Jump to content

Full metal jacket (ammunition)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Yobot (talk | contribs) at 13:53, 30 November 2016 (→top: WP:CHECKWIKI error fixes using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

For the Stanley Kubrick film, see Full Metal Jacket.
An example of FMJ bullets in their usual shapes: pointed ("spitzer") loaded in the 7.62×39mm rifle and round-nosed loaded in the 7.62×25mm pistol cartridges.

A full metal jacket (FMJ) bullet is a small-arms projectile consisting of a soft core (often lead) encased in a shell of harder metal, such as gilding metal, cupronickel, or less commonly a steel alloy. In military nomenclature, it is often labeled ball ammunition.

The use of full metal jacketing in military ammunition came about because of the need for improved feeding characteristics in small arms using internal mechanical manipulation of the cartridge to chamber rounds as opposed to externally hand-reloading single-shot firearms. The harder gilding was less prone to deformation than softer exposed lead, which improved feeding. It is often thought that military use of FMJ ammunition was the result of The Hague Convention of 1899, Declaration III, prohibiting the use in international warfare of bullets that easily expand or flatten in the body, but this only addresses that projectiles must not be designed to flatten or expand, not that they be jacketed. Jacketed bullets had been in use since at least 1882.[1][2][3][4]

In general, a bullet jacket allows for higher muzzle velocities than bare lead without depositing significant amounts of metal in the bore. It also prevents damage to bores from steel or armor-piercing core materials. Historically, the first successful full metal jacket rifle bullets were invented by Col. Eduard Rubin of the Swiss Army in 1882.[5][6][7][8] Full metal jacket bullets were first used as standard ammunition in 1886, for the French Mle 1886 Lebel rifle.[citation needed]

Impact characteristics

By design, fully jacketed projectiles have less capacity to expand after contact with the target than a hollow-point projectile. While this can be an advantage, it can also be a disadvantage as an FMJ bullet may pierce completely through a target, leading to less severe wounding, and possibly failing to disable the target. Furthermore, a projectile that goes completely through a target can cause unintentional damage downrange of the target.

Cartridges with full metal jacket bullets

See also

References

  1. ^ (Huon,1988)
  2. ^ Swissrifles.com
  3. ^ Holt Bobinson "The model 1911 Schmidt Rubin: the other Switzer". Guns Magazine. FindArticles.com. 08 Jun, 2010. http://findarticles.com/p/articles/mi_m0BQY/is_11_54/ai_n28573712/
  4. ^ The Gun Digest Book of Firearms Assembly/Disassembly: Centerfire Rifles, Volume 4 by J. B. Wood. Published by Krause Publications, 2003. ISBN 978-0-87349-631-5
  5. ^ (Huon,1988)
  6. ^ Swissrifles.com
  7. ^ Holt Bobinson "The model 1911 Schmidt Rubin: the other Switzer". Guns Magazine. FindArticles.com. 08 Jun, 2010. http://findarticles.com/p/articles/mi_m0BQY/is_11_54/ai_n28573712/
  8. ^ The Gun Digest Book of Firearms Assembly/Disassembly: Centerfire Rifles, Volume 4 by J. B. Wood. Published by Krause Publications, 2003. ISBN 978-0-87349-631-5
  • Huon, Jean (1988). Military Rifle and Machine Gun Cartridges. Alexandria, Va.: Ironside International. ISBN 0-935554-05-X. OCLC 24498827.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Full_metal_jacket_(ammunition)&oldid=752292463"