Jump to content

John Day Dam

Coordinates: 45°42′59″N 120°41′40″W / 45.71639°N 120.69444°W / 45.71639; -120.69444
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by AnomieBOT (talk | contribs) at 09:38, 30 April 2020 (Dating maintenance tags: {{Unreferenced section}}). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

John Day Dam
John Day Dam
LocationSherman County, Oregon / Klickitat County, Washington
United States
Coordinates45°42′59″N 120°41′40″W / 45.71639°N 120.69444°W / 45.71639; -120.69444
Construction began1968
Opening date1971
Construction costUS$511 million
Dam and spillways
Type of damConcrete gravity, run-of-the-river
ImpoundsColumbia River
Height56 m (184 ft)
Length2,327 m (7,635 ft)
Spillway typeService, gate-controlled
Reservoir
CreatesLake Umatilla
Total capacity2,530,000 acre⋅ft (3.12×109 m3)
Power Station
Operator(s)U.S. Army Corps of Engineers
TypeRun-of-the-river
Turbines16 × 135 MW
Installed capacity2,160 MW
Annual generation8,418 GWh (2009)[1]

The John Day Dam is a concrete gravity run-of-the-river dam spanning the Columbia River in the northwestern United States.[2] The dam features a navigation lock plus fish ladders on both sides. The John Day Lock has the highest lift (110 feet) of any U.S. lock.[3] The reservoir impounded by the dam is Lake Umatilla,[4] and it runs 76.4 miles (123 kilometers) up the river channel to the foot of the McNary Dam. John Day Dam is part of the Columbia River Basin system of dams.

Location

John Day Dam is located 28 miles (45 km) east of the city of The Dalles, Oregon, and just below the mouth of the John Day River. The closest town on the Washington side is Goldendale, 20 miles (32 km) north. The closest town on the Oregon side is Rufus, Oregon. Its crest elevation is approximately 570 feet (170 m) above sea level. It joins Sherman County, Oregon with Klickitat County, Washington, 216 miles (348 kilometers) upriver from the mouth of the Columbia near Astoria, Oregon.

History

Construction of the dam began in 1958 and was completed in 1971,[5] making it the newest dam on the lower Columbia, at a total cost of US$511 million. The pool was filled in 1968 and a dedication ceremony was held on September 28th, 1968. [6]. John Day Dam was built and is operated by the U.S. Army Corps of Engineers. The condemnation of land upstream of the dam resulted led to the Supreme Court case United States v. Rands,[7] a well-known case regarding the constitutional doctrine of navigable servitude. The dam's power generation capacity is 2,480,000 kW (overload capacity). The dam underwent a major repair to the upper lock gate in 2010, as documented in the National Geographic Channel program "World's Toughest Fixes".[8]

Specifications

Depth of John Day Dam pool is illustrated by this 1967 photo showing the new UPRR bridge, with old bridges at sites to be submerged below.
  • Altitude: 266 feet (81 m) above sea level
  • Height: 183 feet (56 m)
  • Length: 7,365 feet (2,327 m)
  • Navigation lock:
    • Single-lift
    • 86 feet (26 m) wide
    • 675 feet (206 m) long
  • Powerhouse
    • Sixteen 135,000 kW units
    • Total capacity: 2,160 MW
    • Overload capacity: 2,485 MW
  • Spillway
    • Gates: 20
    • Length: 1,228 feet (374 m)

See also

Sources

  • "John Day Dam (Oregon - 164 ft. elev.)". Geographic Names Information System. United States Geological Survey. Retrieved 2006-05-10.
  • "John Day Dam (Washington - 269 ft. elev.)". Geographic Names Information System. United States Geological Survey. Retrieved 2006-05-10.

References

  • John Day Dam US Army Corps Engineers [1] U.S. Army Corps of Engineers