Jump to content

Taylor Inlet

Coordinates: 34°59′38″S 118°03′33″E / 34.99389°S 118.05917°E / -34.99389; 118.05917
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Mitch Ames (talk | contribs) at 13:47, 24 October 2017 (Remove space before ref per WP:REFPUNCT using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Taylor Inlet is an inlet located in the Great Southern region of Western Australia. The inlet is located on the coast near Nanarup Beach and is approximately 23 kilometres (14 mi) East of Albany and is contained within the Taylor Inlet nature reserve.[1][2]

The inlet is a wave dominated estuary with a degraded catchment, that is a result of substantial clearing and a saline run-off. It covers a total area of 1.2 square kilometres (297 acres)[3] and the catchment covers a total area of about 10 square kilometres (4 sq mi)

The inlet is separated from the Southern Ocean by a sand bar and typically open once or twice a year for a few weeks at a time usually between September and January. It kidney shaped and lies almost parallel to the shoreline. The channel is approximately 300 metres (984 ft) in length and 100 metres (328 ft) wide.

The vegetation fringing the inlet include Melaleuca cuticularis, Juncus kraussii, Samolus repens, Gahnia trifida and Baumea juncea. Other plants found in the surrounding dunes include Sand spinifex, Sword sedge and berry saltbush, pigface and peppermint trees.

References

  1. ^ "Rainbow Coast Western Australia". 2004. Retrieved 20 October 2010.
  2. ^ "Nanarup Beach Management Plan" (PDF). 2004. Retrieved 20 October 2010.
  3. ^ "Estuary Assessment Framework for Non-pristine estuaries - Estuary 895 - Taylor Inlet". 2004. Retrieved 20 October 2010.

34°59′38″S 118°03′33″E / 34.99389°S 118.05917°E / -34.99389; 118.05917