Jump to content

Blaser R93

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Sauer202 (talk | contribs) at 01:47, 4 January 2021. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Blaser R93
TypePrecision rifle
Place of originGermany
Production history
DesignerMeinhard Zeh
Designed1993
ManufacturerBlaser
Produced1993–2016
No. built200,000+
VariantsBlaser 93 Tactical
Specifications
CaliberVarious; see [1]
ActionRadial locking straight-pull bolt-action
Feed system3- or 4- round internal box magazine
SightsAperture-type iron sights or telescopic sight
Blaser R93 and binoculars
Blaser R93 on a wild boar hunt trophy photo
Blaser R93 on a Hippopotamus hunt trophy photo

The Blaser R93 is a German straight-pull action precision rifle offered in a multitude of calibers and barrel lengths.[1][2] Designed by Blasers' designer Mr. Meinhard Zeh in 1993, it had a number of features rare on modern hunting rifles, including a manual cocking system and a proprietary Blaser saddle scope mount[1] for mounting the optic directly to the quick-change barrel

In 2002, more than 100,000 complete Blaser R93 rifles had been produced.[3] By 2017, more than 200,000 R93 rifles had been produced,[4] but it is not clear whether the R93 Tactical variant is included in these numbers.

History

The predecessor of the R93 was the 60 degree turn bolt action Blaser R84, which was discontinued after the introduction of the R93 in 1993.

The successor of R93, Blaser R8, was introduced in 2008. Production of the R93 ended around 2016/2017.

Design features

Modularity

The Blaser R93 is a truly modular system built around an aluminium alloy frame, offering differing stocks and barrels varying length and thickness available in chamberings from .22 LR to .375 H&H Magnum/.416 Remington Magnum/.458 Winchester Magnum size. It also came in caliber 28 (13.97 mm; 0.550 in) as a shotgun/slug barrel.

The barrel has a quick-change design which lets the user switch barrels using two screws and a hex key. Different bolt heads for different groups of calibers and magazine inserts are also user changeable, making the Blaser R93 a modular firearm capable of using a multitude of calibers in its chassis.[1] A R93 Rimfire conversion kit was also available in .22 Long Rifle and .17 HMR consisting of a new magazine, barrel, bolt head and bolt catch insert.

The rifle has a shorter overall length compare to more traditional designs due to the trigger being placed under the magazine. The rifle also has a reputation for being easy to disassemble and reassemble which can be an advantage when doing maintenance or during travelling, and has a reputation for having a repeatable zero upon reassembly.

Scope mounts

The Blaser is unique because the scope mounts on the barrel instead of the receiver. A Scope/barrel assembly can be removed and replaced with no change in zero.[1] In 2009, Blaser and Carl Zeiss AG began offering a scope that switches on a red dot when the R93/R8 are cocked ("Zeiss Illumination Control/iC"). The iC system is based on the Zeiss rail.

Trigger

To avoid accidents with set triggers,[citation needed] Blaser offers the R93 only with a direct trigger, also known as single-stage triggers. The manual cocking system, or "de-cocking safety", enables the shooter to securely carry the weapon, only cocking the rifle just before the shot.[2]

Bolt design

The R93 straight-pull bolt action locks by a 14-lug radial collet in a 360 degrees groove in the barrel and is designed to withstand pressures significantly exceeding the Mauser 98–type bolt-action rifles. The Blaser R93 displays a locking surface of 66 mm2 (0.102 in2) compared to 56 mm2 (0.087 in2) for the Mauser 98. The bolt is symmetric and self-centering, providing a basis for increased accuracy. The stressed parts are made out of hammer forged steel and plasma nitrided to provide corrosion resistance and mechanical strength. In addition to the primary lockup by the bolt head into the barrel, the R93 also features a secondary lockup for added safety. While secondary lockup on turn bolt rifles is achieved with the bolt handle, secondary lockup on the R93 this is achieved with a camplate which supports the locked action against a hardened steelplate in the rear part of the magazine-box. The bolt knob uses M6 threads, enabling enabling the use of aftermarket bolt knobs.

Available chamberings

Below is a list of some of the available factory chamberings for the R93. Several different barrel profiles were also available, such as Standard, Octogonal, Semi Weight, "Stutzen", Match or Safari [5] Letters in parenthesis corresponding stamping on the bolt head.

Hornet (HO)
Mini (MI) caliber group
Standard (ST) caliber group
Medium (ME) caliber group
Magnum (MA) caliber group
Ultra Magnum (UM) caliber group
Jeffery (JE) caliber group
Swiss (CH) caliber group
Shot (28) caliber group
  • Caliber 28 (13.97 mm; 0.550 in) shotgun/slug barrel.

Successors

The R93 was upgraded to the Blaser R8 introduced in 2008, which has a detachable box magazine/trigger combination. Production of complete R93 rifles ceased in 2016.[9] The Blaser R8 displays an enlarged locking surface of 96 mm2 (0.149 in2) compared to 66 mm2 (0.102 in2) of the R93.[10] While the R93 collet has a locking angle of about 50 degrees, the angle of the R8 has been steepened to almost 90 degrees. Further the radial collet opens differently. This results in a less smooth operating bolt of the R8 when compared to the R93 series and some weight increase. Other differences are that the R8 is a little heavier and is offered in a wider range of chamberings. Parts for the R93 in general do not fit the R8 series rifles, except for scope mounts.

Recalls

In 2000, a recall was announced on R93 rifles delivered with plastic bolt carriers. According to Blaser, only 0.4% of all R93 rifles had been delivered with plastic bolt carriers, and only on the R93 Offroad model. Due to the increased risk of accidents, Blaser offered to replace all such plastic bolt carriers with a regular aluminum bolt carrier for free.[11]

In May 2003, Blaser issued a recall on all R93 rifles sold in the United States, except the UIT, CISM, and LRS/LRS2 models, because non-stainless steel pins inadvertently had been used in some trigger units. Owners were urged to have their rifles inspected by Blaser's US representative to see if their trigger unit was affected, and if so be changed from a non-stainless to a stainless one.[12][13][14][15][16][17]

Incidents

In 1994, after a shooting accident near Koblenz in Germany, the R93 was criticised with claims that it could not withstand high pressures, and that the bolt would unlock when excessive pressures were generated.[citation needed]

In August 2003, 41-year-old Norwegian Jan Sørlie had an accident where his R93 chambered for 8×68mm S exploded, resulting in loss of an eye and a skull fracture requiring titanium replacement.[18][19] Sørlie reported that had used handloaded ammunition loaded with 5.05 g (77.9 gr) Norma MRP powder and a 12.7 g (196 gr) projectile.[18][19]

In January 2004, 38-year-old German Albrecht Huf had an accident near Koblenz in Germany where his R93 chambered in .300 Weatherby Magnum exploded. Huf sustained injury to his thumb, jaw and zygomatic bone. He claimed to have used Weatherby factory ammunition only.[20] An investigation by the German DEVA institute concluded that handloaded .300 Weatherby Magnum ammunition had been used that greatly exceeded the maximum safe gas pressure for the round.[21]

In July 2009, Spaniard Jesus Nieto had an accident near Madrid in Spain where his R93 rifle chambered for 7mm Remington Magnum exploded, causing the bolt carrier to hit and damage his maxilar bone. The accident was determined by the shooter to be due to faulty ammunition leaving a fired bullet stuck in the barrel, causing an explosion on the subsequent shot. The shooter stated that he had used Remington Safari Grade commercial ammunition.[19]

In July 2014, 69-year-old Christer Svensson experienced an accident where his R93 chambered for .30-06 Springfield exploded while loading his rifle on a shooting range near Bollnäs in Sweden, resulting in the bolt hitting his face.[22] Svensson was using Norma factory ammunition. He turned in the rifle to Blaser, but wanted the Swedish National Forensic Centre to investigate the matter. However, he later agreed to the wish of Blaser and its Swedish distributors that all technical investigation would be performed by the German DEVA institute. The DEVA report concluded that the damages to the firearm almost certainly came from a combination of an overpressure and a problem with the casing of the cartridge.[23] Svensson told the Swedish hunting and firearms magazine Svensk Jakt that he had difficulties getting his firearm back from the testing, and that it had been modified when he finally received it. He stated that the chamber and bolt head had been chopped off, and that the barrel did not have a stamped serial number anymore, and claimed the serial number appeared to have been reapplied by hand. He also claimed his rifle originally had a front sight mounted to it which was missing on the returned barrel.

In August 2014, Svensk Jakt wrote that another Swede, Tony Kristoffersson, had experienced an explosion with his R93 while on a Beaver hunt the same year. He described that his rifle had made a clicking sound as if it had failed to fire, but exploded when he tried to pull the bolt back, which resulted in the bolt hitting his hand.[23] The Swedish Blaser distributor later stated that while it is possible to pull the trigger without the bolt being fully locked into battery, the firing pin is designed such that it will not hit the primer with sufficient force to ignite the cartridge.

See also

References

  1. ^ a b c d De Vries III, George. "Blaser R93 Rifles". chuckhawks.com. Retrieved 26 February 2017.
  2. ^ a b "Blaser R93 Bolt-Action Rifles". marcopolooutfitters.com. Retrieved 26 February 2017.
  3. ^ Blaser 9/100000 "After producing the Blaser R 93 for almost a decade, 2002 marks the year that the 100,000th straight pull bolt-action rifle went into production."
  4. ^ Blaser USA: Luxus - Production of R93 stopped
  5. ^ Blaser R93 Rifle Specfications - The Modular System
  6. ^ a b c R-93 LRS 2 - GA USA 2002
  7. ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad Blaser R93 Manual
  8. ^ a b c d e f R93 Caliber Overview 2016 - Caliber Group ST
  9. ^ "R93 Bolt Rifle". blaser-usa.com. Retrieved 26 February 2017.
  10. ^ "Jagdfregatte R8 {German}". Archived from the original on 17 November 2015. Retrieved 16 November 2015.
  11. ^ Deutsche Jagd Zeitung - Rückruf-Aktion der R 93
  12. ^ Firearm Recalls and Safety Warnings 1- FirearmsID.com
  13. ^ SIGARMS, Inc. Website, August 5, 2002
  14. ^ SIGARMS, Inc. Consumer Subscription E Mail Newsletter, Volume C2, Number 3:9
  15. ^ American Hunter, October 2002, page 20
  16. ^ American Rifleman, November 2002; page 89
  17. ^ Shooting Sports Retailer, September/October 2002, page 59
  18. ^ a b Villmarksliv Magazine, 2004 March Edition
  19. ^ a b c Lutz Möller Geschoß - Blaser R93 Unfälle
  20. ^ "Deutsche Jagd Zeitung 2004-01-20 Unfall durch Waffensprengung". Archived from the original on 12 March 2005. Retrieved 12 March 2005.
  21. ^ Blaser R93 accident Archived 12 February 2011 at the Wayback Machine, lawers cooperation (Rechtsanwaltsaktiengesellschaft) Nieding + Barth (German)
  22. ^ Vapenexplosion kostade honom nästan livet - Svensk Jakt
  23. ^ a b Saknade delar och polisanmälan – Blaserhistorien fortsätter - Svensk Jakt
Wikimedia Commons has media related to Blaser R93.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Blaser_R93&oldid=998150057"