Jump to content

BBÖ 114

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Andy Dingley (talk | contribs) at 22:47, 2 August 2018 (added Category:1′D2′ h3 locomotives using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

BBÖ 114DRB 12.1
Type and origin
Build date1929
Total produced1
Specifications
Configuration:
 • Whyte2-8-4
Gauge1,435 mm (4 ft 8+12 in)
Leading dia.1,034 mm
Driver dia.1,940 mm
Trailing dia.1,034 mm
Wheelbase:
 • Overall12,635 mm
 • incl. tender19,403 mm
Length:
 • Over buffers22.613 m
Height4.650 m
Adhesive weight70.2 t
Service weight117.2 t
Tender type84
Fuel capacity8.0 t coal
Water cap.29.50 m3
Firebox:
 • Grate area4.72 m2
Boiler:
 • Small tubes151
 • Large tubes38
Boiler pressure15 bar
Heating surface:
 • Firebox18.70 m2
 • Total surface262.00 m2
Superheater:
 • Heating area91.00 m2
Cylinder size530 mm
Piston stroke720 mm
Performance figures
Maximum speed100 km/h
Career
NumbersBBÖ 114.01DRB 12 101
Retired1953

The Class BBÖ 114.01 locomotive was an Austrian express train steam locomotive.

At the same time as plans were developed for the two-cylinder Class 214, design emerged in the Wiener Neustädter Lokomotivfabrik for a three-cylinder engine. In order to be able to compare the two designs it was decided to build a prototype of each one. Number 114.01 was built in the Wiener Neustädter Lokomotivfabrik and delivered in 1929.

In general the advantage of three-cylinder locomotives lies in their more powerful torque and a better balance of the rotating masses, which leads to lower wear and tear. The disadvantage is a higher fuel consumption due to the three steam engines. This was true in the case of 114.01 which in comparison with locomotive 214.01 had a 9% higher consumption of coal. Difficult access to the inside gear and the associated poor maintainability of locomotive 114.01, combined with the fact that 214.01 did better in the trial runs, led to the 214s going into series production. Number 114.01 remained in service with the BBÖ as a one-off. A visible difference from the 214s is the visible parts of the unusual Marshall valve gear with its rotating camshaft.

In 1938 the Deutsche Reichsbahn redesignated this locomotive as number 12 101.

Number 114.01 was employed on the locomotive schedules (Umlaufplan) of the 214s and, amongst other things, was allowed to head the first Arlberg Orient Express after the Second World War. In 1948 it was converted to oil-firing due to the shortage of coal. On 6 August 1949 the middle cylinder broke. Due to the irreparable damage the locomotive was sidelined and dismantled in 1953.

See also

References

  • Schröpfer, Heribert (1989). Triebfahrzeuge österreichischer Eisenbahnen – Dampflokomotiven BBÖ und ÖBB. Düsseldorf: alba. ISBN 3-87094-110-3. {{cite book}}: Invalid |ref=harv (help)