XTI TriFan 600
XTI TriFan 600 | |
---|---|
File:XTI trifan 600.png | |
Role | VTOL aircraft |
National origin | United States |
Designer | XTI Aircraft Company |
Status | Under development |
The XTI TriFan 600 is a vertical takeoff and landing aircraft designed by Denver-based XTI Aircraft Company.
Development
In June 2017, a 65%-scale proof-of-concept began fabrication at Placerville Airport, CA, to validate the aircraft's configuration. Trek Aerospace manufactured the ducts and assembled the 65%-scale demonstrator, only powered by an XTI-Trek Aerospace battery pack. MGM Compro, based in Zlín, Czech Republic, supplied its electric motors and controllers. It was completed in December 2018 and unveiled in January 2019.[1]
Between January and April 2019, the prototype was ground tested to validate the electric motors, battery systems, ducts, propellers, flight controls, systems, and instrumentation. It first flew tethered on May 2, 2019, and conducted multiple controlled hovers. Untethered hovering, forward wing-borne flight, and the transition between should follow and four to six months of subsequent testing is scheduled on Deseret UAS's Tekoi test site near Tooele, Utah.[1]
The first full-scale prototype should begin construction before May 2020 and fly at the end of the year. By May 2019, XTI had 77 reservations, for a $500 million value or $6.5 million for each aircraft. Development is funded by XTI founder David Brody, private equity investors, and crowdfunding stakeholders. A funding round took place in September 2018; another should raise $25 million and a third will seek $75 million, for a $175 million total development cost.[2]
In July 2019, the GE Catalyst was selected to power the aircraft.[3]
Design
The TriFan 600 is a six-seat fixed-wing aircraft powered by three ducted fans: two pivoting on the wing and one in the aft fuselage, lifting the aircraft in VTOL. It will have a 37.7 ft (11.5 m) wingspan and a 38.7 ft (11.8 m) length, with single 6 ft (1.8 m) diameter propellers in the wing ducts and two 5 ft (1.5 m) diameter co-axial propellers in the aft duct.[1]
The hybrid electric propulsion system include a single 1,000 shp (745 kW) Honeywell HTS900 turboshaft driving three generators, powering two 350 hp (260 kW) electric motors for the wing ducts and one each for the aft propellers. It should reach 340 kn (630 km/h) and cross 650 nmi (1,200 km) in VTOL operations or 1,200 nmi (2,200 km) from a runway.[1]
Specifications
Data from Electric VTOL News.[1]
General characteristics
- Crew: 1-2
- Capacity: 4-5
- Length: 11.8 m (38.7 ft)
- Wingspan: 11.5 m (37.7 ft)
- Powerplant: 1 × Honeywell HTS900 turboshaft, 745 kW (999 hp)
- Powerplant: 4 × electric motors , 260 kW (350 hp) each
- Main rotor diameter: 1.5 m (4 ft 11 in) co-axial aft duct
- Propellers: 2 x 1.8 m diameter wing duct
Performance
- Maximum speed: 630 km/h (390 mph, 340 kn)
- Range: 1,200 km (750 mi, 650 nmi) in VTOL, 2,200 km (1,200 nmi) from a runway
- Service ceiling: 8,800 m (29,000 ft) [2]
- Time to altitude: 10 min[2]
See also
Aircraft of comparable role, configuration, and era
References
- ^ a b c d e "XTI TriFan 665 flies!". Electric VTOL News. Vertical Flight Society. May 8, 2019.
- ^ a b c Kate Sarsfield (13 May 2019). "TriFan 600 scaled prototype takes flight". Flightglobal.
- ^ Kate Sarsfield (23 July 2019). "XTI selects Catalyst engine for hybrid-electric TriFan 600". Flightglobal.
External links
- Official website
- Robert W. Moorman. "XTI Aircraft's TriFan 600 Development Continues". Vertiflite.