan rspan number of rows the road cell spans—if value=1, omit this parameter Unknown optional rcspan rcspan number of columns the road cell spans—if value=1, omit this parameter. if using this parameter, set the "notes" parameter to "none" to avoid the notes cell spilling over the edge of the table. Unknown optional notes notes any notes regarding that junction. This must include an explanation for any usage of the type-generated shading. Unknown suggested nspan nspan number of rows the notes spans—if value=1, omit this parameter. If set, the "notes" parameter should be omitted from the other rows it spans. Unknown optional place place bridge tunnel a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text. Unknown optional pspan pspan bspan tspan number of rows the place/bridge/tunnel multicolumn cell spans—if value=1, omit this parameter. Unknown optional

See also

• {{jctname}}, {{AUshield}} and {{WAcity}}, are templates used to generate route shields and wikilinked destinations
• {{AUSinttop}}, a template that generates a MOS:RJL-compliant header for the junction list
• {{jctbtm}}, a template that closes the junction list table
• {{jcttop}}, {{CTint}}, {{ILint}}, {{INint}}, {{MIint}}, {{MNint}}, {{NHint}}, {{NYint}}, {{OHint}}, {{PAint}}, {{VTint}}, {{WIint}} are other templates in the {{Jctint}} suite, used in American road junction lists
• {{jctbridge}}, a template that generates rows for bridge crossings
• {{jctco}}, a template that generates rows for counties without junctions
• {{jctgap}}, a template for generating a row for a gap in the route
• {{jcttunnel}}, a template that generates rows for tunnel crossings
• {{jctrestarea}}, a template that generates rows for rest areas, service areas and the like

The above documentation is transcluded from Template:AUSintcore/doc. (edit | history)
Editors can experiment in this template's sandbox (edit | diff) and testcases (create) pages.
Subpages of this template.