Α-Methylstyrene
Appearance
| |||
Names | |||
---|---|---|---|
IUPAC name
Isopropenylbenzene
| |||
Other names
α-Methylstyrene; 2-Phenyl-1-propene; 1-Methyl-1-phenylethylene; 2-Phenylpropene; (1-Methylethenyl)benzene; beta-Phenylpropene; 2-Phenylpropylene; beta-Phenylpropylene; alpha-Methylstyrol; 1-Phenyl-1-methylethylene; 2-Phenyl-2-propene
| |||
Identifiers | |||
3D model (JSmol)
|
|||
Abbreviations | AMS | ||
ChemSpider | |||
ECHA InfoCard | 100.002.459 | ||
KEGG | |||
PubChem CID
|
|||
CompTox Dashboard (EPA)
|
|||
| |||
| |||
Properties | |||
C9H10 | |||
Molar mass | 118.179 g·mol−1 | ||
Appearance | Colorless liquid | ||
Density | 0.91 g/cm3 | ||
Melting point | −24 °C (−11 °F; 249 K) | ||
Boiling point | 165 to 169 °C (329 to 336 °F; 438 to 442 K) | ||
Insoluble | |||
Vapor pressure | 2 mmHg (20 °C)[1] | ||
-80.1·10−6 cm3/mol | |||
Hazards | |||
NFPA 704 (fire diamond) | |||
Flash point | 45 °C (113 °F; 318 K) | ||
Explosive limits | 1.9–6.1%[1] | ||
Lethal dose or concentration (LD, LC): | |||
LD50 (median dose)
|
4900 mg/kg (oral, rat)[2] | ||
NIOSH (US health exposure limits): | |||
PEL (Permissible)
|
C 100 ppm (480 mg/m3)[1] | ||
REL (Recommended)
|
TWA 50 ppm (240 mg/m3) ST 100 ppm (485 mg/m3)[1] | ||
IDLH (Immediate danger)
|
700 ppm[1] | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
α-Methylstyrene (AMS) is a chemical intermediate used in the manufacture of plasticizers, resins and polymers.[3] It is a co-product formed in a variation of the cumene process. The homopolymer obtained from this monomer, poly(α-methylstyrene), is unstable, being characterized by a low ceiling temperature.[4]
References
- ^ a b c d e NIOSH Pocket Guide to Chemical Hazards. "#0429". National Institute for Occupational Safety and Health (NIOSH).
- ^ "alpha-Methyl styrene". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
- ^ "What is alpha-methylstyrene (AMS)?". Archived from the original on 2007-02-28. Retrieved 2009-01-07.
{{cite web}}
: Unknown parameter|dead-url=
ignored (|url-status=
suggested) (help) - ^ Stevens, Malcolm P. (1999). "6". Polymer Chemistry an Introduction (3rd ed.). New York: Oxford University Press. pp. 193–194. ISBN 978-0-19-512444-6.