Jump to content

Star coupler

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Thumperward (talk | contribs) at 09:24, 29 August 2016 (tidy, stubify). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A star coupler is a device that takes in an input signal and splits it into several output signals.

In fiber optics, and especially in telecommunications, a star coupler is a passive optical device, used in network applications. An optical signal introduced into any input port is distributed to all output ports. Because of the way a passive star coupler is constructed, the number of ports is usually a power of 2; i.e., two input ports and two output ports (a "two-port" coupler, customarily called a directional coupler, or splitter ); four input ports and four output ports (a "four-port" coupler); eight input ports and eight output ports (an "eight-port" coupler), etc.

Digital Equipment Corporation (now part of Hewlett-Packard) of Maynard, Massachusetts sold a star coupler which interconnected links to computers via coaxial cable rather than optical fibres, but the function was essentially the same. The signal that was distributed was 70 Mb/s computer interconnect (CI) data and the star coupler provided two redundant paths of either 8 or 16 ports each. Digital's star coupler was developed for use with the VAX- and later Alpha-based computers running Digital's VMS operating system, to provide a passive, highly reliable interconnect for Digital's cluster technology.

References

  • Public Domain This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22.
  • FAA Glossary of Optical Communications Terms