Jump to content

4.7-inch gun M1906

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Trappist the monk (talk | contribs) at 19:26, 15 November 2023 (→History: cite repair;). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

4.7-inch gun M1906
TypeField gun
Place of originUnited States
Service history
In service1911-1932
Used byUnited States Army
WarsWorld War I
Production history
DesignerUnited States Army Ordnance Department
Designed1906
Manufacturer
Produced1907-1919
No. built209 guns, 470 carriages
VariantsM1906MI
Specifications
Mass7,393 lb (3,353 kg)
Barrel length
  • Bore: 129.22 inches (3.282 m) (27.5 calibers)
  • Total: 134.92 inches (3.427 m)
Shellfixed, 60 lb (27 kg) or 45 lb (20 kg)
Calibre4.7 in (120 mm)
Breechinterrupted screw
Recoilhydro-spring
Carriagebox trail
Elevation-5° to +15°
Traverse8°
Muzzle velocity1,700 ft/s (520 m/s)
Maximum firing range7,270 yd (6,650 m) (8,700 yd (8,000 m) with 45-lb shell)
Feed systemhand
Barrel construction
Breech mechanism
4.7-inch gun ammunition

The 4.7-inch gun M1906 (initially the M1904) was designed and issued by the United States Army Ordnance Department beginning in 1906, with the first units receiving the weapon in 1911.[1] It was of the field gun type. It was one of very few pre-war US artillery designs selected for wartime production in World War I, although (as with most of these projects) few of these weapons were delivered to France and used in action.[1] A combination of a limited pre-war munitions industry, the short (19-month) US participation in the war, technical problems with large-scale production, and the ready availability of munitions overseas led to this.

History

The design was orthodox for its time with a box trail and hydro-spring recoil system. By the time of the American entry into World War I 60 had been produced and issued to the Army.[2] Once the US entered World War I the US Army soon decided to adopt French and British artillery systems, and it was proposed to rechamber the 4.7-inch gun to fire French 120 mm ammunition. However, the presumed effect on production was too great, and this proposal was abandoned.[1] Another source (Hogg) states that changing over to French ammunition (of which France had only limited production in this caliber) snarled production badly in late 1918.[3] With the war over in November of that year, 149 guns and 320 carriages were produced between early 1917 and the Armistice, after which gun production apparently ceased but carriage production continued.[2][3] By the time production probably ceased on 17 April 1919, of 960 guns and 1,148 carriages ordered from 1906 through early 1917, only about 209 guns and 470 carriages were completed, according to the official history of US World War I war production, America's Munitions 1917–1918.[2] Sixty-four of these weapons (48 from pre-war stocks)[2] were shipped to France to equip three regiments, of which two (the 302nd and 328th Field Artillery) saw action with 48 guns total.[1] The official history does not mention switching the 4.7-inch gun to French ammunition, but does note that 994,852 4.7-inch shells were produced by the US through 1 November 1918; many of these may have been for British consumption.[4] The majority of the weapons were probably used for training in the United States, as shipments from the US to Europe were primarily men and ammunition. Regardless of what type of ammunition it used, the weapon remained in US service, though in reserve storage, until 1932.[1]

Williford states that total orders through early 1917 were 226 at Watervliet Arsenal. In early 1917 additional orders were placed at Watervliet (240 guns), Northwest Ordnance (500 guns), Walter Scott Co. (250 carriages), Studebaker (500 carriages), and Rock Island Arsenal (198 carriages).[1]

The 24 weapons emplaced on fixed pedestal mounts for land defense in the Panama Canal Zone from 1918 to 1926 were the 4.7-inch howitzer M1913, not an M1906 weapon as some sources state.[5][6]

Ammunition

Ammunition included a base-fuzed common steel shell containing 3.36 pounds (1.52 kg) of TNT, and a shrapnel shell containing 711 230-grain (15 g) balls with a 31-second combination fuze and optional tracer.

Surviving examples

See also

Weapons of comparable role, performance and era

References

  1. ^ a b c d e f Williford, pages 70-71
  2. ^ a b c d Crowell, pages 71-73
  3. ^ a b Hogg WWI, pages 51-53
  4. ^ Crowell, page 121
  5. ^ Handbook of the 4.7-inch Howitzer Materiel M1913 on Pedestal Mount M1915
  6. ^ Berhow, Mark A., ed. (2015). American Seacoast Defenses, A Reference Guide (Third ed.). CDSG Press. p. 78. ISBN 978-0-9748167-3-9.
  7. ^ M1906 4.7-inch gun, Fort Sill, OK at waymarking.com
  8. ^ M1906 4.7-inch guns in Wisconsin at warmemorials.us
  9. ^ "Fort Howard's Cannons Get Makeover", Baltimore Sun, December 26, 2015
  10. ^ 519th Port Battalion (US Army) memorial website
Wikimedia Commons has media related to 4.7 inch Gun Model 1906.
Retrieved from "https://en.wikipedia.org/w/index.php?title=4.7-inch_gun_M1906&oldid=1185283917"