Jump to content

Shin-Sendai Thermal Power Station

Coordinates: 38°16′36.4″N 141°2′21.5″E / 38.276778°N 141.039306°E / 38.276778; 141.039306
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 240d:1a:4b5:2800:c563:b1d8:aed6:9fb7 (talk) at 02:19, 24 December 2022 (External links). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Shin-Sendai Thermal Power Station
新仙台火力発電所
Shin-Sendai Thermal Power Station
Map
CountryJapan Miyagi Prefecture#Japan
LocationMiyagino-ku, Sendai, Miyagi, Japan
Coordinates38°16′36.4″N 141°2′21.5″E / 38.276778°N 141.039306°E / 38.276778; 141.039306
StatusOperational
Commission date1971
OwnerTohoku Electric
Thermal power station
Primary fuelLNG
Power generation
Units operational1
Units decommissioned2
Nameplate capacity1046 MW

Shin-Sendai Thermal Power Station (新仙台火力発電所, Shin-Sendai Karyoku Hatsudensho) is an LNG-fired thermal power station operated by Tohoku Electric in Miyagino-ku, Sendai, Miyagi Prefecture, Japan. The facility is located on the Pacific coast near the Port of Sendai.

History

The Shin-Sendai Thermal Power Station was built in 1959 to supply power to the Sendai metropolis and surrounding Miyagi Prefecture. Unit 1 started operation in August 1971, followed by Unit 2 in June 1973. In 2006, Tohoku Electric announced a plan to abolish both units and to build two new high-efficiency More Advanced combined cycle (MACC) power generation facilities to reduce carbon emissions and lower operating costs.

Operations were temporarily suspended due to damage caused by the Tōhoku earthquake and tsunami in March 2011. Unit 1 was already stopped for maintenance, but Unit 2 was forced to make an emergency shutdown when its turbine house was flooded by the tsunami. Unit 1 resumed full output on December 27, but a decision was reached not to repair Unit 2 and it was subsequently scrapped by the end of the year.

Along with the new power generation units, a new LNG receiving facility was constructed. This facility was purpose-built to accommodate the Q-Flex series of liquefied natural gas carriers from Qatar.

Unit 3-1 came on line in December 2015, followed by Unit 3–2 in July 2016. From July 18, 2017, the rated output of Unit 3 was upgraded from 980,000 kW to 1,046,000 kW due to operational experience and software modifications.

Plant details

Unit Fuel Type Capacity On line Status
1 Heavy Oil Steam turbine 350 MW 1971 Decommissioned 2015; Scrapped
2 Heavy Oil / Crude Oil / LNG Steam turbine 600 MW 1973 Decommissioned 2011; Scrapped
3-1 LNG MACC 523 MW 2015 operational
3-2 LNG MACC 523 MW 2016 operational

See also