Wikipedia:Requested articles/Applied arts and sciences/Engineering

Add your request in the most appropriate place below.

Before adding a request please: Search for existing articles on the same subject. If an article exists, but not at the title you expected, you can create a redirect. Check spelling and capitalization. Be sure the subject meets Wikipedia's inclusion criteria. For scientific terms to be included in Wikipedia, they should be sourced to a textbook or academic publication; try searching Google Books, PubMed and Google Scholar. Also, when adding a request, please include as much information as possible (such as webpages, articles, or other reference material) so editors can find and distinguish your request from an already-created article.

Aeronautical/Aerospace

• Template:Req - Gateway Galactic is a company developing an orbital fuel depot: http://www.gateway-galactic.com

• Template:Req - Antaios is an orbital fuel depot being developed by Gateway Galactic: http://www.gateway-galactic.com/antaios

• Template:Req - [1] Of note because it is the first Caribbean based aircraft manufacturer. This company has a wing design of unusual characteristics and also has unique approaches to Calvinistic Corrosion that are of note.
• Template:Req Quality Management Systems Standard - requirements for aviation, space and defense distributors
• Template:Req - valve consisting of a blade mounted on an axis at one end, the axis being rotated rapidly (typically by a fast acting solenoid) and the end of the blade away from the pipe cuts a pipe preventing flow; valve can be used to enable or disenable high pressure cryogenic flow through a pipe, and by mounting two blades on a shared axis, two supply fluids can be permitted or prevented with high synchronisation very rapidly as in a bootstrapping starter on a rocket engine; pipe is fitted with two spring-loaded annular rings which normally fit so tightly that leakage is prevented; blade separates the annuli so rapidly that leakage is extremely small, either on opening or closing
• Template:Req Deployable antenna structures are required to generate the large apertures necessary for many space applications. Deployable mesh reflectors have been successfully used in telecommunications applications for several decades. The structures are lightweight and can be packaged in a compact form for launch. Once deployed, the antennas are rigid and can be built with surfaces accurate enough for Ka-band operation. Reflector mesh fabrics are available that are fine enough to be highly reflective at Ka-band, yet have relatively low mass. Space Antenna Handbook
• Template:Req - [2]
• Template:Req - in jet engines; so far a Wikipedia title only exists. MCT is professionally discussed in aviation engineering literature, flight control manuals, etc. See, for example, the article by Professor Krahe in the December 1996 Airbus Industries technical review (). Deserves an article.
• Template:Req
• Template:Req
• Template:Req - used in testing components of the James Webb Space Telescope for thermal expansion
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Oscar Carl Holderer, mechanical engineer who worked on German rockets in the forties adn was brought to the U.S. and worked on U.S. rockets. He died in May 2015, aged 95. (Chicago Suntimes, May 9, 2015, p. 33)
• Template:Req - recently used in amphibious aircraft ICON A5 for the first time
• Template:Req
• magneto-aerodynamics
• Template:Req - A world war one ship that has a balloon like a airship over it, that makes it fly
• Template:Req - A boundary in the context of the planar circular restricted three-body problem that can be used to construct low energy transfers.
• Template:Req - QuEST Global Services, is a diversified Product Development Solutions company.
• Template:Req - New propultion technology with recent tests at NASA, company name is Cannae, see http://www.wired.co.uk/news/archive/2014-07/31/nasa-validates-impossible-space-drive and http://cannae.com/
• Template:Req - NASA Jet Propulsion Laboratory engineer, lead rover planner for the Mars Curiosity mission. see: http://www.nasa.gov/mission_pages/msl/news/msl20121011.html & http://www.unmannedspaceflight.com/lofiversion/index.php/t7394.html

• Template:Req - An important technique used to improve inertial navigation in ground applications

Agricultural/Biological

• Template:Req - interdisciplinary field which uses mechanical formula and quantification to describe the cell behavior; also engaged with chemistry and medicine
• Template:Req - International Commission on Irrigation and Drainage cf. [3]

--Is this the same as the Multilingual Technical Dictionary? [4]

• Template:Req
• Template:Req - public agency covering over one million acres in Central California; flood control, hydropower and gas-fired power generation, groundwater management and fisheries management; [5]
• Template:Req- useful for the general public to find approved and non-approved GMO products with links to individual modified organisms that currently exsist on wikipedia
• Template:Req - do you mean Template:Req; his MIT page:[6]
• Template:Req
• Template:Req; limbitless-solutions.org

Chemical/Process

• Template:Req
• Template:Req
• Template:Req
• Template:Req - hat is the detail process?
• Template:Req
• Template:Req
• Template:Req (CEPCI)
• Template:Req as it is included in article
• Template:Req - iron-production process; 90% reduction in emissions
• Template:Req - [7]
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Goliat (oil platform) - Oil Platform on Goliat field
• Template:Req
• Template:Req
• Template:Req - Inventor of ECCtreme® ECA 3000 High Temperature Resin sources:[8][9]
• Template:Req - chemical-reaction engineering
• Template:Req - found in 1960s ceramics literature, designating raw materials; e.g.
• Template:Req
• Template:Req see http://www.sciencemag.org/content/321/5896/1658.abstract
• Template:Req
• Template:Req - used to determine the number of stages required in a distillation Coloumn
• Template:Req
• Template:Req - creating fire with chemicals
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req technology - conversion of recycled plastics to diesel fuel; see Thermolysis/Pyrolysis
• Template:Req
• Template:Req
• Template:Req
• Template:Req - calculation of diffusivity coefficient
• Template:Req
• Template:Req

Civil/Structural

• Template:Req - associated with the Warren-style truss bridge and girder design
• Template:Req - Old mill in Italy, needs entry in English - already in Italian Wikipedia. [10]
• Template:Req plastic floating ball used to cover reservoirs, minimizing evaporation and preventing chlorine from reacting with sunlight
• Template:Req -New branch of Structural Mechanics. It combines Fracture and Continuum Damage ideas with the concept of plastic hinge. It is used for the numerical simulation of the collapse of complex structures
• Template:Req - Widely used Hydrology & Hydraulics software since 1986. HydroCAD web site Google Engineering Tips ForumGoogle Scholar Customers
• Cement Paint
• California Seismic Safety Commission There seems to be one, I wonder what it does
• Template:Req - Unsealed post tension cables in concrete structure required the building to be declared unsafe and demolished ten years after construction in downtown Seattle
• Template:Req - need definition of sewer and other forms of this underground fluid transport existing in St. Paul, MN
• Template:Req - company who made a major contribution to the 2010 Winter Olympics in Vancouver, Canada, by building the roof of the Richmond Olympic Speedskating Oval; [11]; have also built several other famous projects like that of the roof of the visitor's center in Van Dusen Gardens; [12]
• Template:Req - Australian contractor; [13]; cited by many articles
• Template:Req - Manchester Based Consulting Engineers
• Template:Req - structural engineers for The Burj and the World Trade Center, New York
• Template:Req (APHC) - British trade association for plumbers and heating engineers
• Template:Req - type of Template:Req used by the U.S. Coast and Geodetic Survey surveyors; designed by Jasper Bilby in 1926; used from 1927 to 1984; each tower could be erected in a day with five people;[14]
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• (registration required)
• Template:Req - possible spelling error for the hypothesis discussed in Kirchhoff–Love plate theory
• Template:Req - largest tidal power plant in the world; built in S. Korea, August 2011; fully operational at September 15, 2011
• Template:Req
• Template:Req
• Template:Req
• Template:Req - Wastewater treatment process employing activated sludge microorganisms to promote denitrification of process mixed liquor using separate anoxic tanks or treatment phases, assisted by secondary source of carbon - (Wastewater Treatment / Design)
• Template:Req - pertains to foundation slab design
• Template:Req - also used to calculate beam deflection; similar to conjugate beam method
• Template:Req - KOERI Chairman of Earthquake Engineering
• Template:Req
• Template:Req
• Template:Req (OBASS)
• Template:Req (Pressuremeter test)
• Template:Req - structural analysis program by Robobat; commercial software
• Template:Req some kind of reinforcement substructure, has appeared in the news with respect to the San Francisco Bay Bridge eastern span cracking bolts issue
• Template:Req - type of construction form
• Template:Req
• Template:Req a drainage / erosion plastic ditch I've heard of through tradeshows and tradepubs. Gov. Bill Richardson fasttracked it in NM a couple years back
• Template:Req, i think it's related to drainage, may be similar to French Drain
• Template:Req - article(s) about turret presses and materials processing
• Template:Req - Valve Chamber in a municipal water distribution system
• Template:Req - something to do with venting gas safely; vertasefli
• Template:Req - something to do with a river?
• Template:Req Pipeline in Australia. Allows water from the Murray River to reach Adelaide and surrounding areas.
• Template:Req - something about blending aggregates
• Template:Req - de:Heinz Isler
• Template:Req - proposed plan to pipeline sea water from the sea to Xinjiang through Inner Mongolia, with the goal of increasing rainfall in the region from evaporation
• Template:Req - Firm of consulting Structural and Civil Engineers, with offices in London, Oxford and Nottingham. Provided services for Bishop Edward King Chapel and the Astley Castle restoration.

Duarte Pacheco, former Mayor of Lisbon (1938), former Minister for Public Instruction (1928) and Public Works and Communications (1932–36, 1938–43), former President of IST (1927–28, 1936–38), electrical engineering (1923) Dr robert j melosh The Robert J. Melosh Medal Competition was inaugurated in 1989 to honor Professor Melosh, a pioneering researcher in finite element methods

• Template:Req - Master Municipal Construction Documents. A set of standards all/most municipalities in BC, Canada adhere to, with specification on construction, tender, estimating, ect.

• half-slab

Design/Drafting

• Robert Benaim and Associates - consulting civil and structural engineers; created 1980 by Robert Benaim; sold 2007 to Scott Wilson
• Template:Req (BIMS) -BIMS primary goal: enhance the competency of the veterinarians to exploit information technology and the Internet to access the electronic knowledge base of biomedicine and use the computer and related digital technologies for systematic biomedical problem analysis and management; [15]
• [DeSimone Consulting Engineers, PLLC] - consulting structural engineers; Founded in New York City in 1969, the firm has grown to have offices worldwide. DeSimone performs structural analysis and design for all types of buildings at all project phases. www.de-simone.com
• Vinay Gupta - designer of Hexayurt structure and other disaster/aid technology
• Template:Req - in drafting

• "Multifab" manufacturing processes.
• Heterogeneous architecture, see also Heterogeneity (disambiguation), a general design/structure.

NCDOT 303d STREAM CLASSIFICATIONS

• design value - often appears for wood products (see http://www.wwpa.org/TECHGUIDE/DesignValues/tabid/855/Default.aspx). What is the "design value" and how to engineers use it to determine if a wood is suitable for their application?

Electrical

• Template:Req, a correction factor used in the design of electromagnetic machines
• Template:Req. Generally intended for use as harmonic filters. The term comes from the characteristic of a lossless half-wave transmission line wheron the input impedance is the same as that of the load connected to it. An example would be two cascaded Pi or T LC sections, each of which provides a 90 deg phase shift and an impedance inversion. Cascaded, at the design frequency, in the lossless case, the filter provides a fixed input-output voltage ratio independent of load. Practical realizations may have different topology and include devices to protect the filter components from excessive voltage/current. More details available: jeaston@ucsd.edu.
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• The Template:Req - a term from information theory; [16]
• Template:Req - inventor of the gray tube machine - relating to alleged free energy machines
• Template:Req - This relates to voltage regulation of AC synchronous generators or alternators
• Template:Req
• Template:Req or Template:Req - This relates to simplifying the analysis of Synchronous machines by eliminating time varying inductances by this transform
• Template:Req Distinguished Research Professor in intelligent control of modern variable speed wind energy conversion systems with application of H_infinity, Fuzzy Logic, LQG and other multiobjective paradigms for control. He has published widely on related issues of control for sustainable energy. He has several patents pending. Currently on engagement at the Alaska Center for Energy and Power (ACEP), Institute of Northern Engineering (INE), University of Alaska Fairbanks, USA.
• FCC Certification - every electronics part in use in commercial settings (in the USA) that is liable to emit radio waves needs FCC certification (see labels of any consumer item you have). Details of these certification classes, and the procedures for test would be covered in this article.

This seems to have been covered in Title 47 CFR Part 15 ? Edgepedia (talk) 18:30, 14 March 2012 (UTC)

• Template:Req IEC electronics shock specs.
• Template:Req - This is particularly helpful when genotyping
• Template:Req Distinguished Electronics Engineer with a remarkable creative mind producing valued innovations and patented inventions. He is a prolific science writer having published numerous influential books and articles.
• Template:Req
• Template:Req The impedance definition used in the characterization of current probes.
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req Rogers' Material most often refers to high frequency circuit material used in microwave PCB design and fabrication. Two families of materials are commonly used. These are R3000 Series and R4000 Series. RO4000 Manufacture's Page. RO3000 Manufacture's Page. Product Selection Guide. Scholarly article that references the material. Google Scholar search that references the material.
• Template:Req
• Template:Req Field of study.
• Template:Req Material Science related to the uses of electrical arc.
• Template:Req, Creator of the Onderdonk equation - the go to equation for Fusing Current
• Template:Req, Does good electric grounding help us to reduce our electricity bill from unwanted electricity in the circuit ?Wilsonkota (talk) 01:58, 13 April 2014 (UTC)
• Template:Req,Definition required for Battery performance. Hysteresis Losses etc. Mentioned in battery articles.
• Template:Req - Important in safe design of electrical devices WRT inrush currents. Fuses and semiconductor design. Good starting article -

Low Voltage Disconnect (LVD): a device that continually monitors battery voltage then disconnects the load when low voltage is sensed. It helps extend battery life by preventing over-discharge and protects equipment from operating at potentially low voltages.

• Template:Req
• Template:Req -- an alternative to single-input single-output systems. There are some links in control theory and other articles that *should* point here, but that instead point to MIMO (which is a radio thing) or MIMO (disambiguation).

Environmental

• Template:Req, the reasons why it is decided to make environmental management. Translated from the original article in Spanish from the Wikipedia link: [17].
• Template:Req, the only "clean coal" solution, a form of "chemical looping combustion" which already has a page but for (clean) coal specifically. It can be retrofitted to existing coal power plants knocking off 99% of the CO2 emissions. The Coal-Direct Chemical Looping method page can be linked in the See Also sections in both the "clean coal" and "chemical looping combustion" pages. Funding of the Coal-Direct Chemical Looping process by the Obama administration Fox News article about the process OSU news of ramping up production of the new method successful 203 hour test of a pilot power plant using coal-direct chemical looping at the Department of Energy 2012 study about the technology 2008 study about the technology
• Template:Req, a global environmental and sustainability consulting firm, part of the larger international Antea Group. Founder and facilitator of numerous industry organizations: Beverage Industry Roundtable, Healthcare Plastics Recycling Council, and Monetization Working Group. Regularly included in lists of the best and healthiest workplaces at a local and national level. [18] [19] [20] [21] [22] [23] [24]

Fluid mechanics

• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req (Frederick W. Lanchester)
• Template:Req
• Template:Req not sure what the original poster intended, but this does not seem specific enough to pinpoint an article. Critical length for laminar-to-turbulent transition? Critical length scale for continuum hypothesis to apply? Perhaps a redirect to these two topics is in order
• Template:Req Related to pipe flow; the line showing the total energy at any point in a pipe.
• Template:Req Boundary layer energy thickness
• Template:Req
• Template:Req and its effect on boundary layer development
• Template:Req
• Template:Req How to build and maintain a "flooded subfloor," a component of "green house" design.
• Template:Req
• Template:Req Important concept for understanding and designing pipe flow: an amount equal to the velocity head at the section
• Template:Req Standard development organization for pumps
• Template:Req Device for absorbing energy of flowing water in flood schemes etc
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req definition according to Pressurised System Safety Regulations 2000 (UK).
• Template:Req
• Template:Req
• Template:Req Commonly used in the nuclear industry for some applications. May be other applications
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req for both turbine and compressor. eta_thermal and w_net / Cp*T definitions+derivations
• Template:Req
• Template:Req
• Template:Req/telecontrol
• Template:Req

Instrumentation and controls

• Template:Req
• Template:Req
• Template:Req (aka Control System Functional Description)
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req - reflectance field capture instrumentation set-up 2000-present. Produces a collection of BSDFs over an XYZ space and normals or UV-field.
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req

Materials

A–M

• Template:Req (a type of synthetic yarn)
• Template:Req (with regard to helicopter dynamics)
• Template:Req (information on what you'd learn from a course in Aerospace Structures)
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req all carbon steels list c1018 steel, C-1045 TG&P, C1137, C12L14, Stressproof EMS-630A, C-1117, C-1144/EMS-630A, C-1018 TG&P, C-1215, Ledloy A MIL-S-13422A1, ASTM-A-108 1010 thru 1215, etc. Need strength to weight ratio, etc.
• Template:Req - just the oven itself, description, functioning.
• Template:Req (Many articles describe materials as antimicrobial but I was unable to find an article listing antimicrobial materials, treatments, categories of AM materials, etc.)
• Template:Req
• Template:Req (BMP)
• Template:Req
• Template:Req (calculating/converting blower psi from Dia. size, CFM, Max pressure (h2O) and Max Vacum (h2O))
• Template:Req - See this
• Template:Req
• Template:Req A solidified emulsion of silver, lead and copper requiring no lubrication when made into bearings and bushings.
• Template:Req
• Template:Reqs
• Template:Req
• Template:Req
• Template:Req - How creep machines work?
• Template:Req – a trade name for various lightweight (85%+) magnesium alloys from Dow Chemical[25]
• Template:Req
• Template:Req A trademarked material often used for knife and sword handles.
• Template:Req
• Template:Req An unwanted artifact which can occur during the polishing of a specimen for microstructural research
• Template:Req (topics about engine break-in of various engines)
• Template:Req
• Template:Req
• Template:Req
• Template:Req alloys for forming operations
• Template:Req - Improvement over Galvanized Coating Process and Galvanization
• Template:Req (printed circuit board) material - Differences between FR-4 and GETEK PCB materials [26]
• Guinier-Preston Zones
• Template:Req - a defect in metal (titanium)
• Template:Req - just the oven itself, description, functioning.
• Template:Req (A type of regenerative/recuperative heat exchanger)
• Template:Req (Discolouration of steel as a result of a heating process such as welding, forging etc.)
• Template:Req
• Template:Req - The Exploratorium has an article: [27] --Ian01 14:54, 31 July 2007 (UTC)
• Template:Req - the best existing composite material [28]
• Template:Req
• Template:Req - info on what is involved in industrial forging processes; the forging page has very little info
• Template:Req - a refractory insulating fibre that can be loose, woven, felted, etc.
• Template:Req
• Template:Req - a specific term in the oil and gas industry for the a type of steel used to make pipelines. Defined by API 5L (and other standards). It is distinct from pipeline casing and pipeline transport
• Template:Req
• Template:Req
• Template:Req - used to specify anisotropic material properties, esp. of 3d-printed materials whose strength depends on layer orientation. "MD" (machine direction) and "TD" (transverse direction) are used, but which is which?
• Template:Req - mentioned briefly at http://en.wikipedia.org/wiki/Flow_plasticity_theory#Elastic_regime, http://imechanica.org/node/16709
• Template:Req [29]
• Template:Req
• Template:Req
• monobloc steel - lots of mentions of it ref. bofors 57mm cannon and many navel guns and train wheels but noting actually why it is different to standard steel

N–Z

• (registration required) - [30]
• Template:Req
• Template:Req
• Template:Req
• Template:Req
• Template:Req - Piezoelectric paint is a very attractive piezoelectric composite in many fields, such as non-destructive testing, or structural health monitoring. [ http://iopscience.iop.org/0964-1726/21/4/045017 https://www.isma-isaac.be/past/conf/isma2010/proceedings/papers/isma2010_0549.pdf http://iopscience.iop.org/0964-1726/16/6/061 https://www.phmsociety.org/sites/phmsociety.org/files/phm_submission/2013/phmc_13_051.pdf http://www.crcnetbase.com/doi/abs/10.1201/9781439828434.ch409 http://resenv.media.mit.edu/classes/MAS967/haletuck99.pdf
• Template:Req
• Template:Req - (ODS)
• Template:Req [ http://www.rbnenergy.com/crude-loves-rocknrail-bitumen-by-rail-part-2 http://nwcoastenergynews.com/category/railbit/ www.kindermorgan.com/investor/presentations/0418_WF_DL.pdf‎]
• Template:Req [31]
• Template:Req - (catagories: welding, laser applications)
• Template:Req - an ASTM test of shear strength for composite materials
• Template:Req - Purpose, method, standards in regards to electrical steel etc.
• Template:Req
• Template:Req an assembly technique (plastic objects) -- category fasteners fr:Emboîtage élastique
• Template:Req - ability to take a cutting edge of, relative to stainless and plain-carbon steels.
• Template:Req
• Template:Req
• Template:Req, load string test, no-load string test (relating to compressor skid performance testing)
• Template:Req
• Template:Req (i.e. MIL-STD-810 and "Intrinsically Safe")
• Template:Req
• Template:Req (VDMA), a German association (machines and devices industry) [32]
• Template:Req
• Template:Req Strong plastic, used in industrial lighting.
• Template:Req plastic, quite common in stores, used in beer vessels and holders for electronic equipment for display for example cell phones, very difficult to find information.

Mechanical

flexible engine shaft

• Template:Req HyQ is a Hydraulically Actuated Quadrupedal robot.
• Template:Req Mechanical omnidirectional treadmill for virtual reality.
• Template:Req marine engineering, propeller and rudder drop measurements.
• Template:Req temperature scale.
• Template:Req popular book used for acoustic and vibration engineering.

• Template:Req in vibration condition monitoring and diagnostics of machines
• Template:Req - i.e. mineral filled plastics, etc.
• Template:Req - the process of removing un-needed material from an engineered part; usually these are injection molded items, but it could be any molded plastic part, or milled, cast, or forged metal
  • Boring (manufacturing) - Article exists.
• Template:Req - a common type of tooth patterns used on wheels and flat surfaces to grip pliable materials
• Template:Req - Applies biomechanical knowledge to answer certain questions of civil and criminal law.
• Template:Req or Template:Req — a machine described by Herodotus as used by the Ancient Egyptians to build the Pyaramids, composed of sideguides/sideguards, two fulcrums, using weight shifting, to lift large stone elements
• Template:Req - Used to provide driving torque between shafts and pulleys, gears sprockets [33]
• Template:Req - Phenomenon that occurs in pumps and can cause irreparable damage
• Template:Req
• Template:Req - dimensions of standard sizes and explanation of nomenclature including "keg"
• Template:Req
• Template:Req
• Template:Req
• Template:Req - crankless axial marine steam engine
• Template:Req
• Template:Req - Also called the 'rotary Atkinson cycle,' it is an alternative to the Wankel Rotary Engine who's compression and expansion are different, causing higher efficiency.
• Template:Req - as discussed in the article at [34]. It is discussed as a practical embodiment of a thermodynamic cycle different from the 'Brayton cycle' [35] (used in conventional Gas Turbines); and promising 15 to 20% greater fuel efficiency in large machines. THIS Request might be moved to a 'Thermodynamics' section, if there were one.
• Template:Req - acoustical phenomenon in a 3-leaf, 2-cavity assembly
• Template:Req - An engineer who created a set of over 200 mechanical movement models in the early 1900s. 120 of these models comprise the Clark Collection of Mechanical Movement Models at the Museum of Science in Boston. [36]
• Template:Req
• Template:Req - A method to manufacture spiral bevel gear oogle
• Template:Req - World's largest industrial pipe estimating program in Excel

Template:Req - Tool end fitting for bits and associated driver collet; frequently used in powered medical instruments

Template:Req - Micromachining processes; hybrid of ecm and edm

Template:Req - Tool end fitting for bits and associated driver collet; frequently used in powered medical instruments

Template:Req - Tool end fitting for bits and associated driver collet; frequently used in powered medical instruments

Template:Req - forces that act on materials

mineral processing/ ore dressing iron ore mineral processing/ iron ore dressing reverse flotation

Energy and power

• Template:Req
• Template:Req
• Template:Req
• Template:Req

• Template:Req
• Template:Req
• Template:Req
• Template:Req - C37.94-2002 - IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment
• Template:Req Perhaps #REDIRECT Energy audit ?
• Template:Req Class 9 Accidents for Nuclear Power Plants -- Beyond Design Basis Accidents
• Template:Req
• Template:Req Oil Country Tubular Goods
• Template:Req
• Template:Req

• Template:Req
• Template:Req
• Template:ReqCraig Pollock motorsport projet
• Template:Req
• Template:Req

Textiles

• Template:Req
• Template:Req
• Template:Req

Unsorted

• Engineering For Kids - Engineering For Kids brings science, technology, engineering, and math (STEM), to kids ages 4 to 14 in a fun and challenging way through classes, camps, clubs, and parties through hands-on learning. www.engineeringforkids.com
• various engineering departments in West Bengal, India
• osmotic sachet – used for water purification in humanitarian relief
• innovation consultant
• de:Hydraulische Weiche (probably hydraulic compensator, it:compensatore idraulico)
• Master of Industrial Practice - scheme funded by Gatsby Charitable Foundation, involving University of Greenwich, City and Guilds

Institute, Institute of Electrical Engineers and the Institute of Incorporated Engineers

• Over-Unity as Opposed to Perpetual Motion Some inventors and hobbyists have made a distinction between the term over-unity and the term perpetual motion. For example, many hobbyists consider over-unity to exist with a machine that inputs energy and uses the energy to somehow extract further energy. Nathan Coppedge uses the term over-unity to refer to the task of providing experimental evidence for the breaking of the first law of thermodynamics. These concepts of over-unity can be compared and contrasted to two further concepts: the concept of lossless energy, and the concept of virtual energy.

• Institute for the Advancement of Engineering
• Master of Sciences in Railway Engineering
• GT-Power (simulation software)
• 5G Innovation Centre The University of Surrey’s 5G Innovation Centre (5GIC) is funded by an £11.6 million investment from the Higher Education Funding Council for England (HEFCE) under the UK Research Partnership Investment Fund (UKRPIF), and supported by c. £34 million in pledged contributions from telecom service providers, network/device manufacturers and test equipment companies alongside with the UK’s communications regulator. Global companies and researchers within the 5GIC will develop and test solutions and standards for fifth-generation (5G) wireless technologies. (References: http://www.hefce.ac.uk/whatwedo/rsrch/howfundr/ukrpif/surrey/, http://www.hefce.ac.uk/whatwedo/rsrch/howfundr/ukresearchpartnershipinvestmentfund20122015/, http://recombu.com/digital/news/5gic-5g-test-bed-at-university-of-surrey-innovation-centre_M12368.html, http://www.mobileworldlive.com/uk-to-open-35m-5g-centre, http://www.techweekeurope.co.uk/news/5g-trial-uk-2013-4g-95408, http://www.bbc.co.uk/news/uk-england-surrey-22279326, http://www.electronicsweekly.com/university-electronics/university-of-surrey/5g-innovation-centre-develops-test-technologies-5g-wireless-systems-2014-02/)
• Comparison of Agile automation & management software