Jump to content

Freedom 35

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 11:51, 26 October 2020 (Removed parameters. | You can use this bot yourself. Report bugs here. | Suggested by Abductive | Category:Keelboats | via #UCB_Category 627/785). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Freedom 35
Development
DesignerDavid Pedrick
LocationUnited States
Year1993
Builder(s)Columbia Yachts
NameFreedom 35
Boat
Displacement14,611 lb (6,627 kg)
Draft6.50 ft (1.98 m)
Hull
TypeMonohull
ConstructionFiberglass
LOA35.40 ft (10.79 m)
LWL29.90 ft (9.11 m)
Beam12.00 ft (3.66 m)
Engine typeYanmar 3GM30F 27 hp (20 kW) diesel engine
Hull appendages
Keel/board typefin keel
Ballast4,465 lb (2,025 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height39.90 ft (12.16 m)
J foretriangle base11.50 ft (3.51 m)
P mainsail luff45.20 ft (13.78 m)
E mainsail foot16.80 ft (5.12 m)
Sails
SailplanFractional rigged sloop
Mainsail area379.68 sq ft (35.273 m2)
Jib/genoa area229.43 sq ft (21.315 m2)
Total sail area609.11 sq ft (56.588 m2)

The Freedom 35 is an American sailboat that was designed by David Pedrick as a racer/cruiser and first built in 1993.[1][2][3]

Production

The design was built by Tillotson Pearson for Freedom Yachts in the United States starting in 1993, but it is now out of production.[1][3][4]

Design

The Freedom 35 is a recreational keelboat, built predominantly of fiberglass with a balsa core, and with wood trim. It has a free-standing (unstayed) fractional sloop rig, a raked stem, a walk-through reverse transom with a swimming platform, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel or optional wing keel. It displaces 14,611 lb (6,627 kg) and carries 4,465 lb (2,025 kg) of ballast.[1][3]

The boat has a draft of 6.50 ft (1.98 m) with the standard keel and 4.5 ft (1.4 m) with the optional shoal draft wing keel.[1]

The boat is fitted with a Japanese Yanmar 3GM30F diesel engine of 27 hp (20 kW) for docking and maneuvering. The fuel tank holds 35 U.S. gallons (130 L; 29 imp gal) and the fresh water tank has a capacity of 70 U.S. gallons (260 L; 58 imp gal).[1]

Sleeping accommodations are provided below decks for six people. There is a forward "V"-berth, an aft stateroom, with an athwartship berth and two settee berths in the main cabin. The aft cabin with its athwartship berth results in a wider beam and a wider cockpit above it. There is a stand-up nav station. The galley is at the foot of the companionway steps, on the port side, and includes a two-burner propane stove, an icebox and a double sink. The head is located on the starboard side, opposite the galley and includes a separate shower. Pressurized hot and cold water is optional. The interior is trimmed with cherry wood.[3]

Ventilation is provided by a cabin hatch and there are also two skylights.[3]

All the sheets and halyards are led to the large, "T"-shaped cockpit, over the cabin roof. There are two genoa winches.[3]

Operational history

In a 1994 review Richard Sherwood wrote, "Freedom Yachts was the first to emphasize free-standing rigs for cruising and continues with this design by David Pedrick. This design, however, is intended for faster sailing than other Freedom designs, such as the 38. The wing keel is designed for shallow-water cruising, and the deep keel for racing. There are racing sail options, such as overlapping jibs, spinnakers, and running backstays for mast control."[3]

Thom Burns, writing in Sailing Breezes, concluded of the design, "The Freedom 35 is a well-built, cruising boat which can be easily handled by a non-athletic couple or single-handed. It affords nice creature comforts while maintaining an essential degree of privacy for two couples or a family out for a couple of weeks. The simplicity of the rig provides for a very uncluttered deck and excellent sailing performance. "[5]

Famed yacht designer Robert Perry reviewed the boat in Sailing magazine in August 2000 and wrote, "the Freedom 35 uses its volume to great advantage and gives us an interior layout that you wouldn't have found in 40-footers 20 years ago. The aft cabin uses an athwartships double berth tucked under the cockpit sole. The head is spacious and includes a shower stall with a nifty wet locker space outboard. The galley is a bit small but there has to be some sacrifice when you put two private sleeping areas into a 35-footer. The nav station faces aft and uses the starboard settee for the seat. The dining table stows neatly out of the way on the forward bulkhead to open up the main cabin. The V-berth area is large and converts to a double berth. Note that the engine is located amidships under the galley counter and settee seat. There is little more you could ask from the layout of a 35-footer."[6]

See also

Similar sailboats

References

  1. ^ a b c d e McArthur, Bruce (2019). "Freedom 35 (Pedrick) sailboat". sailboatdata.com. Archived from the original on 8 December 2019. Retrieved 9 January 2020.
  2. ^ McArthur, Bruce (2019). "David Pedrick". sailboatdata.com. Archived from the original on 8 December 2019. Retrieved 9 January 2020.
  3. ^ a b c d e f g Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 276-277. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
  4. ^ McArthur, Bruce (2019). "Freedom Yachts". sailboatdata.com. Archived from the original on 18 October 2018. Retrieved 9 January 2020.
  5. ^ Burns, Thom. "The Freedom 35". Sailing Breezes. Archived from the original on 12 September 2019. Retrieved 12 January 2020.
  6. ^ Perry, Bob (28 August 2000). "Perry Design Review: Freedom 35". Sailing. Archived from the original on 13 May 2018. Retrieved 12 January 2020.