Jump to content

Robert Riddles

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 03:40, 9 November 2022 (Add: date. | Use this bot. Report bugs. | Suggested by Abductive | Category:Locomotive builders and designers | #UCB_Category 58/187). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Robin Riddles
Born(1892-05-23)23 May 1892
Died18 June 1983(1983-06-18) (aged 91)
NationalityBritish
OccupationEngineer
Engineering career
DisciplineLocomotive Engineering
InstitutionsInstitution of Mechanical Engineers (member), Institution of Locomotive Engineers

Robert Arthur "Robin" Riddles, CBE, MIMechE, MinstLE (23 May 1892 – 18 June 1983) was a British locomotive engineer.[1]

Biography

LNWR and LMS

Riddles was born in 1892 and entered the Crewe Works of the London and North Western Railway as a premium apprentice in 1909, completing his apprenticeship in 1913. While attending the Mechanics Institute classes he took a course in electrical engineering, feeling there would be a future for electric traction.[2] During the 1914–18 Great War he served with the Royal Engineers mainly in France, during which time he was badly wounded.

He returned to the LNWR at Crewe, and, in 1920, became the "bricks and mortar assistant", with responsibility for the new erecting shop. When work on this was stopped, Riddles was placed in charge of a small production progress department and was sent to Horwich to study the methods used by the L&Y. From this, Riddles gained some backing and had significant influence in the re-organisation of Crewe, which took place between 1925 and 1927.[2] In 1923, the LNWR became part of the London, Midland and Scottish Railway, thus, on completion of the work at Crewe, Riddles was sent to the ex-Midland Railway works at Derby, by now part of the LMS, to initiate a similar arrangement. In this task, he had the active support of the then Derby works manager, H. G. Ivatt.

During the nine-day General Strike in May 1926, Riddles volunteered as a driver, taking trains from Crewe to Manchester and Carlisle.[2] The experience gained, made him almost unique among CMEs; Riddles maintained that the practical knowledge of driving a locomotive that he gained, was an invaluable aid to his design work.

In 1933, Riddles moved to Euston to become Locomotive Assistant to the new Chief Mechanical Engineer, Sir William Stanier, and in 1935 became Stanier's Principal Assistant. In 1937, Riddles moved to Glasgow as Mechanical & Electrical Engineer - Scotland, the first to combine both engineering disciplines in a single title. However, Riddles was disappointed that C. E. Fairburn was at this time appointed as Stanier's Deputy.

Ministry of Supply

In 1939, with the Second World War having just started, he moved to the Ministry of Supply, becoming Director of Transportation Equipment, and later designed the WD Austerity 2-8-0 and WD Austerity 2-10-0 locomotives.

Return to LMS

In 1943, he moved to the post of Chief Stores Superintendent at the LMS - it has been said that he was anxious to get back into the railway business. On the death of Charles Fairburn in 1944, he applied for the position of Chief Mechanical Engineer, but the job went to George Ivatt, with Riddles being promoted to vice-president of the LMS.

British Railways

Upon the creation of the Railway Executive in 1947, in preparation for the nationalisation of the railways in 1948, he was appointed Member of the Railway Executive for Mechanical and Electrical Engineering. He had two principal assistants, both of whom were also former LMS men: Roland C. Bond, Chief Officer (Locomotive Construction and Maintenance), and E. S. Cox, Executive Officer (Design). The duties of these three effectively covered the old post of Chief Mechanical Engineer; they subsequently oversaw the design of the British Railways (BR) standard classes.[3]

Retirement

Riddles retired in 1953, on the abolition of the Railway Executive, and became a director of Stothert & Pitt of Bath, Cranemakers.

Riddles was succeeded as Chief Mechanical Engineer of BR by Roland Bond.[4]

References

  1. ^ "Robert A. Riddles". The London & North Eastern Railway (LNER) Encyclopedia. Retrieved 26 October 2007.
  2. ^ a b c "Robert (Robin) Arthur Riddles". SteamIndex. 28 June 2007. Retrieved 30 June 2009.
  3. ^ Gilbert, P.T.; Chancellor, P.J. (1994). Taylor, R.K. (ed.). Volume One: Background to Standardisation and the Pacific Classes. A Detailed History of British Railways Standard Steam Locomotives. Lincoln: RCTS. p. 15. ISBN 0-901115-81-9.
  4. ^ "FEATURE: Robert Riddles, Britain's Last Steam Chief Mechanical Engineer". Heritage Railway. 10 August 2018. Retrieved 17 May 2019.

Further reading

  • Rogers, Colonel H.C.B. (1970). The Last Steam Locomotive Engineer: R.A.Riddles. London: George Allen & Unwin. ISBN 0-04-385053-7.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Robert_Riddles&oldid=1120845358"