Jump to content

Electronic countermeasure

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 152.115.81.90 (talk) at 09:59, 4 December 2015 (→See also). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Inspecting an AN/ALQ-184 Electronic Attack Pod.

An electronic countermeasure (ECM) is an electrical or electronic device designed to trick or deceive radar, sonar or other detection systems, like infrared (IR) or lasers. It may be used both offensively and defensively to deny targeting information to an enemy. The system may make many separate targets appear to the enemy, or make the real target appear to disappear or move about randomly. It is used effectively to protect aircraft from guided missiles. Most air forces use ECM to protect their aircraft from attack. It has also been deployed by military ships and recently on some advanced tanks to fool laser/IR guided missiles. It is frequently coupled with stealth advances so that the ECM systems have an easier job. Offensive ECM often takes the form of jamming. Defensive ECM includes using blip enhancement and jamming of missile terminal homers.

History

First example of electronic countermeasures being applied in a combat situation took place during the Russo-Japanese war. On April 15, 1904, Russian wireless telegraphy stations installed in the Port Arthur fortress and on board Russian light cruisers successfully interrupted wireless communication between a group of Japanese battleships. The spark-gap transmitters in the Russian stations generated senseless noise while the Japanese were making attempts to coordinate their efforts in the bombing of a Russian naval base. Germany and United Kingdom interfered with enemy communications along the western front during World War I while the Royal Navy tried to intercept German naval radio transmissions.[1] There were also efforts at sending false radio signals, having shore stations send transmissions using ships' call signs, and jamming enemy radio signals.[1]

World War II ECM expanded to include dropping chaff (originally called Window), jamming and spoofing radar and navigation signals.[1] German bomber aircraft navigated using radio signals transmitted from ground stations, which the British disrupted with spoofed signals in the Battle of the Beams. During the RAF's night attacks on Germany the extent of electronic countermeasures was much expanded, and a specialised organisation, No. 100 Group RAF, was formed to counter the increasing German night fighter force and radar defences. Cold War developments included anti-radiation missiles designed to home in on enemy radar transmitters.[1]

Radar ECM

Main article: Radar jamming and deception

Basic radar ECM strategies are (1) radar interference, (2) target modifications, and (3) changing the electrical properties of air.[1] Interference techniques include jamming and deception. Jamming is accomplished by a friendly platform transmitting signals on the radar frequency to produce a noise level sufficient to hide echos.[1] The jammer's continuous transmissions will provide a clear direction to the enemy radar, but no range information.[1] Deception may use a transponder to mimic the radar echo with a delay to indicate incorrect range.[1] Transponders may alternatively increase return echo strength to make a small decoy appear to be a larger target.[1] Target modifications include radar absorbing coatings and modifications of the surface shape to either "stealth" a high-value target or enhance reflections from a decoy.[1] Dispersal of small aluminium strips called chaff is a common method of changing the electromagnetic properties of air to provide confusing radar echos.[1]

Communications ECM

Main article: Radio jamming

Radio jamming or communications jamming is the deliberate transmission of radio signals that disrupt communications by decreasing the signal-to-noise ratio to the point where the target communications link is either degraded or denied service.

Aircraft ECM

German Tornado ECR.

ECM is practiced by nearly all modern military units—land, sea or air. Aircraft, however, are the primary weapons in the ECM battle because they can "see" a larger patch of earth than a sea or land-based unit. When employed effectively, ECM can keep aircraft from being tracked by search radars, or targeted by surface-to-air missiles or air-to-air missiles. An aircraft ECM can take the form of an attachable underwing pod or could be embedded in the airframe. Fighter planes using a conventional electronically scanned antenna mount dedicated jamming pods instead or, in the case of the US, German, and Italian air forces, may rely on electronic warfare aircraft to carry them.

Future Airborne Jammers

The Next Generation Jammer is being developed to replace the current AN/ALQ-99 carried on the E/A-18G and EA-6B electronic warfare planes. Planned for adoption around 2020, it will use a small AESA antenna divided into quadrants[2] for all around coverage and retain the capability of highly directional jamming.

DARPA's Precision Electronic Warfare (PREW) project aims to develop a low-cost system capable of synchronizing several simple airborne jamming pods with enough precision to replicate the directionality of an electronically scanned antenna, avoiding collateral jamming of non-targeted receivers.[3]

An expendable active decoy that uses DRFM technology to jam RF based threats has already been developed by Selex ES.[4] The system, named BriteCloud, is self-contained within a small canister that is similar to a standard flare cartridge. The 55 mm format of the system has undergone flight trials with the Gripen aircraft and the development of a 218 variant is at an advanced stage.[5]

Dedicated ECM aircraft

Shipboard ECM

The ULQ-6 deception transmitter was one of the earlier shipboard ECM installations.[6] The Raytheon SLQ-32 shipboard ECM package came in three versions providing warning, identification and bearing information about radar-guided cruise missiles.[6] The SLQ-32 V3 included quick reaction electronic countermeasures for cruisers and large amphibious ships and auxiliaries in addition to the RBOC (Rapid Blooming Off-board Chaff) launchers found on most surface ships.[6] The BLR-14 Submarine Acoustic Warfare System (or SAWS) provides an integrated receiver, processor, display, and countermeasures launch system for submarines.[6]

Infrared and acoustic analogies

See also: Acoustic quieting

Infrared homing systems can be decoyed with flares[1] and other infrared countermeasures. Acoustic homing and detection systems used for ships are also susceptible to countermeasures. United States warships use Masker and PRAIRIE (PRopellor AIR Ingestion and Emission) systems to create small air bubbles around a ship's hull and wake to reduce sound transmission.[1] Surface ships tow noisemakers like the AN/SLQ-25 Nixie to decoy homing torpedoes.[1] Submarines can deploy similar acoustic device countermeasures (or ADCs) from a 3-inch (75-mm) signal launching tube.[1] United States ballistic missile submarines could deploy the Mark 70 MOSS (MObile Submarine Simulator) decoy from torpedo tubes to simulate a full size submarine.[1] Most navies additionally equip surface ships with decoy launchers.[7]

See also

Notes

  1. ^ a b c d e f g h i j k l m n o p Polmar (1979), p. 121.
  2. ^ [1]
  3. ^ Broad Agency Announcement Precision Electronic Warfare (PREW) STRATEGIC TECHNOLOGY OFFICE DARPA-BAA 09-65
  4. ^ "New Selex ES expendable active decoy 'BriteCloud' selected by Saab for Gripen fighter – DETAIL – Selex ES". selex-es.com.
  5. ^ "Finmeccanica – Selex ES to hold BriteCloud trials with Gripen – DETAIL – Selex ES". selex-es.com.
  6. ^ a b c d e Polmar (1979), p. 122.
  7. ^ [2]

References

Retrieved from "https://en.wikipedia.org/w/index.php?title=Electronic_countermeasure&oldid=693709148"