Metal detector
Metal detectors use electromagnetic induction to detect metal.
In 1881, Alexander Graham Bell constructed a crude metal detector in an attempt to find an assassin's bullet in President James Garfield. Gerhard Fischer patented a portable version in 1931.
Upright "archway" detectors are used at entrances to secured buildings, such as courthouses or airports, to detect metallic weapons which may be brought in. Small portable "wand" detectors are used by security staff to frisk persons for the same. Larger portable metal detectors are used by archaeologists and treasure hunters to locate metallic items, such as jewelry, coins, bullets, and other various artifacts buried shallowly underground.
There are three types of metal detectors: beat frequency oscillator, induction balance, and pulse induction.
- In a beat frequency oscillator detector, a coil is used as an inductor in an oscillator, whose frequency changes when metal causes its inductance to change. Another oscillator produces a close frequency, and audible beats between them signal metal.
- In an induction balance detector, there are two coils, usually gibbous with about 10% overlap, and a sine wave is transmitted with one coil and received with the other. The coils are adjusted so that there is no signal in the receive coil when there is no metal nearby.
- In a pulse induction detector, a pulse is generated (usually by cutting off an inductor) and sent through a coil and the detector listens for echoes.
Metal detectors and archaeology
The use of metal detectors to search for archaeological finds is practised both by archaeologists and hobbyists. In some European countries including France, Italy and Sweden the use of a metal detector is forbidden by law, unless one has special permission. This is intended to protect archaeological sites but rarely means that illicit metal detecting ('nighthawking') does not take place and has the effect that new sites found by metal detector are never publicised or investigated fully. Instead, they are slowly plundered for their metal items, disturbing the stratigraphy and forcing the artefacts on to the Black Market, never to be seen again.
One of the main causes of driving the hobby underground is the inability of some within the detectorist world to come to terms with fellow detectorists who fail to record their finds for future generations.
In the United Kingdom metal detecting is generally permitted provided certain criteria are met and efforts are made to record finds through the Portable Antiquities Scheme. The scheme has critics however, including some archaeologists and some metal detectorists themselves.
Countries with no restrictions or methods to deal with new finds in place are in danger of sites being regularly raided and their contents sold on without the information they provide ever being known. However, there are some responsible metal detectorists in unrestricted nations who contact archaeologists when they find artefacts, and who never dig. They try to benefit archaeology by finding artefacts for scientists.
Archaeologists use metal detectors to scan their spoil heaps and also to examine wide areas such as battlefield sites where surface scatters of metal objects may be all that survives. New metal detectors have small screens near the handle.
See Also
See also
External Links
- Coin Community Metal Detecting Forum - A free coin, currency, and metal detecting community. Novice collectors to experienced dealers gather here to share knowledge.
- A United Kingdom-based metal detector forum