Jump to content

Ford GAA engine

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ira Leviton (talk | contribs) at 20:19, 21 June 2020 (Fixed a typo found with Wikipedia:Typo_Team/moss.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ford GAA
Overview
ManufacturerFord Motor Company
Production1940 - 1950
Layout
Configuration60° V8
Displacement1,100 cu in (18 L)
Cylinder bore5.4 in (137 mm)
Piston stroke6.0 in (152 mm)
ValvetrainDOHC
Compression ratio7.5:1
Combustion
Fuel systemNaturally aspirated with Stromberg NA-Y5-G carburetors[1]
Fuel typeGasoline
Output
Power output500 hp (373 kW) @ 2,600 rpm

The Ford GAA engine is an American all-aluminum 32-valve DOHC 60-degree V8 engine engineered and produced by the Ford Motor Company just before, and during, World War II. It features twin Stromberg NA-Y5-G carburetors,[2] dual magnetos and twin spark plugs making up a full dual ignition system,[2] and crossflow induction.[3] It displaces 1,100 cu in (18 L) and puts out well over 1,000 pound-feet (1,400 N⋅m) of torque from idle to 2,200 rpm. The factory-rated output was 500 hp (370 kW) at 2,600 rpm.

The GAA powered several models and derivatives of the M4A3 Sherman medium tank.

Development

Immediately preceding World War II, Ford developed an aircraft engine similar to that of the American Allison V-12 V-1710 engines of that era. It was a 60 degree V-12 of 1,650 cubic inch displacement with a matching set of cylinder bore/piston stroke figures to the Rolls-Royce Merlin aviation engine, using an aluminum block and head; dual overhead camshafts, and four valves per cylinder. The intention of this design was to help Ford break into the anticipated large market for fighter engines. This engine was built to typical aircraft standards: it was light, high performance, and highly reliable. Everything was safety wired or staked with close attention to detail on every part. Available information suggests this design performed well.

However, it never went into production as an aircraft engine due to the United States Navy's decision to only use radial engines for its aircraft and the Army's contractual commitments to existing manufacturers.

With the approach of war, increasing orders for the M4 tanks were causing supply issues with the 9-cylinder radial Wright R-975 Whirlwind engine used. The U.S. Army decided it needed to source an additional engine supplier, choosing a version of the Ford GAA cut down from 12 cylinders to 8 for various applications.

Production

All-aluminum Ford GAF V8 tank engine, next to an M26 Pershing, The Tank Museum
  • The GAA was used in the M4A3 (1,690), M4A3(75)W (3,071), M4A3(76)W (1,400), M4A3 (105) (500), M4A3E2 (254), M4A3(76)W HVSS (3,142), M4A3(105) HVSS (2,539), M10A1 (1,413), and M7B1 (826).
  • The GAF powered the M26 (2,222), M26A1, T28/T95 Super Heavy Tank (2), and M45 (185).
  • The GAN powered the T23 (248) and M4A3E2 (254).
  • In order to meet the need for a larger engine, Ford resurrected the V-12 as the GAC, which produced 770 hp (570 kW) and powered the T29, T32 (6).
  • A number of M74 tank recovery vehicles were rebuilt from M4A3s, which used the GAA.[4]

See also

Notes

  1. ^ Berndt, Thomas. Standard Catalog of U.S. Military Vehicles (Krause Publications, 1993), p.193.
  2. ^ a b Berndt, p.190.
  3. ^ Berndt, pp.190 & 193.
  4. ^ Berndt, p.193.

References

  • Berndt, Thomas. Standard Catalog of U.S. Military Vehicles. Iola, WI: Krause Publications, 1993. ISBN 0-87341-223-0.
  • Sprowl, Bob. Ford's First Dual Over Head Cam V-8.
  • Aircraft Engine Historical Society.Aircraft Engines in Armored Vehicles
  • Hunnicutt, R. P. Firepower: A History of the American Heavy Tank. Novato, California: Presidio Press, 1988. ISBN 0-89141-304-9
Retrieved from "https://en.wikipedia.org/w/index.php?title=Ford_GAA_engine&oldid=963790966"