Gravitic density meter
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
A gravitic density meter is a type of density meter used in multiple industries to measure the density of a slurry flowing through a pipe line. It consists of a flexible rubber hose that deflects when weight is flowing through the hose. A displacement measurement device, usually a high precision laser or load cell, is used to measure how much change has occurred in the system. By calculating the change of deflection of the hose, a gravitic density meter can be used to find the real time, continuous density.
Gravitic density meters do not measure the specific gravity directly. The specific gravity is calculated after the density has been measured.
Components
A gravitic density meter has multiple components.
A resistance temperature detector (RTD) is used to acquire temperature readings. These readings are used to compensate for temperature. A [[pressure
sensor|pressure transducer]] is used to account for changes in pressure. Pressure affects the rigidity of the flexible hose. Changes in rigidity affect the way that the flexible hose deflects. The flexible hose is used to measure deflection. Larger weights cause more deflection in the flexible rubber hose. The flexible hose must be repeatable, accurate, and precise. Without these three attributes, an accurate measurement cannot be obtained.
Insulation is used to protect the flexible cartridge as well as isolate the flexible cartridge from the effects of ambient temperature. Large differentials between the ambient temperature and media temperature cause the flexible cartridge to behave differently than what is normal. The displacement measurement device needs to have a fast response time. A fast response results in more data which can be used to compensate for vibration. Gravitic density meters measure the entire volume inside the flexible cartridge. This makes the sample size very large. This large sample size leads to measurements that reflect the entire sample, because the entire sample is going to go through the hose.
Industries
Gravitic density meters have many uses in many different industries. Mining, dredging, wastewater, paper, and oil and gas all make use of gravitic density meters. All these industries need to measure the amount of solids moving through its respective process.
Mining industries use gravitic density meters to measure the amount of ore being transported.
Dredging industries use gravitic density meters to measure the amount of debris being moved and carried by the dredge.
Wastewater industries use gravitic density meters to measure the amount of sewage that needs to be treated.
Paper production uses gravitic density meters to measure the amount of pulp currently being used in the process.
Oil and gas use gravitic density meters to measure the amount of oil and gas in the system. This case exemplifies the versatility of gravitic density meters because oil and gas are lighter than water.