Jump to content

.17 HMR

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Malis-cs (talk | contribs) at 13:55, 29 July 2007 (interwiki - cs). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

.17 HMR
20 grain hollow-point .17 HMR rounds
TypeRifle
Place of originUnited States
Production history
DesignerHornady
Designed2002
Specifications
Parent case.22 WMR
Bullet diameter.172 in (4.4 mm)
Neck diameter.190 in (4.8 mm)
Shoulder diameter.238 in (6.0 mm)
Base diameter.238 in (6.0 mm)
Rim diameter.286 in (7.3 mm)
Case length1.058 in (26.9 mm)
Overall length1.349 in (34.3 mm)
Primer typeRimfire
Ballistic performance
Bullet mass/type Velocity Energy
17 gr (1 g) 2,550 ft/s (780 m/s) 245 ft⋅lbf (332 J)
20 gr (1 g) 2,350 ft/s (720 m/s) 250 ft⋅lbf (340 J)
Source(s): Hornady .17 HMR Page
A .17 HMR round (left) compared with a .22 Long Rifle round (right)
Left: 17 HMR, ctr and right: 25-06 Remington

.17 Hornady Magnum Rimfire, commonly known as the .17 HMR, is a rimfire rifle cartridge descended from the .22 Magnum. It was developed by necking down the .22 Magnum case to take a .17 caliber (4.5 mm) bullet. Commonly loaded with a 17 grain (1.1 g) bullet, it can deliver muzzle velocities in excess of 2550 ft/s (775 m/s). It is widely considered to be the most accurate of the rimfire cartridges.

Development

Left: 17 HMR, Right: 22 WMR

The .17 HMR round is similar to rounds developed by dedicated rimfire wildcatters who worked to create a rimfire cartridge with an exceptionally flat trajectory. These wildcatters were seeking to match the ballistics of the obsolete 5 mm (.20 caliber) Remington Magnum Rimfire, which was made from 1970 to 1974, and was to that point the fastest rimfire cartridge ever produced. With 5mm (.20 caliber) diameter barrels and bullets being virtually unavailable at the time (the 5mm RMR was the last commercial 5mm round until the 2004 release of the centerfire .204 Ruger), the commercially available .17 caliber became their bullet of choice. The .22 WMR was the logical parent case, as it was also the basis for the 5mm RMR, as it was commonly available and had a far larger and stronger case than the next larger .22 Long Rifle. The .17 caliber wildcats not only met, but far exceeded the 5 mm RMR's velocities and flat trajectory. The accuracy of these cartridges was also quite good. The downrange energy of the 5mm RMR is still superior to both .22 WMR and .17 HMR, however, so there is still potential in the 5mm rimfire for wildcatters.

Hornady, in conjunction with Marlin Firearms and Sturm, Ruger, followed much the same path. With the .22 WMR case as the starting point, a simple barrel change was sufficient for most .22 WMR firearms to chamber the new cartridge. In 2002 the first rifles and ammunition began appearing on the market, and the .17 HMR was an instant hit. While the ammunition was relatively expensive due to the high-performance .17 caliber bullets used, it was still cheaper than most centerfire ammunition. The availability of moderately priced and accurate firearms from Marlin and Ruger (leaders in the rimfire rifle market) plus the backing of a major ammunition maker allowed the .17 HMR to quickly gain momentum. Other makers of firearms and ammunition soon introduced .17 HMR offerings.


Availability

Due to the specialized bullets the .17 HMR uses, there is only a narrow range of ammunition available for it. The bullets generally weigh from 17 to 20 grains, and have expanding designs such has hollow points or soft points. The terminal ballistics of the lightweight expanding bullets limit the .17 HMR to the smallest of game animals and varmints. .17 HMR ammunition is less common and more expensive than the .22 caliber rimfire rounds, but this is changing as the popularity of .17 HMR rifles gathers momentum. In the UK, the .17 HMR round is favoured by many Police firearms licensing departments over the .22 LR, as due to its high speed it is thought less prone to ricochet.

.17 HMR rifles and ammo have continued to sell briskly long after gun retailers expected sales to have tapered off. Following the success of the .17 HMR, the .17 Hornady Mach 2, or .17 HM2, was introduced in early 2004. The .17 HM2 is based on the .22 LR case, but necked down to .17 caliber.

Manufactures and Brands

A growing number of companies offer .17 HMR ammunition. It is true that CCI actually loads all of the .17 HMR ammunition for the CCI, Federal, Hornady, and Remington brands. However, the ammunition is loaded with different bullets to different specifications 1.

See also