Jump to content

1-Bromohexane

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by LegionMammal978 (talk | contribs) at 13:54, 15 April 2021 (move PIN). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

1-Bromohexane
Ball and stick model of 1-bromohexane
Spacefill model of 1-bromohexane
Names
Preferred IUPAC name
1-Bromohexane[1]
Other names
  • Bromohexane
  • Hexyl bromide}
  • 1-Hexyl bromide
  • n-Hexyl bromide
Identifiers
3D model (JSmol)
1731290
ChemSpider
ECHA InfoCard 100.003.501 Edit this at Wikidata
EC Number
  • 203-850-2
MeSH 1-bromohexane
RTECS number
  • MO0925000
UNII
UN number 1993
  • InChI=1S/C6H13Br/c1-2-3-4-5-6-7/h2-6H2,1H3 checkY
    Key: MNDIARAMWBIKFW-UHFFFAOYSA-N checkY
  • CCCCCCBr
Properties
C6H13Br
Molar mass 165.074 g·mol−1
Appearance Colorless liquid
Density 1.176 g/mL
Melting point −84.70 °C; −120.46 °F; 188.45 K
Boiling point 154 to 158 °C; 309 to 316 °F; 427 to 431 K
Insoluble
Solubility Alcohol, ether
1.448 (20 °C, D)
Thermochemistry
219.7 J K−1 mol−1
452.92 J K−1 mol−1
−196.1–−192.9 kJ mol−1
−4026.2–−4023.0 kJ mol−1
Hazards
GHS labelling:
GHS02: Flammable GHS07: Exclamation mark
Warning
H226, H315, H319, H335
P261, P305+P351+P338
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
2
0
Flash point 57 °C (135 °F; 330 K)
Lethal dose or concentration (LD, LC):
1.226 g/kg (IP, mouse)
Related compounds
Related alkanes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

1-Bromohexane is organobromine compound with formula Br(CH2)5CH3. It is a colorless liquid.

Synthesis and reactions

Most 1-bromoalkanes are prepared by free-radical addition of hydrogen bromide to the 1-alkene. These conditions lead to anti-Markovnikov addition, giving the 1-bromo derivative.[2]

1-Bromohexane undergoes reactions expected of simple alkyl bromides. It can form Grignard reagents.[3] It reacts with potassium fluoride to give the corresponding fluorocarbons.[4]

See also

References

  1. ^ "1-bromohexane - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 26 March 2005. Identification. Retrieved 17 June 2012.
  2. ^ Dagani, M. J.; Barda, H. J.; Benya, T. J.; Sanders, D. C. "Bromine Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a04_405. ISBN 978-3527306732.
  3. ^ Garst, J., Ungvary, F., Batlaw, R., & Lawrence, K. (1991). Solvent attack in Grignard reagent formation from bromocyclopropane and 1-bromohexane in diethyl ether. Journal of American Chemical Society, 113, 5392-5397.
  4. ^ Vogel, A. I.; Leicester, J.; Macey, W. A. T. (1956). "n-Hexyl Fluoride". Organic Syntheses. 36: 40. doi:10.15227/orgsyn.036.0040.
Stub icon

This article about an organic halide is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=1-Bromohexane&oldid=1017947589"