Jump to content

p-Anisidine

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 18:11, 22 March 2020 (Add: isbn, chapter. Removed parameters. Some additions/deletions were actually parameter name changes. | You can use this bot yourself. Report bugs here. | Activated by User:Neko-chan | Category:Hazardous air pollutants | via #UCB_Category). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

p-Anisidine
Skeletal formula of p-anisidine
Ball-and-stick model of p-anisidine
Names
Preferred IUPAC name
4-Methoxyaniline[1]
Other names
para-Anisidine; 4-Aminoanisole; p-Aminoanisole
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.002.959 Edit this at Wikidata
EC Number
  • 203-254-2
KEGG
RTECS number
  • BZ5450000
UNII
UN number 2431
  • InChI=1S/C7H9NO/c1-9-7-4-2-6(8)3-5-7/h2-5H,8H2,1H3 checkY
    Key: BHAAPTBBJKJZER-UHFFFAOYSA-N checkY
  • InChI=1/C7H9NO/c1-9-7-4-2-6(8)3-5-7/h2-5H,8H2,1H3
  • COc1ccc(cc1)N
Properties[4]
C7H9NO
Molar mass 123.155 g·mol−1
Appearance Light reddish brown solid[2]
Odor Fishy[2]
Density 1.071 (at 57 °C)
Melting point 56 to 59 °C (133 to 138 °F; 329 to 332 K)
Boiling point 243 °C (469 °F; 516 K)
Sparingly soluble[2]
Solubility in other solvents Soluble in ethanol, diethyl ether, acetone, benzene
Vapor pressure 0.006 mmHg (25 °C)[3]
-80.56·10−6 cm3/mol
1.5559
Hazards
GHS labelling:
GHS06: ToxicGHS08: Health hazardGHS09: Environmental hazard
Warning
H300, H310, H330, H350, H373, H400
P201, P202, P260, P262, P264, P270, P271, P273, P280, P281, P284, P301+P310, P302+P350, P304+P340, P308+P313, P310, P314, P320, P321, P322, P330, P361, P363, P391, P403+P233, P405, P501
Flash point 122 °C (252 °F; 395 K)
515 °C (959 °F; 788 K)
Lethal dose or concentration (LD, LC):
2900 mg/kg (rabbit, oral)
1300 mg/kg (mouse, oral)
1400 mg/kg (rat, oral)[5]
1000 mg/kg (mouse, oral)[5]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 0.5 mg/m3 [skin][3]
REL (Recommended)
TWA 0.5 mg/m3 [skin][3]
IDLH (Immediate danger)
50 mg/m3[3]
Related compounds
Related compounds
o-Anisidine
m-Anisidine
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

p-Anisidine (para-anisidine) is an organic compound with the formula CH3OC6H4NH2. A white solid, commercial samples can appear grey-brown owing to air oxidation. It is one of three isomers of anisidine, methoxy-containing anilines. It is prepared by reduction of 4-nitroanisole.[6]

Anisidine value

p-Anisidine condenses readily with aldehydes and ketones to form Schiff bases, which absorb at 350 nm. This colorimetric reaction is used to test for the presence of oxidation products in fats and oils, an official method for detecting them by the American Oil Chemists' Society.[7] It is particularly good at detecting unsaturated aldehydes, which are the ones that are most likely to generate unacceptable flavors, making it particularly useful in food quality testing.[8][9]

Safety

p-Anisidine is a relatively toxic compound with a permissible exposure limit of 0.5 mg/m3.[2]

References

  1. ^ Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 669. doi:10.1039/9781849733069-00648. ISBN 978-0-85404-182-4. The names 'toluidine', 'anisidine', and 'phenetidine' for which o-, m-, and p- have been used to distinguish isomers, and 'xylidine' for which numerical locants, such as 2,3-, have been used, are no longer recommended, nor are the corresponding prefixes 'toluidine', 'anisidino', 'phenetidine', and 'xylidino'.
  2. ^ a b c d "Occupational Safety and Health Guideline for Anisidine (o-, p-isomers)" (PDF).
  3. ^ a b c d NIOSH Pocket Guide to Chemical Hazards. "#0035". National Institute for Occupational Safety and Health (NIOSH).
  4. ^ Weast, Robert C., ed. (1981). CRC Handbook of Chemistry and Physics (62nd ed.). Boca Raton, FL: CRC Press. p. C-98. ISBN 0-8493-0462-8.
  5. ^ a b "p-Anisidine". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  6. ^ Mitchell, Stephen C.; Waring, Rosemary H. (2000). "Aminophenols". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a02_099. ISBN 3527306730.
  7. ^ "AOCS Official Method Cd 18-90". American Oil Chemists' Society. Retrieved 26 February 2013.
  8. ^ Steele, Robert (2004). Understanding and Measuring the Shelf-Life of Food. Woodhead Publishing in Food Science and Technology Series. Woodhead Publishing. p. 136. ISBN 1855737329.
  9. ^ A.J. Dijkstra (2016). "Vegetable Oils: Composition and Analysis". Encyclopedia of Food and Health. pp. 357–364. doi:10.1016/B978-0-12-384947-2.00708-X. ISBN 9780123849533.