Jump to content

Oneonta (sidewheeler)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by ClueBot NG (talk | contribs) at 10:15, 14 March 2023 (Reverting possible vandalism by 2600:1700:5250:2860:ACFC:B014:2648:E107 to version by Lyndaship. Report False Positive? Thanks, ClueBot NG. (4222421) (Bot)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Oneonta meeting portage train at Upper Cascades, Wash. Terr., 1867
History
NameOneonta
OwnerOregon Steam Navigation Company
RouteColumbia River and lower Willamette River to Portland, Oregon
BuilderSamuel Forman
Completed1863, Celilo, Oregon[1]
Out of service1877[1]
FateDismantled[1] or abandoned[2]
General characteristics
Tonnage497-tons
Length150 ft (46 m)
Installed powersteam
Propulsionsidewheels

The Oneonta was a sidewheel steamboat that operated on the Columbia River from 1863 to 1877.

Design

Oneonta was one of the rare examples of a Mississippi-style riverboat built on the Columbia River. Typical of the Mississippi-style were the two funnels forward of the pilot house, with sidewheels instead of sternwheels at the preferred design, and the pilot house itself being located near the middle of the boat.

Operation

Oneonta near upper Cascades, in 1867
1865 newspaper advertisement for Oneonta running on the middle Columbia

Oneonta ran on the stretch of the Columbia River between the Cascade Rapids eastward to The Dalles, where another longer stretch of whitewater. The rapids east of The Dalles were generally known as Celilo Falls. There were portages around both sets of rapids. Originally these just tracks, but they were gradually replace first railways, first drawn by mules and then by steam engines. Oregon Steam Navigation Company built Oneonta in an effort to control both the portages and the middle river route connecting them as the only feasible transport line to the gold rushes that were going on in Eastern Oregon and Idaho in the 1860s. When this business tampered off, in 1870, the president of O.S.N., John C. Ainsworth took Oneonta down through the Cascade Rapids at high water to run on the lower Columbia.[2]

Disposition

Oneonta was taken out of service in 1877 and served as barge until being abandoned in 1880.[2]

Notes

  1. ^ a b c Mills, Randall V., Sternwheelers up Columbia - A Century of Steamboating in the Oregon Country, at 199, University of Nebraska Press, Lincoln, NE (1977 reprint of 1947 edition) ISBN 0-8032-5874-7)
  2. ^ a b c Tucker, Kathy, "Steamboat Oneonta, Columbia River," Oregon History Project, Oregon Historical Society 2002 (accessed 2008-03-21)