Pound (force)

"klbf" redirects here. For the airport in North Platte, Nebraska, assigned the ICAO code KLBF, see North Platte Regional Airport.

For the unit of mass, see Pound (mass). For the basis weight of paper, see Paper density. For the monetary unit, see Pound (currency).

Pound-force
Unit system	English Engineering units, British Gravitational System
Symbol	lbf
Conversions
1 lbf in ...	... is equal to ...
SI units	4.448222 N
CGS units	444,822.2 dyn
Absolute English System	32.17405 pdl

The pound of force or pound-force (symbol: lbf, sometimes lb_f,) is a unit of force used in some systems of measurement including English Engineering units and the foot–pound–second system. Pound-force should not be confused with foot-pound, a unit of energy, or pound-foot, a unit of torque, that may be written as "lbf⋅ft"; nor should these be confused with pound-mass (symbol: lb), often simply called pound, which is a unit of mass.

Definitions

The pound-force is equal to the gravitational force exerted on a mass of one avoirdupois pound on the surface of Earth. Since the 18th century, the unit has been used in low-precision measurements, for which small changes in Earth's gravity (which varies from place to place by up to half a percent) can safely be neglected.

The 20th century, however, brought the need for a more precise definition. A standardized value for acceleration due to gravity was therefore needed.

Product of avoirdupois pound and standard gravity

The pound-force is the product of one avoirdupois pound (exactly 0.45359237 kg) and the standard acceleration due to gravity, 9.80665 m/s² (32.174049 ft/s²).

The standard values of acceleration of the standard gravitational field (g_n) and the international avoirdupois pound (lb) result in a pound-force equal to 4.4482216152605 N.

${\begin{aligned}1\,{\text{lbf}}&=1\,{\text{lb}}\times g_{\text{n}}\\&=1\,{\text{lb}}\times 9.80665\,{\tfrac {\text{m}}{{\text{s}}^{2}}}/0.3048\,{\tfrac {\text{m}}{\text{ft}}}\\&\approx 1\,{\text{lb}}\times 32.174049\,\mathrm {\tfrac {ft}{s^{2}}} \\&\approx 32.174049\,\mathrm {\tfrac {ft{\cdot }lb}{s^{2}}} \\1\,{\text{lbf}}&=1\,{\text{lb}}\times 0.45359237\,{\tfrac {\text{kg}}{\text{lb}}}\times g_{\text{n}}\\&=0.45359237\,{\text{kg}}\times 9.80665\,{\tfrac {\text{m}}{{\text{s}}^{2}}}\\&=4.4482216152605\,{\text{N}}\end{aligned}}$

This definition can be rephrased in terms of the slug. A slug has a mass of 32.174049 lb. A pound-force is the amount of force required to accelerate a slug at a rate of 1 ft/s², so:

${\begin{aligned}1\,{\text{lbf}}&=1\,{\text{slug}}\times 1\,{\tfrac {\text{ft}}{{\text{s}}^{2}}}\\&=1\,{\tfrac {{\text{slug}}\cdot {\text{ft}}}{{\text{s}}^{2}}}\end{aligned}}$

Conversion to other units

Units of force

	newton	dyne	kilogram-force, kilopond	pound-force	poundal
1 N	≡ 1 kg⋅m/s2	= 105 dyn	≈ 0.10197 kp	≈ 0.22481 lbF	≈ 7.2330 pdl
1 dyn	= 10−5 N	≡ 1 g⋅cm/s2	≈ 1.0197×10−6 kp	≈ 2.2481×10−6 lbF	≈ 7.2330×10−5 pdl
1 kp	= 9.80665 N	= 980665 dyn	≡ gn × 1 kg	≈ 2.2046 lbF	≈ 70.932 pdl
1 lbF	≈ 4.448222 N	≈ 444822 dyn	≈ 0.45359 kp	≡ gn × 1 lb	≈ 32.174 pdl
1 pdl	≈ 0.138255 N	≈ 13825 dyn	≈ 0.014098 kp	≈ 0.031081 lbF	≡ 1 lb⋅ft/s2
The value of gn (9.80665 m/s2) as used in the official definition of the kilogram-force is used here for all gravitational units.

Foot–pound–second (FPS) systems of units

Main article: Foot–pound–second system

In some contexts, the term "pound" is used almost exclusively to refer to the unit of force and not the unit of mass. In those applications, the preferred unit of mass is the slug, i.e. lbf⋅s²/ft. In other contexts, the unit "pound" refers to a unit of mass. The international standard symbol for the pound as a unit of mass is lb.

Three approaches to units of mass and force or weight

Base	Force		Weight		Mass
2nd law of motion	m = ⁠F/a⁠		F = ⁠W ⋅ a/g⁠		F = m ⋅ a
System	BG	GM	EE	M	AE	CGS	MTS	SI
Acceleration (a)	ft/s2	m/s2	ft/s2	m/s2	ft/s2	Gal	m/s2	m/s2
Mass (m)	slug	hyl	pound-mass	kilogram	pound	gram	tonne	kilogram
Force (F), weight (W)	pound	kilopond	pound-force	kilopond	poundal	dyne	sthène	newton
Pressure (p)	pound per square inch	technical atmosphere	pound-force per square inch	standard atmosphere	poundal per square foot	barye	pieze	pascal

In the "engineering" systems (middle column), the weight of the mass unit (pound-mass) on Earth's surface is approximately equal to the force unit (pound-force). This is convenient because one pound mass exerts one pound force due to gravity. Note, however, unlike the other systems the force unit is not equal to the mass unit multiplied by the acceleration unit—the use of Newton's second law, F = m ⋅ a, requires another factor, g_c, usually taken to be 32.174049 (lb⋅ft)/(lbf⋅s²). "Absolute" systems are coherent systems of units: by using the slug as the unit of mass, the "gravitational" FPS system (left column) avoids the need for such a constant. The SI is an "absolute" metric system with kilogram and meter as base units.

Pound of thrust

Further information: thrust

The term pound of thrust is an alternative name for pound-force in specific contexts. It is frequently seen in US sources on jet engines and rocketry, some of which continue to use the FPS notation. For example, the thrust produced by each of the Space Shuttle's two Solid Rocket Boosters is 3,300,000 pounds-force (14.7 MN), together 6,600,000 pounds-force (29.36 MN).

See also

• Foot-pound (energy)
• Ton-force
• Kip (unit)
• Mass in general relativity
• Mass in special relativity
• Mass versus weight for the difference between the two physical properties
• Newton
• Poundal
• Pounds per square inch, a unit of pressure

Sources

• Obert, Edward F., “THERMODYNAMICS”, D.J. Leggett Book Company Inc., New York 1948; Chapter I, Survey of Dimensions and Units, pages 1-24.