Jump to content

Experiment (locomotive)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Cydebot (talk | contribs) at 04:11, 14 September 2016 (Robot - Moving category Standard gauge locomotives of the United Kingdom to Category:Standard gauge locomotives of Great Britain per CFD at Wikipedia:Categories for discussion/Log/2016 July 25.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

32 Experiment
Type and origin
Power typeSteam
DesignerRichard Roberts
BuilderRichard Roberts
Build date1833
Specifications
Configuration:
 • Whyte2-2-0
Gauge4 ft 8+12 in (1,435 mm)
Cylinders2
Career
OperatorsLiverpool and Manchester Railway
Dispositionscrapped

Experiment was a steam locomotive designed and built by Richard Roberts in 1833 for the Liverpool and Manchester Railway (L&MR). The locomotive had vertical cylinders driving via bell cranks.

History

L&MR No.32[1] Experiment was built in 1833 with vertical cylinders mounted just behind the chimney, driving the wheels via a bell crank. The locomotive also had piston valves. These valves were probably the reason that the design was not a success, rather than the bell crank transmission, which was used successfully in other locomotives.[2] Another reason that the locomotive was not successful was steam leakage from the cylinders.[1] Experiment was withdrawn after a few months.[2]

Three similar locomotives were built for the Dublin and Kingstown Railway.[1] Locomotives to this design were built for the Dundee and Newtyle Railway, but they were soon altered.[2]

References

  1. ^ a b c "Sharp Roberts & Co". Steam Index. Retrieved 5 April 2008.
  2. ^ a b c "Curiosities of Locomotive Design". Catskill Archive. Retrieved 5 April 2008.