Formal power series
This article needs additional citations for verification. (December 2009) |
In mathematics, formal power series are a generalization of polynomials as formal objects, where the number of terms is allowed to be infinite; this implies giving up the possibility to substitute arbitrary values for indeterminates. This perspective contrasts with that of power series, whose variables designate numerical values, and which series therefore only have a definite value if convergence can be established. Formal power series are often used merely to represent the whole collection of their coefficients. In combinatorics they provide representations of numerical sequences and of multisets, and for instance allow giving concise expressions for recursively defined sequences regardless of whether the recursion can be explicitly solved; this is known as the method of generating functions.
Informal introduction
A formal power series can be loosely thought of as a polynomial with infinitely many terms. Alternatively, for those familiar with power series (or Taylor series), one may think of a formal power series as a power series in which we ignore questions of convergence. For example, consider the series
If we studied this as a power series, its properties would include, for example, that its radius of convergence is 1. However, as a formal power series, we may ignore this completely; all that is relevant is the sequence of coefficients [1, −3, 5, −7, 9, −11, ...]. In other words, a formal power series is just an object that records a sequence of coefficients.
Arithmetic on formal power series is carried out by simply pretending that the series are polynomials. For example, if
then we add A and B term by term:
We can multiply formal power series, again just by treating them as polynomials (see in particular Cauchy product):
Notice that each coefficient in the product AB only depends on a finite number of coefficients of A and B. For example, the x5 term is given by
For this reason, one may multiply formal power series without worrying about the usual questions of absolute, conditional and uniform convergence which arise in dealing with power series in the setting of analysis.
Once we have defined multiplication for formal power series, we can define multiplicative inverses as follows. The multiplicative inverse of a formal power series A is a formal power series C such that AC = 1, provided that such a formal power series exists. It turns out that if A has a multiplicative inverse, it is unique, and we denote it by A −1. Now we can define division of formal power series by defining B / A to be the product B A −1, provided that the inverse of A exists. For example, one can use the definition of multiplication above to verify the familiar formula
An important operation on formal power series is coefficient extraction. In its most basic form, the coefficient extraction operator for a formal power series in one variable extracts the coefficient of xn, and is written e.g. [xn] A, so that [x2] A = 5 and [x5] A = −11. Other examples include
and
Similarly, many other operations that are carried out on polynomials can be extended to the formal power series setting, as explained below.
The ring of formal power series
The set of all formal power series in X with coefficients in a commutative ring R form another ring that is written R[[X]], and called the ring of formal power series in the variable X over R.
Definition of the formal power series ring
One can characterize R[[X]] abstractly as the completion of the polynomial ring R[X] equipped with a particular metric. This automatically gives R[[X]] the structure of a topological ring (and even of a complete metric space). But the general construction of a completion of a metric space is more involved than what is needed here, and would make formal power series seem more complicated than they are. It is possible to describe R[[X]] more explicitly, and define the ring structure and topological structure separately, as follows.
Ring structure
As a set, R[[X]] can be constructed as the set RN of all infinite sequences of elements of R, indexed by the natural numbers (taken to include 0). Designating a sequence whose term at index n is an by , one defines addition of two such sequences by
and multiplication by
This type of product is called the Cauchy product of the two sequences of coefficients, and is a sort of discrete convolution. With these operations, RN becomes a commutative ring with zero element (0, 0, 0, ...) and multiplicative identity (1, 0, 0,...).
The product is in fact the same one used to define the product of polynomials in one indeterminate, which suggests using a similar notation. One embeds R into R[[X]] by sending any (constant) a ∈ R to the sequence (a, 0, 0, ...) and designates the sequence (0, 1, 0, 0, ...) by X; then using the above definitions every sequence with only finitely many nonzero terms can be expressed in terms of these special elements as
these are precisely the polynomials in X. Given this, it is quite natural and convenient to designate a general sequence an by by the formal expression , even though the latter is not an expression formed by the operations of addition and multiplication defined above (from which only finite sums can be constructed). This notational convention allows reformulation the above definitions as
and
which is quite convenient, but one must be aware of the distinction between formal summation (a mere convention) and actual addition.
Topological structure
Having decreed as a convention that
one would like to also give a meaning to the right hand side as an infinite summation. For that, one needs a notion of convergence in RN, in other words one must introduce a topology on RN. There are several equivalent ways to define the appropriate topology.
- We may give RN the product topology, where each copy of R is given the discrete topology.
- We may give RN the I-adic topology, where I = (X) is the ideal generated by X, which consists of all sequences whose first term a0 is zero.
- For those not acquainted with general topology, the desired topology can also be derived from the following metric (or "distance function"). The distance between distinct sequences (an) and (bn) in RN, is defined to be
- where k is the smallest natural number such that ak ≠ bk; the distance between two equal sequences is of course zero.
Informally, two sequences (an) and (bn) become closer and closer if (and only if!) more and more of their terms agree exactly. Formally, the sequence of partial sums of some infinite summation converges if for every fixed power of X the coefficient stabilizes: there is a point beyond which all further partial sums have the same coefficient. This is clearly the case for the right hand side of (1), regardless of the values an, since inclusion of the term for i = n gives the last (and in fact only) change to the coefficient of Xn. It is also obvious that the limit of the sequence of partial sums is equal to the left hand side.
This topological structure, together with the ring operations described above, form a topological ring. This is called the ring of formal power series over R and is denoted by R[[X]]. The topology has the particularly pleasant property that an infinite summation converges if and only if the sequence of its terms converges to 0, which just means that any fixed power of X occurs in only finitely many terms.
The topological structure allows much more flexible use of infinite summations. For instance the rule for multiplication can be restated simply as
since only finitely many terms on the right affect any fixed Xn. Infinite products are also defined by the topological structure; it can be seen that an infinite product converges if and only if the sequence of its factors converges to 1.
Alternative topologies
The above topology is the finest topology for which always converges as a summation to the formal power series designated by the same expression, and it often suffices to give a meaning to infinite sums and products, or other kinds of limits that one wishes to use to designate particular formal power series. It can however happen occasionally that one wishes to use a coarser topology, so that certain expressions become convergent that would otherwise diverge. This applies in particular when the base ring R already comes with a topology other than the discrete one, for instance if it is also a ring of formal power series.
Consider the ring of formal power series
then the topology of above construction only relates to the indeterminate Y, since the topology that was put on has been replaced by the discrete topology when defining the topology of the whole ring. So
converges to the power series suggested, which can be written as ; however the summation
would be considered to be divergent, since every term affects the coefficient of Y (which coefficient is itself a power series in X). This asymmetry disappears if the power series ring in Y is given the product topology where each copy of is given its topology as a ring of formal power series rather than the discrete topology. As a consequence, for convergence of a sequence of elements of it then suffices that the coefficient of each power of Y converges to a formal power series in X, a weaker condition that stabilizing entirely; for instance in the second example given here the coefficient of Y converges to , so the whole summation converges to .
This way of defining the topology is in fact the standard one for repeated constructions of rings of formal power series, and gives the same topology as one would get by taking formal power series in all inderteminates at once. In the above example that would mean constructing , and here a sequence converges if and only if the coefficient of every monomial XiYj stabilizes. This topology, which is also the I-adic topology, where I = (X,Y) is the ideal generated by X and Y, still enjoys the property that a summation converges if and only if its terms tend to 0.
The same principle could be used to make other divergent limits converge. For instance in the limit
does not exist, so in particular it does not converge to . This is because for i≥2 the coefficient of Xidoes not stabilize as n goes to infinity. It does however converge in the usual topology of R, and in fact to the coefficient of exp(X). Therefore, if one would give the product topology of RN where the topology of R is the usual topology rather than the discrete one, then the above limit would converge to exp(X). This more permissive approach is not however the standard when considering formal power series, as it would lead to convergence considerations that are as subtle as they are in analysis, while the philosophy of formal power series is on the contrary to make convergence questions as trivial as they can possibly be. With this topology it would not be the case that a summation converges if and only if its terms tend to 0.
Universal property
The ring R[[X]] may be characterized by the following universal property. If S is a commutative associative algebra over R, if I is an ideal of S such that the I-adic topology on S is complete, and if x is an element of I, then there is a unique Φ : R[[X]] → S with the following properties:
- Φ is an R-algebra homomorphism
- Φ is continuous
- Φ(X) = x.
Operations on formal power series
One can perform algebraic operations on power series to generate new power series.[1][2]
Multiplying series
The product of two series is given by
where
The sequence is the Cauchy product of the sequences and .
Power series raised to powers
If n is a natural number we have
where
for . (This formula can only be used if and are invertible in the ring of scalars.)
Dividing series
where
(This formula can be used only if is invertible in the ring of scalars, but otherwise the existence and uniqueness of the quotient is not guaranteed.)
Inverting series
The series
in R[[X]] is invertible in R[[X]] if and only if its constant coefficient a0 is invertible in R. This is necessary, as the constant term of the product is , and sufficient, via the explicit formula:
An important special case is that the geometric series formula is valid in R[[X]]:
If R=K is a field, then a series is invertible if and only if the constant term is non-zero, i.e., if and only if it is not divisible by X. This says that is a discrete valuation ring with uniformizing parameter X.
Extracting coefficients
The coefficient extraction operator applied to a formal power series
in is written
and extracts the coefficient of , so that
Composition of series
Given formal power series
and
one may form the composition
where the coefficients cn are determined by "expanding out" the powers of f(X):
Here the sum is extended over all (k,j) with and with
A more explicit description of these coefficients is provided by Faà di Bruno's formula, at least in the case where the coefficient ring is a field of characteristic 0.
A point here is that this operation is only valid when f(X) has no constant term, so that the series for g(f(X)) converges in the topology of R[[X]]. In other words, each cn depends on only a finite number of coefficients of f(X) and g(X).
Example
(We assume in this example that the ring R has characteristic 0.) If we denote by exp(X) the formal power series
then the expression
makes perfect sense as a formal power series. However, the statement
is not a valid application of the composition operation for formal power series. Rather, it is confusing the notions of convergence in R[[X]] and convergence in R; indeed, the ring R may not even contain any number e with the appropriate properties.
Composition inverse
Any formal series with has a composition inverse provided is an invertible element of R. The coefficients are found recursively from the above formula for the coefficients of a composition, equating them with those of the composition identity X (that is 1 at degree 1 and 0 at every degree greater than 1) . In the case when the coefficient ring is a field of characteristic 0, the Lagrange inversion formula provides a powerful tool to compute the coefficients of g, as well as the coefficients of the (multiplicative) powers of g.
Formal differentiation of series
Given a formal power series
in R[[X]], we define its formal derivative, denoted Df or , by
The symbol D is called the formal differentiation operator. The motivation behind this definition is that it simply mimics term-by-term differentiation of a polynomial.
This operation is R-linear:
for any a, b in R and any f, g in R[[X]]. Additionally, the formal derivative has many of the properties of the usual derivative of calculus. For example, the product rule is valid:
and the chain rule works as well:
whenever the appropriate compositions of series are defined (see above under composition of series).
In a sense, all formal power series are Taylor series. Indeed, for the f defined above, we find that
where Dk denotes the kth formal derivative (that is, the result of formally differentiating k times).
Properties
Algebraic properties of the formal power series ring
R[[X]] is an associative algebra over R which contains the ring R[X] of polynomials over R; the polynomials correspond to the sequences which end in zeros.
The Jacobson radical of R[[X]] is the ideal generated by X and the Jacobson radical of R; this is implied by the element invertibility criterion discussed above.
The maximal ideals of R[[X]] all arise from those in R in the following manner: an ideal M of R[[X]] is maximal if and only if M ∩ R is a maximal ideal of R and M is generated as an ideal by X and M ∩ R.
Several algebraic properties of R are inherited by R[[X]]:
- if R is a local ring, then so is R[[X]]
- if R is Noetherian, then so is R[[X]]; this is a version of the Hilbert basis theorem
- if R is an integral domain, then so is R[[X]]
- if R = K is a field, then K[[X]] is a discrete valuation ring.
Topological properties of the formal power series ring
The metric space (R[[X]], d) is complete.
The ring R[[X]] is compact if and only if R is finite. This follows from Tychonoff's theorem and the characterisation of the topology on R[[X]] as a product topology.
Applications
Formal power series can be used to solve recurrences occurring in number theory and combinatorics. For an example involving finding a closed form expression for the Fibonacci numbers, see the article on Examples of generating functions.
One can use formal power series to prove several relations familiar from analysis in a purely algebraic setting. Consider for instance the following elements of Q[[X]]:
Then one can show that
and
as well as
(the latter being valid in the ring Q[[X,Y]]).
In algebra, the ring K[[X1, ..., Xr]] (where K is a field) is often used as the "standard, most general" complete local ring over K.
Interpreting formal power series as functions
In mathematical analysis, every convergent power series defines a function with values in the real or complex numbers. Formal power series can also be interpreted as functions, but one has to be careful with the domain and codomain. If f=∑an Xn is an element of R[[X]], S is a commutative associative algebra over R, I is an ideal in S such that the I-adic topology on S is complete, and x is an element of I, then we can define
This latter series is guaranteed to converge in S given the above assumptions on x. Furthermore, we have
and
Unlike in the case of bona fide functions, these formulas are not definitions but have to be proved.
Since the topology on R[[X]] is the (X)-adic topology and R[[X]] is complete, we can in particular apply power series to other power series, provided that the arguments don't have constant coefficients (so that they belong to the ideal (X)): f(0), f(X2−X) and f( (1 − X)−1 − 1) are all well defined for any formal power series f∈R[[X]].
With this formalism, we can give an explicit formula for the multiplicative inverse of a power series f whose constant coefficient a = f(0) is invertible in R:
If the formal power series g with g(0) = 0 is given implicitly by the equation
where f is a known power series with f(0) = 0, then the coefficients of g can be explicitly computed using the Lagrange inversion formula.
Generalizations
Formal Laurent series
A formal Laurent series over a ring R is defined in a similar way to a formal power series, except that we also allow finitely many terms of negative degree (this is different from the classical Laurent series), that is series of the form
where for all but finitely many negative indices n. Multiplication of such series can be defined. Indeed, similarly to the definition for formal power series, the coefficient of of two series with respective sequences of coefficients and is
which sum is effectively finite because of the assumed vanishing of coefficients at sufficiently negative indices, and which sum zero for sufficiently negative k for the same reason.
For a non-zero formal Laurent series, the minimal integer n such that an≠0 is called the order of f, denoted ord(f). (The order of the zero series is +∞.) The formal Laurent series form the ring of formal Laurent series over R, denoted by R((X)). It is equal to the localization of R[[X]] with respect to the set of positive powers of X. It is a topological ring with the metric .
If R = K is a field, then K((X)) is in fact a field, which may alternatively be obtained as the field of fractions of the integral domain K[[X]].
One may define formal differentiation for formal Laurent series in a natural way (term-by-term). Precisely, the formal derivative of the formal Laurent series f above is
which is again an element of K((X)). Notice that if f is a non-constant formal Laurent series, and K is a field of characteristic 0, then one has
However, in general this is not the case since the factor n for the lowest order term could be equal to 0 in R.
Formal residue
Assume that R is a field K of characteristic 0. Then the map
is a K-derivation that verifies
The latter shows that the coefficient of X−1 in ƒ is of particular interest; it is called formal residue of ƒ and denoted Res(ƒ). The map
is K-linear, and by the above observation one has an exact sequence
Some rules of calculus. As a quite direct consequence of the above definition, and of the rules of formal derivation, one has, for any ƒ and g in K((X))
- i.
- ii.
- iii.
- iv.
- v.
Property (i) is part of the exact sequence above. Property (ii) follows from (i) as applied to (ƒg)' = ƒg' + ƒ'g. Property (iii): any ƒ can be written in the form ƒ = xm g, with m = ord(ƒ) and ord(g) = 0: then ƒ'/ƒ = mX −1 + g'/g. Since ord(g) = 0, the element g is invertible in K[[X]] ⊂ im(D) = ker(Res), whence Res(ƒ'/ƒ) = m. Property (iv): Since ker(Res) ⊂ im(D), we can write ƒ = ƒ−1 X −1 + F' , with F ∈ K((X)). Consequently, (ƒ g) g' = f−1 g−1 g' + (F' g) g' = ƒ−1 g'/g + (F g)' and (iv) follows from (i) and (iii). Property (v) is clear from the definition.
The Lagrange inversion formula
As mentioned above, any formal series with and has a composition inverse . The following relation between the coefficients of and holds ("Lagrange inversion formula"):
In particular, for n = 1 and all k ≥ 1,
Since the proof of the Lagrange inversion formula is a very short computation, it is worth reporting it here. By the above rules of calculus,
Generalizations. One may observe that the above computation can be repeated plainly in more general settings than : a generalization of the Lagrange inversion formula is already available working in the -modules , where is a complex exponent. As a consequence, if f and g are as above, with , we can relate the complex powers of f/X and g/X: precisely, if and are non-zero complex numbers with negative integer sum, , then
- .
For instance, this way one finds the power series for complex powers of the Lambert function.
Power series in several variables
Formal power series in any number of indeterminates (even infinitely many) can be defined. If I is an index set and XI is the set of indeterminates Xi for i∈I, then a monomial Xα is any finite product of elements of XI (repetitions allowed); a formal power series in XI with coefficients in a ring R is determined by any mapping from the set of monomials Xα to a corresponding coefficient cα, and is denoted . The set of all such formal power series is denoted R[[XI]], and it is given a ring structure by defining
and
Topology
The topology on R[[XI]] is such that a sequence of its elements converges only if for each monomial Xα the corresponding coefficient stabilizes. This is the J-adic topology, where J is the ideal of R[[XI]] generated by all the indeterminates in XI.
As remarked above, the topology on a repeated formal power series ring like R[[X]][[Y]] is usually chosen in such a way that it becomes isomorphic as a topological ring to R[[X,Y]].
Operations
All of the operations defined for series in one variable may be extended to the several variables case.
- A series is invertible if and only if its constant term is invertible in R.
- The composition f(g(X)) of two series f and g is defined if f is a series in a single indeterminate, and the constant term of g is zero. For a series f in several indeterminates a form of "composition" can similarly be defined, with as many separate series in the place of g as there are indeterminates.
In the case of the formal derivative, there are now separate partial derivative operators, which differentiate with respect to each of the indeterminates. They all commute with each other.
Universal property
In the several variables case, the universal property characterizing R[[X1, ..., Xr]] becomes the following. If S is a commutative associative algebra over R, if I is an ideal of S such that the I-adic topology on S is complete, and if x1, ..., xr are elements of I, then there is a unique Φ : R[[X1, ..., Xn]] → S with the following properties:
- Φ is an R-algebra homomorphism
- Φ is continuous
- Φ(Xi) = xi for i = 1, ..., r.
Replacing the index set by an ordered abelian group
Suppose G is an ordered abelian group, meaning an abelian group with a total ordering "<" respecting the group's addition, so that a < b if and only if a + c < b + c for all c. Let I be a well-ordered subset of G, meaning I contains no infinite descending chain. Consider the set consisting of
for all such I, with ai in a commutative ring R, where we assume that for any index set, if all of the ai are zero then the sum is zero. Then R((G)) is the ring of formal power series on G; because of the condition that the indexing set be well-ordered the product is well-defined, and we of course assume that two elements which differ by zero are the same.
Various properties of R transfer to R((G)). If R is a field, then so is R((G)). If R is an ordered field, we can order R((G)) by setting any element to have the same sign as its leading coefficient, defined as the least element of the index set I associated to a non-zero coefficient. Finally if G is a divisible group and R is a real closed field, then R((G)) is a real closed field, and if R is algebraically closed, then so is R((G)).
This theory is due to Hans Hahn, who also showed that one obtains subfields when the number of (non-zero) terms is bounded by some fixed infinite cardinality.
Examples and related topics
- Bell series are used to study the properties of multiplicative arithmetic functions
Notes
- ^ Sec 0.313, I.S. Gradshteyn (И.С. Градштейн), I.M. Ryzhik (И.М. Рыжик); Alan Jeffrey, Daniel Zwillinger, editors. Table of Integrals, Series, and Products, seventh edition. Academic Press, 2007. ISBN 978-0-12-373637-6. Errata. (Several previous editions as well.)
- ^ Ivan Niven, "Formal Power Series", American Mathematical Monthly, volume 76, number 8, October 1969, pages 871–889.
References
- Nicolas Bourbaki: Algebra, IV, §4. Springer-Verlag 1988.