This is an old revision of this page, as edited by Citation bot(talk | contribs) at 21:00, 3 February 2021(Alter: template type. Remove Template type redirect. | You can use this bot yourself. Report bugs here. | Suggested by AManWithNoPlan | All pages linked from cached copy of User:AManWithNoPlan/sandbox3 | via #UCB_webform_linked 66/496). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 21:00, 3 February 2021 by Citation bot(talk | contribs)(Alter: template type. Remove Template type redirect. | You can use this bot yourself. Report bugs here. | Suggested by AManWithNoPlan | All pages linked from cached copy of User:AManWithNoPlan/sandbox3 | via #UCB_webform_linked 66/496)
It had nothing in common with the QF 4.5 inch Howitzer or the QF 4.5 inch AA gun.
Development
By the end of the 1930s, the First World War-era (5-inch calibre) BL 60-pounder gun of 1905 had reached the end of its usable service life within the British Army. A successor was sought and work began on an all-new design that would result in the Ordnance BL 4.5" medium field gun, a long-range medium gun designed for counter-battery fire. The gun was in use throughout the Second World War and it equipped a number of medium regiments, including half the Canadian ones.[3] In service, the guns were fielded at the regiment level and were taken on by both British and Canadian artillery field groups during the war.
The 4.5inch field gun was a good weapon that could fire a 25 kg HE shell up to 11.6 miles with Charge 3. It matched German 10.5 cm and 150 mm howitzers in range and firepower.[citation needed]
For the sake of expediency, Mk I ordnance was designed to be mounted on the 60-pounder carriage. The Mk 1 gun was first issued in 1938 and equipped one or two regiments of the British Expeditionary Force. The 4.5 inch Mk 1 is sometimes mistaken for the 60-pounder.
The Mk II was on a new carriage that was also used with the BL 5.5 inch medium gun (which was being developed at the same time to replace the BL 6-inch 26 cwt howitzer). There were slight differences between the Mk 1 and Mk 2 equipment, but the maximum range was almost identical. Issues of the Mk 2 ordnance on the common carriage started in 1941.
Service
A British 4.5 inch gun firing in Tunisia, 1943AEC Matador towing a 4.5-inch gun over wooden causeway in North Africa
The Mk II gun served in North Africa, Italian campaign and North West Europe. It was withdrawn from field service in 1945, relegated to training purposes and finally declared obsolete in 1959 with the 5.5 inch gun replacing it. Both Mks were normally towed by the AEC Matador 4 × 4 medium artillery tractor. The Germans gave captured guns the designation 11.4 cm K 365(e).[2]
The US 4.5 inch gun M1 used the same shell design, Mk 1D in UK service with a 6/10 crh. This design was noted for its small amount of HE (3.9 lb (1.8 kg) in a 55 lb (25 kg) shell) but the larger fragments that resulted were suited to its counter-battery role. Apart from HE, the only other type of shell was flare used to indicate targets for air attack. It had propellant in charges 1, 2 and 3. 'Intense' rate of fire was two rounds per minute, 'normal' rate was one round; 'gunfire' rate was two to three rounds per minute.
Variants
Mark 1
BL 60-pounder gun mk II on mk IV carriage. Carriage on this gun is same as used in BL 4.5 inch mark I just a BL 4.5 inch gun in place of the BL 60 pounderNew 4.5 inch ordnance on 60 pounder carriage introduced in the 1930s used by the Royal Artillery in France and North Africa in the Second World War.
Mark II
Modified ordnance on carriage 4.5 inch and 5.5 inch in use in the Second World War from 1941 by British and Canadian artillery.
