Jump to content

Flat weighting

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Mild Bill Hiccup (talk | contribs) at 03:41, 13 June 2015 (Cleaned up using AutoEd). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In a noise-measuring set, flat weighting is a noise weighting based on an amplitude-frequency characteristic that is flat over a frequency range that must be stated.

Notes

  • Note 1: Flat noise power is expressed in dBrn (f1 − f2) or in dBm (f1 − f2).
  • Note 2: "3 kHz flat weighting" and "15 kHz flat weighting" are based on amplitude-frequency characteristics that are flat between 30 Hz and the frequency indicated.

References

Sources

Public Domain This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).

Retrieved from "https://en.wikipedia.org/w/index.php?title=Flat_weighting&oldid=666713974"