Jump to content

Invader 36

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 07:59, 23 January 2021 (Task 18 (cosmetic): eval 5 templates: hyphenate params (5×);). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Invader 36
Development
DesignerC&C Design
LocationCanada
Year1965
Builder(s)Hinterhoeller Yachts, Belleville Marine Yard, C&C Yachts
NameInvader 36
Boat
Displacement10,550 lb (4,785 kg)
Draft5.00 ft (1.52 m)
Hull
TypeMonohull
ConstructionFiberglass
LOA35.75 ft (10.90 m)
LWL24.25 ft (7.39 m)
Beam9.16 ft (2.79 m)
Engine typeUniversal Atomic 4 gasoline engine
Hull appendages
Keel/board typelong keel
Ballast3,800 lb (1,724 kg)
Rudder(s)keel-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height37.58 ft (11.45 m)
J foretriangle base13.58 ft (4.14 m)
P mainsail luff32.67 ft (9.96 m)
E mainsail foot15.25 ft (4.65 m)
Sails
SailplanMasthead sloop
Mainsail area249.11 sq ft (23.143 m2)
Jib/genoa area255.17 sq ft (23.706 m2)
Total sail area504.28 sq ft (46.849 m2)

The Invader 36 is a Canadian sailboat, that was designed by C&C Design specifically for Hinterhoeller Yachts and first built in 1965.[1][2]

The Invader 36 design was developed into the Frigate 36 in 1968, by shortening the long keel into a stub long keel, adding a centreboard and increasing the sail area.[1]

Production

The Invader 36 design was built by Hinterhoeller Yachts in Canada, but the majority were constructed at Belleville Marine Yard, both of which became part of C&C Yachts. Production ran from 1965 to 1969, but it is now out of production.[1][3][4]

Design

The Invader 36 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a raked stem, a raised counter transom, a keel-mounted rudder controlled by a wheel and a fixed long keel. It displaces 10,575 lb (4,797 kg) and carries 3,800 lb (1,724 kg) of ballast.[1]

The boat has a draft of 5.00 ft (1.52 m) and was factory-fitted with a Universal Atomic 4 gasoline engine.[1]

The design has a hull speed of 6.6 kn (12.22 km/h).[5]

See also

Related development

Similar sailboats

References

  1. ^ a b c d e Browning, Randy (2018). "Invader 36 (C&C) sailboat specifications and details". sailboatdata.com. Retrieved 28 June 2018.
  2. ^ Browning, Randy (2018). "C&C Design". sailboatdata.com. Retrieved 28 June 2018.
  3. ^ Browning, Randy (2018). "Hinterhoeller Yachts Ltd". sailboatdata.com. Retrieved 28 June 2018.
  4. ^ Browning, Randy (2018). "C&C Yachts". sailboatdata.com. Retrieved 11 June 2018.
  5. ^ InterVisionSoft LLC (2018). "Sailboat Specifications for C&C Invader 36". Sailing Joy. Retrieved 28 June 2018.