Jump to content

Magnetic inequivalence

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 05:35, 2 July 2023 (Add: issue, pmid. | Use this bot. Report bugs. | Suggested by Abductive | Category:Nuclear magnetic resonance | #UCB_Category 77/111). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In the context of nuclear magnetic resonance (NMR), the term magnetic inequivalence refers to the distinction between magnetically active nuclear spins by their NMR signals, owing to a difference in either chemical shift (magnetic inequivalence by the chemical shift criterion) or spin-spin coupling (J-coupling) (magnetic inequivalence by the coupling criterion). Since chemically inequivalent spins (i.e. nuclei not related by symmetry) are expected to also be magnetically distinct (barring accidental overlap of signals), and since an observed difference in chemical shift makes their inequivalence clear, the term magnetic inequivalence most commonly refers solely to the latter type, i.e. to situations of chemically equivalent spins differing in their coupling relationships.

This situation can arise in a number of ways and can give rise to complexities in the corresponding NMR signals (beyond what a first-order analysis would handle) that range from the unnoticeable to the dramatic.

Occurrence

Two (or more) chemically equivalent (symmetry-related) spins will have the same chemical shift, but those that have a different coupling relationship to the same coupling partner are magnetically inequivalent by the coupling criterion. This occurs in molecules bearing two (or more) chemically distinct groups of symmetry-related nuclei, with just one element of symmetry relating them.[1] Most commonly, two chemically inequivalent pairs of hydrogen nuclei (protons) are involved, although other magnetically active nuclei will also show this phenomenon, and the spin system is often labelled an AA′BB′ system. Additional coupling partners may also be present, but it is the two A/A′ and B/B′ signals (at different chemical shifts) that are said to show magnetic inequivalence between the symmetry-related A and A′ (or B and B′) pairs at the same chemical shift. If the chemical shift difference (νA−νB) is large compared to the largest coupling constant, the spin system may be designated AA′XX′.

Paired H-C-C-H fragments

Magnetic inequivalence may occur with two symmetry-related HA-C-C-HB fragments (where the different subscripts indicate chemical inequivalence) that may or may not be contiguous. In order to distinguish the resulting coupling relationships, the symmetry-related pair would be labelled HA′-C-C-HB′.

ortho-Disubstituted benzenes

aromatic region (CDCl3, 300 MHz); starred peaks are from impurities

H-3 and H-6 in any 1,2-homodisubstituted benzene are related by a mirror plane of symmetry bisecting the 1,2 and 4,5 C-C bonds. They are therefore chemically equivalent (and magnetically equivalent by the chemical shift criterion) but, because they have different spatial and connectivity relations to H-4 (with 3-bond vs. 4-bond couplings of different strengths), they are magnetically inequivalent by the coupling criterion. The same is true with respect to their coupling relationships with H-5. Similarly, H-4 and H-5 are chemically equivalent but magnetically inequivalent owing to their different coupling relationships with H-3 (or H-6).

A classic example showing highly complex splitting is that of 1,2-dichlorobenzene. The two signals are nearly mirror-symmetrical. In 1,2-diaminobenzene (ortho-phenylenediamine), the two signals have nearly the same chemical shift, so that the resultant signals form a complex multiplet.

para-Disubstituted benzenes

H-2/6 signal close-up (CDCl3, 300 MHz); the H-3/5 signal is identical

H-2 and H-6 in any 1,4-heterodisubstituted benzene are related by a mirror plane of symmetry passing through C-1 and C-4. They are therefore chemically equivalent (and magnetically equivalent by the chemical shift criterion) but, because they have different spatial and connectivity relations to H-3 (with 3-bond vs. 5-bond coupling constants of different strengths), they are magnetically inequivalent by the coupling criterion. The same is true with respect to their coupling relationships with H-5. Similarly, H-3 and H-5 are chemically equivalent but magnetically inequivalent owing to their different coupling relationships with H-2 (or H-6).

An example is provided by 4-nitroaniline. Although each signal retains the gross doublet shape predicted by first-order analysis, a close-up view of each reveals additional peaks.

Other aromatics

Any 4-substituted pyridine, pyridine itself, 1-substituted pyrazinium ion, diazine, 1-substituted or unsubstituted pyrrole and related aromatic heterocyclics (phospholes, furan, thiophene, etc.) as well as unsubstituted or 1-substituted cyclopentadienes and 1-substituted cyclopentadienides all have the same symmetry framework as para-disubstituted or ortho-homodisubstituted benzenes, and will present chemically equivalent but magnetically inequivalent pairs of protons. In heterocycles and in five-membered rings in general, however, 3J values can be significantly smaller than in benzenes and the manifestation of magnetic inequivalence may be subtle.

The rarer seven-membered and higher ring systems may also show the same symmetry property, as can linked and fused aromatic ring systems such as biphenyls, naphthalenes and isoindoles. Similarly, 1-H benzimidazoles have the appropriate symmetry if N1-deprotonated or N3-protonated, or as a result of rapid tautomerization of the neutral form (for instance, in DMSO-d6) where the signals greatly resemble those of 1,2-dichlorobenzene.

Non-aromatic systems

The occurrence of symmetry-related pairs of HA-C-C-HB fragments is not limited to aromatic systems. For instance, magnetic inequivalence is found in 1,4-homodisubstituted butadienes.[2] It might be expected in a molecule such as a symmetrical 2,3,4,5-tetrasubstituted pyrrolidine, but less rigid and less flat sp3 frameworks tend to show very weak long-range couplings (through 4 or more bonds) so as to not manifest much sign of magnetic inequivalence. Reich gives several additional examples of magnetic inequivalence in non-aromatic H-C-C-H pairs.[3]

H2C-CH2 fragments

CH2 region (CDCl3, 300 MHz); starred peaks are from impurities

Magnetic inequivalence may occur with H2C-CH2 fragments that are subdivided into two groups of two in either geminal relationships via a mirror plane along the C-C bond, i.e. HAHA′C-CHBHB′, or in vicinal relationships via a mirror plane bisecting the C-C bond, i.e. in HAHBC-CHA′HB′,[4] or via a rotational axis of symmetry (a C2-axis), i.e. HAHBC-CHB′HA′. The coupling constants then differ because of geometry (cis vs. trans) or connectivity (2-bond vs. 3-bond) and the level of complexity will depend on the differences. Conformational dynamics may reduce or even obliterate the difference between cis and trans couplings, if fast compared to the NMR timescale. There may also be additional couplings to other nuclei.

The ethylene fragment in 2-substituted dioxolanes can thus show a high level of complexity if the substituent is large. Symmetrical norbornanes and similarly rigid compounds (e.g. 7-oxabicyclo[2.2.1]heptane) also show complex signals for the ethylene fragments, made more complicated by additional splitting by the bridgehead protons. Reich gives several additional examples of magnetic inequivalence in acyclic and cyclic systems containing H2C-CH2 fragments.[3]

With other nuclei

Any pair of symmetry-related X-C-C-Y fragments (where X and Y are different magnetically active nuclei) as well as XYC-CXY (cis or trans) and X2C-CY2 fragments may show magnetic inequivalence when the heteronuclear coupling constants (2JXY or 3JXY) are non-negligible. In principle, the magnetically active nuclei may also be disposed on non-carbon atoms.

A classic example is the 1H-NMR spectrum of 1,1-difluoroethylene.[5] The single 1H-NMR signal is made complex by the 2JH-H and two different 3JH-F splittings. The 19F-NMR spectrum will look identical. The other two difluoroethylene isomers give similarly complex spectra.[6]

Appearance

Whereas a four-spin AA′BB′ (or AA′XX′) system may have the requisite symmetry and coupling properties, its signals may show more or less complexity and, as with other coupling phenomena, the appearance of a signal from magnetically inequivalent nuclei will also depend on the instrumental field strength. A large number of such systems show less complexity, with fewer lines than is possible, particularly when the instrumental resolution is low, whence nearby peaks appear to coalesce, when JAB ≈ JA′B′, when JAB ≈ −JAB′, when JAA′ ≈ JBB′ or when JBB′ ≈ 0. The apparent complexity is also diminished in AA′XX′ systems when νA−νX >> JAX.[3] This kind of simplication is enhanced as the instrumental magnetic field is increased, since the field-independent differences between coupling constants or between a coupling constant and zero appear proportionately smaller on the δ (ppm) scale, and since the field-dependent quantity (νA−νX)/JAX is magnified.

In molecules of uncertain or otherwise unproven structure, the definitive appearance of complexity in a pair of signals, beyond what can be explained by first-order analysis of HC-CH pairs or H2C-CH2 fragments, can be taken to signify the presence of magnetic inequivalence and, therefore, of an element of symmetry aggregating them. Thus, the appearance of such complexity in the aromatic region of the 1H-NMR spectrum of the bis-(acetylacetonato)ruthenium complex of o-benzoquinonediimine served to prove its C2-symmetrical nature.[7]

Analysis

Manual analysis of an AA′BB′ or AA′XX′ system is possible, if a sufficient number of peaks are detected.[3][8] The A/A′ and B/B′ chemical shifts and the several coupling constants between each spin can be accurately obtained by quantum-mechanical simulation[9] of the spin transition probabilities, given a set of guessed chemical shift and coupling constant values, and subsequent refinement of those values by iterative spectral fitting. Several software packages are available for this purpose, a sampling of which is (in no particular order):

Notes and references

  1. ^ If there were no symmetry relation among them, the nuclei would all be chemically inequivalent and therefore automatically magnetically inequivalent by the chemical shift criterion, showing as many signals as there are nuclei and with no additional complexity to the signal splitting. If there is more than one element of symmetry among them, the nuclei would all be chemically equivalent and therefore automatically magnetically equivalent by both the chemical shift and coupling criteria. A molecule may, of course, possess more than one set of magnetically inequivalent nuclei, related or not by additional symmetry elements that do not affect each.
  2. ^ McCasland, G. E.; Furuta, Stanley; Durham, Lois J. (1968). "Alicyclic carbohydrates. XXXII. Synthesis of pseudo-.beta.-DL-gulopyranose from a diacetoxy butadiene. Proton magnetic resonance studies". J. Org. Chem. 33 (7): 2835–41. doi:10.1021/jo01271a049. PMID 5742848.
  3. ^ a b c d Reich, Hans H. "5.14 A2X2 and AA'XX' Spectra". Retrieved 12 December 2012.
  4. ^ Note that HAHBC-CHA′HB′ presents a mirror-related pair of diastereotopic hydrogens. Indeed, molecules with diastereotopic nuclei frequently show magnetic inequivalence.
  5. ^ Flynn, George W.; Baldeschwieler, John D. (1963). "NMR Spectrum of 1,1‐Difluoroethylene in the Gas Phase". J. Chem. Phys. 38 (1): 226–31. Bibcode:1963JChPh..38..226F. doi:10.1063/1.1733466.
  6. ^ Ihrig, Arthur M.; Smith, Stanford L. (1972). "Solvent and temperature dependence of hydrogen-hydrogen, hydrogen-fluorine, and fluorine-fluorine coupling constants in difluoroethylenes". J. Am. Chem. Soc. 94 (1): 34–41. doi:10.1021/ja00756a007.
  7. ^ Kalinina, Daria; Dares, Christopher; Kaluarachchi, Harini; Potvin, Pierre G.; Lever, A. B. P. (2008). "Spectroscopic, electrochemical, and computational aspects of the charge distribution in Ru(acac)2(R-o-benzoquinonediimine) complexes". Inorg. Chem. 47 (21): 10110–26. doi:10.1021/ic8014496. PMID 18844345.
  8. ^ Becker, E. D. (1999). High Resolution NMR. Theory and Chemical Applications. 3rd Ed. Academic Press. ISBN 978-0120846627.
  9. ^ Note that NMR simulation is a term often erroneously used for NMR prediction, which proceeds from structure to predicted spectrum using databases of typical chemical shifts and coupling constants.
  10. ^ Veshtort, M.; Griffin, R. G. (2006). "SPINEVOLUTION: A powerful tool for the simulation of solid and liquid state NMR experiments". J. Magn. Reson. 178 (2): 248–82. Bibcode:2006JMagR.178..248V. doi:10.1016/j.jmr.2005.07.018.
  11. ^ Castillo, Andrés M.; Patiny, Luc; Wist, Julien (2011). "Fast and Accurate Algorithm for the Simulation of NMR spectra of Large Spin Systems". J. Magn. Reson. 209 (2): 123–30. Bibcode:2011JMagR.209..123C. doi:10.1016/j.jmr.2010.12.008.
  12. ^ Reich, Hans J. (1996). "WINDNMR". J. Chem. Educ. Software. 3D: 2.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Magnetic_inequivalence&oldid=1162972580"