Jump to content

Alburg Springs–Clarenceville Border Crossing

Coordinates: 45°00′47″N 73°12′44″W / 45.013042°N 73.212183°W / 45.013042; -73.212183
From Wikipedia, the free encyclopedia
Alburg Springs–Clarenceville Border Crossing
US Border Inspection Station, Alburg Springs, Vermont
Location
CountryUnited States; Canada
Location
Coordinates45°00′47″N 73°12′44″W / 45.013042°N 73.212183°W / 45.013042; -73.212183
Details
Opened1933
US Phone(802) 796-3704
Canadian Phone(514) 294-2288
Hours8:00 AM–midnight
Website
Official Canadian website https://www.cbp.gov/contact/ports/highgate-springs-vermont-0212
U.S. Inspection Station-Alburg Springs, Vermont
MPSU.S. Border Inspection Stations MPS
NRHP reference No.14000607
Added to NRHPSeptember 10, 2014

The Alburg Springs–Clarenceville Border Crossing connects the villages of Clarenceville, Quebec and Alburgh, Vermont on the Canada–United States border. The border crossing is open daily between 8:00 AM and 4:00 pm. Canada built a new border inspection station in 2005, while the US continues to use its Depression-era border station, listed on the National Register of Historic Places in 2014.[1]

United States border station

[edit]

The United States border station is located on the west side of Alburg Springs Road, just south of the border. The inspection station is a two-story brick building, with a gabled roof, and a hip-roofed porte-cochere that extends across the southbound traffic way. The building has Colonial Revival styling, and is basically symmetrical, with a center entrance and flanking sash windows with concrete sills. Set above each window is a decorative brickwork element. The porte-cochere is supported by square wooden columns (engaged to the building at the western end), with a wraparound frieze below the roof. The building interior, originally predominantly living space, is now office space on the ground floor. The upstairs living spaces retain most of their original finishes.[2]

The station was built in 1937, and follows a standard plan for a 3-bay inspection building. Originally seven such stations were built on the Canadian border, and this is one of two that survive with only modest alteration. (The other is at the Ferry-Midway Border Crossing in Ferry County, Washington.) It was built as part of a program to improve border security, prompted by the increasing use of the automobile, the smuggling of alcohol during Prohibition, and the tightening of immigration laws in the early 1920s. Because of its remote location, it was designed to include housing for the principal customs and immigration officers and their families. These stations were designed in the Colonial Revival style as a distinctive nod to American architectural heritage.[2] The facility was listed on the National Register of Historic Places in 2014.

Canada border station

[edit]
Canada border inspection station at Clarenceville, QC as seen in 2002

The current Canada border station was built in 2005. Prior to that, Canada utilized the 1940s-era border station (pictured), a design that was widely used throughout the US-Canada border.

See also

[edit]

References

[edit]
  1. ^ "National Register of Historic Places listings for September 19, 2014". U.S. National Park Service. September 19, 2014. Retrieved September 20, 2014.
  2. ^ a b "NRHP nomination for Alburg Springs Inspection Station" (PDF). National Park Service. Retrieved 2016-11-05.