Jump to content

Honda NSX (first generation)

Edit links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Cirilobeto (talk | contribs) at 22:16, 15 November 2016 (→1992 NSX-R (Japanese domestic market): Added reference about handling characteristics.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

This article is about the first generation Honda NSX produced between 1990 and 2005. For the model re-introduced in 2016, see Honda NSX (second generation).
First generation
Overview
ProductionAugust 1990 – November 30, 2005
AssemblyTakanezawa R&D Plant, Tochigi, Japan (1990–2004)
Suzuka R&D Plant, Suzuka, Japan (2004–2005)
DesignerKen Okuyama (1987)
Masato Nakano (1987)
Shigeru Uehara (1988)
Body and chassis
LayoutTransversely mounted mid-engine, rear-wheel drive
RelatedHonda HSC
Powertrain
Engine2,977 cc (181.7 cu in) C30A V6 270 bhp (201 kW; 274 PS), 210 lb⋅ft (280 N⋅m) 3,179 cc (194.0 cu in) C32B V6 290 bhp (216 kW; 294 PS), 224 lb⋅ft (304 N⋅m)[1]
Transmission4-speed automatic
5-speed manual
6-speed manual[1]
Dimensions
Wheelbase2,530 mm (99.6 in)
Length4,405 mm (173.4 in) (1991–1993)
4,425 mm (174.2 in) (1994–2005)
Width1,810 mm (71.3 in)
Height1,170 mm (46.1 in)
Curb weight(91–92) 3,010 lb (1,370 kg)

(93–94) 3,020 lb (1,370 kg)
(93--95 NSX-R) 2,712 lb (1,230 kg)
(95–96) 3,142 lb (1,425 kg)
(97-01) 3,164 lb (1,435 kg)
(02+) 3,153 lb (1,430 kg)

(02+ NSX-R) 2,800 lb (1,270kg)

The first generation Honda NSX, marketed in North America as the Acura NSX, is a 2-seater, mid-engined sports car that was manufactured by Honda in Japan from 1990 to 2005.

Development

In 1984, Honda commissioned the Italian car designer Pininfarina to design the HP-X (Honda Pininfarina eXperimental),[2] which had a mid-mounted C20A 2.0 L V6 configuration. After Honda committed to the project, management informed the engineers that the new car would have to be as fast as anything coming from Italy and Germany .[3] The HP-X concept car evolved into a prototype known as NS-X, which stood for "New", "Sportscar" "eXperimental".[4] The prototype and eventual production model—which was marketed as the NSX— were designed by a team led by Chief Designer, Masahito Nakano, and Executive Chief Engineer, Shigeru Uehara (who subsequently were placed in charge of the S2000 project).

The original performance target for Honda's new sportscar was the Ferrari 328, which was revised to the 348 as the design neared completion. Honda intended its sportscar to meet or exceed the performance of the Ferrari, while offering targeted reliability and a lower price. For this reason, the 2.0 L V6 of the HP-X was abandoned and replaced with a more powerful 3.0 L VTEC V6 engine.

The bodywork design had been specifically researched Uehara after studying the 360-degree visibility inside an F-16 fighter jet cockpit.[5] Thematically the F-16 came into play in the exterior design as well as establishing the conceptual goals of the NSX. In the F-16 and other high performance craft such as unlimited hydroplanes, open-wheel race cars, etc., the cockpit is located far forward on the body and in front of the power plant. This "cab-forward" layout was chosen early in the NSX's design to optimize visibility while the long tail design enhanced high speed directional stability.[6] The NSX was designed to showcase several Honda automotive technologies, many derived from its F1 motor-sports program.

The NSX was the first production car to feature an all-aluminium semi-monocoque unit body,[7] incorporating a revolutionary extruded aluminium alloy frame and suspension components. The use of aluminium saved nearly 200 kg in weight over the steel equivalent in the body alone, while the aluminium suspension arms saved an additional 20 kg (much of it unsprung weight); a suspension compliance pivot helped maintain wheel alignment changes at a near zero value throughout the suspension cycle.[8] Other notable features included an independent, 4-channel anti-lock brake system; titanium connecting rods in the engine to permit reliable high-rpm operation; an electric power steering system;[9] Honda's proprietary VTEC variable valve timing system and, in 1995, the first electronic throttle control fitted to a Honda.

With a robust motorsports division, Honda had significant development resources at its disposal and made extensive use of them. Respected Japanese Formula One driver Satoru Nakajima, for example, was involved with Honda in the NSX's early on track development at Suzuka race circuit, where he performed many endurance distance duties related to chassis tuning. Brazilian Formula One World Champion Ayrton Senna, for whom Honda had powered all three of his world championship-winning Formula One race cars before his death in 1994, was considered Honda's main innovator in convincing the company to stiffen the NSX chassis further after initially testing the car at Honda's Suzuka GP circuit in Japan. Senna further helped refine the original NSX's suspension tuning and handling spending a whole day test driving prototypes and reporting his findings to Honda engineers after each of the day's five testing sessions.[10] Senna also tested the NSX at the Nurburgring and other tracks.[11] The suspension development program was far-ranging and took place at the Tochigi Proving Grounds, the Suzuka circuit, the 179-turn Nurburgring Course in Germany, HPCC, and Hondas newest test track in Takasu, Hokkaido.[12] Honda automobile dealer Bobby Rahal (two-time CART PPG Cup and 1986 Indianapolis 500 champion) also participated in the car's development.[13]

Official launch and production

The production car made its first public appearances in 1989, at the Chicago Auto Show in February and at the Tokyo Motor Show in October of that year, to positive reviews. Honda revised the vehicle's name from NS-X to NSX before final production and sale. The NSX went on sale in Japan in 1990 at Honda Verno dealership sales channels, supplanting the Honda Prelude as the flagship model. The NSX was sold under Honda's flagship Acura luxury brand starting in November 1990 in North America and Hong Kong.

Japanese NSX Police Car (Tochigi Prefectural Police)

Upon its official release, the NSX design concept showcased Honda's technology, and measured only 1,170 mm (46 in) in height, making it only 141.3 mm (5.56 in) taller than the Ford GT40, an extreme GT racing car designed and funded solely to win at LeMans. The Japanese car maker's race track innovations and competitive history were further exemplified on the road by the NSX's ultra-rigid, ultra-light all aluminium monocoque chassis and front and rear double wishbone suspension, with forged control arms connected to forged alloy wheels. The car additionally boasted the world's first production car engine with titanium connecting rods, forged pistons, and ultra high-revving capabilities – the redline was at a lofty 8,000 rpm – all traits usually associated with track and race engineered motor cars. The NSX exterior had a dedicated 23-step paint process, including an aircraft type chromate coating designed for chemically protecting the aluminium bodywork and a waterborne paint for the base coat to achieve a clearer, more vivid top color and a smoother surface finish.

The car's chassis rigidity and cornering/handling capabilities were the results of Ayrton Senna's consulatation with NSX's chief engineers while testing the NSX prototype car at Honda's Suzuka Circuit during its final development.[13] The NSX was initially assembled at the purpose-built Takanezawa R&D Plant in Tochigi from 1989 to early 2004, when it was moved to Suzuka Plant for the remainder of its production life. The cars were assembled by approximately 200 of Honda's highest-skilled and most experienced personnel, a team of hand-picked staff with a minimum of ten years assembly experience employed from various other Honda facilities to run the NSX operation.[3] After studying their main competitors such as Ferrari, Lamborghini and Porsche, Honda engineers designed the NSX in search of the "perfect balance" between usable power and reliability and thus produced a powerful naturally aspirated VTEC engine suitable for the extreme demands of both road and track.

Honda NSX engine bay.

Production of the first generation NSX ended on November 30, 2005. Sales in the United States and Canada ended in 2000 and 2005, respectively.

As of the end of June 2005, the NSX achieved total worldwide sales of more than 18,000 units over 15 years.[14]

1992 NSX-R (Japanese domestic market)

NSX Type R

While the NSX always was intended to be a world-class sports car, engineers had made some compromises in order to strike a suitable balance between raw performance and daily driveability. For those NSX customers seeking a no-compromise racing experience, Honda decided in 1992 to produce a version of the NSX specifically modified for superior on-track performance at the expense of customary creature comforts. Thus, the NSX Type R (or NSX-R) was born. Honda chose to use its moniker of Type R to designate the NSX-R's race-oriented design.

Honda engineers started with a base NSX coupe and embarked on an aggressive program of weight reduction. Sound deadening, the audio system, spare tire, air conditioning system and traction control along with some of the electrical equipment was removed. The power leather seats were replaced with lightweight carbon-kevlar racing seats made by Recaro for Honda. However, electric windows and fore/aft electric seat adjusters were retained. The stock forged alloy wheels were replaced with lighter forged aluminium wheels produced by Enkei, which reduced the car's unsprung weight. The stock leather shift knob was replaced with a sculpted titanium piece. Overall, Honda managed to remove approximately 120 kg (265 lb) of weight, giving the NSX-R a final weight of 1,230 kg (2,712 lb).[15]

As found by journalists such as Car and Driver in their September 1997 issue's comparison of "Best Handling Car for more than $30K", the NSX, due to its mid-engine layout and rear-end link travel, was susceptible to a sudden oversteer condition during certain cornering maneuvers. While this condition rarely occurred during spirited street driving, it was much more prevalent on race tracks where speeds were much higher. To address the problem and improve the NSX-R's cornering stability at the limit, Honda added one aluminum bracket under the front battery tray and added one aluminum bracket in front of the front radiator to add more chassis rigidity then replaced the entire suspension with stiffer front sway bar, stiffer suspension bushings, stiffer coil springs and stiffer dampers.

The stock NSX has a somewhat rearward bias in its spring and bar rates, where the rear is relatively quite stiff versus the front. This means that the lateral load transfer distribution, or the amount of load that is transferred across the front axle versus the rear while cornering, is rather rear biased. This can make the car quite lively and easy to rotate at low speed, but in higher speed corners this effect becomes more pronounced and can be a handful to manage. To reduce the tendency to oversteer, Honda fitted softer rear tires on the NSX. For the NSX-R, Honda reversed the spring bias, placing stiffer springs on the front suspension along with stiffer front sway bar. This shifts the load transfer stiffness balance farther forward, resulting in more rear grip at the expense of front grip; this has the effect of decreasing the oversteer tendency of the car, making it much more stable in high speed corners. Overall, the NSX-R uses much stiffer front sway bar along with stiffer springs than the stock NSX (21.0mm xt2.6mm front sway bar :F 3.0 kg/mm—R 4.0 kg/mm for the NSX versus F 8.0 kg/mm—R 5.7 kg/mm for the NSX-R).

Honda also increased the final drive ratio to a 4.235:1 ring and pinion gear in place of the 4.06:1 stock unit, which moved the NSX-R's shift point speeds closer together. This change improved acceleration at the expense of top speed, and a higher (percentage) locking limited-slip differential was installed. Also, the NSX-R 3.0 liter DOHC VTEC V-6 engine had a blueprinted and balanced crankshaft assembly which is exactly the same labour-intensive high precision process done for Honda racing car engines built by highly qualified engine technicians.

The lightest of all NSX variants at 1,230 kg (2,712 lb), the First-Gen NSX-R is capable of blistering track performance, though the ride can be jarring and noisy due to the stiff suspension bushings, stiff spring rates and lack of sound insulation.[16]

Beginning in late November 1992, Honda produced a limited number of 483 NSX-R variants exclusively for the Japanese domestic market (JDM). Factory optional items as air conditioning, Bose stereo system, Carbon fiber trim center console with Carbon fiber door trim and starting in 1994 Championship White painted larger wheels (16" front wheels and 17" rear wheels) were available for a hefty premium. Production ended in September 1995.

1995 NSX-T

Beginning in 1995, the NSX-T with a removable targa top was introduced in Japan as a special order option and in North America in March 1995.[17] The NSX-T replaced the standard coupe entirely in North America as the only version available post 1994 and all NSXs thereafter were in targa form with the notable exceptions of the Zanardi Special Edition NSX in 1999 and a handful of special order post-1997/pre-2002 3.2-litre coupes. The European market continued to offer both body styles. The removable roof resulted in decreased chassis rigidity and Honda added about 100 pounds (45 kg) of structural reinforcements to compensate, including significantly thicker frame sidesill rocker panels (the body component which contributes most to the chassis's rigidity[18]), bulkheads, roof pillars and the addition of new front/rear bulkhead and floorpan crossmembers. The targa models, produced for the rest of the NSX's production run thru 2005, sacrificed weight and some of the original coupe's chassis rigidity in return for an open cockpit driving experience. In addition to this major change, all subsequent NSX-Ts (1995–2001) had smaller-diameter front sway bars, slightly stiffer front springs, softer rear springs and firmer shock-dampers[19] to improve ride comfort and tire wear while reducing the tendency towards oversteer common in mid-engined vehicles. All roofs post 1995 were now body-coloured instead of black, although in Japan, the two-tone black roof/body colour was still available as an optional feature. A lighter version of the variable ratio electric assisted power steering rack, previously found exclusively in the automatic transmission equipped NSXs, became standard on all models. Starting in 1995 the 5-speed transmission's second gear ratio was lowered by 4.2% to improve driveability and provide better response and automatic transmissions received an optional Formula One-inspired Sport Shift with a unique steering column mounted electronic shifter. Manual transmission cars received an improved Torque Reactive limited-slip differential – when combined with a new Throttle-By-Wire system, increased corner exit speeds by 10%. Other innovations beginning in 1995 included a new and lighter exhaust and muffler configuration for greater efficiency and lower emissions, an OBD-II onboard diagnostic system, improvements in the Traction Control System (TCS) and newly developed fuel injectors.

1997 performance upgrades

In 1997, Honda introduced the NSX's biggest performance upgrades for all its worldwide markets. Engine displacement increased from 3.0 L to 3.2 L[20] using a thinner fiber-reinforced metal (FRM) cylinder liner. The exhaust manifold was reconfigured and made of stainless steel header pipes rather than a cast-iron manifold for improved performance and lighter weight. The increased flow from this new configuration was a key contributor to the 20 additional horsepower drawn from the new engine. This revised 3.2 L C32B engine gave it slightly more rated power: from 274 PS (202 kW; 270 hp) to 294 PS (216 kW; 290 hp) while torque increased from 285 N⋅m (210 lb⋅ft) to 305 N⋅m (225 lb⋅ft) (manual transmission only). The net result increased the horsepower to weight ratio of the NSX by 7%. The 4-speed automatic model retained its 3.0 L engine and 252 hp power output. Another big change was the adoption of a 6-speed manual transmission with closer gear ratios and the addition of 3rd to 4th gear dual cone synchronizers. To handle the new engine's added torque and power the small diameter twin-disc clutch system of the 5-speed was replaced by a dual-mass low-inertia single disc clutch system. To offset the weight increase of the new 6-speed transmission and larger brake rotors, which were upped from 11.1 in (280 mm) to 11.732 inches (298 mm), key body parts were made with a new aluminum alloy that was up to 50% stronger allowing thinner lighter material to be used in the doors, fenders, and front and rear deck lids without any sacrifice of strength. Using this hi-strength alloy the net curb weight increase, despite adding many improvements, was only 22 lbs. Other notable changes included a keyless entry system and vehicle immobilizer system. The combination of slightly increased power and torque and a 6-speed gearbox, with ratios optimized to improve straight-line acceleration, produced better performance numbers over previous models than the modest increases would suggest. Motor Trend[21] and Road and Track (Feb 97) tests of 3.2L 6-speed equipped NSX-T (Targa) roofed cars produced 0–60 mph times of 4.8 and 5.0 seconds and quarter-mile times of 13.3s and 13.5s respectively.[22] 0–60 mph times dropped to as low as 4.5 seconds using a 3.2L hard top coupe model as recorded by Car and Driver in their August 1998 0–150–0 issue. That NSX proved to be the fastest ever tested in North America. When Car and Driver tested the 1999 Zanardi special edition coupe a year later it produced a 4.8s 0–60 and a 13.2s quarter-mile. Although magazine tests for the 02+ models were rare Honda apparently kept improving the engine as Sports and Exotic Car magazine did a farewell article on a 2005 NSX-T and recorded a 0–60 time of 4.7s and a 13.1s quarter-mile.

1997 NSX-S and S-Zero (JDM)

NSX Type S

Along with the engine displacement increase in 1997, Japan exclusively received the NSX Type S (NSX-S) and NSX Type S-Zero (NSX-S-Zero), weighing in at 1,320 kg (2,910 lb) and 1,270 kg (2,800 lb) respectively. Both came with a Titanium Shift Knob, MOMO steering wheel, BBS lightweight aluminum wheels, Recaro full bucket carbon-kevlar alcantara/leather seats, mesh design engine cover (like the Type R) and a colored roof. Both had a stiffer suspension than the normal NSX.

The S-Zero is a more circuit-oriented version of the standard Type S. The suspension is even stiffer by using the NA1 Type R (1992 to 1995) suspension but retaining the Type S's larger rear sway bar. Unlike the standard Type S, the S-Zero did not offer cruise control, stereo, power door locks, airbags, air conditioning, traction control, power steering, fog lights or a navigation system. Honda came up with a new lightweight lead-acid battery and halved the thickness of the partition glass between engine bay and cabin to reduce even more weight. Changes were also made to the interior's manual transmission boot shifter, replacing the original material from leather to mesh. Much of the sound deadening material was also removed to reduce weight. Making the S-Zero 50 kg (110 lb) lighter than the Type S.

1999 NSX "Alex Zanardi" edition (USA)

Produced exclusively for the United States, the Alex Zanardi Edition NSX was introduced in 1999 to commemorate Alex Zanardi's two back-to-back CART Champ Car championship wins for Honda / Acura in 1997 and 1998. Only fifty-one examples were built, and they were available only in New Formula Red to reflect the color of the Champ Car Zanardi drove for Chip Ganassi Racing.

The Zanardi Edition was similar to the Japanese market NSX Type S. Visible differences between the Zanardi Edition and the Type S were the Zanardi's left-hand drive, black leather and suede seats with red stitching, airbag-equipped Acura steering wheel, and a brushed-aluminium plaque with an engraved Acura logo, Zanardi's signature, and a serial number on the rear bulkhead. Total vehicle weight is reduced 149 pounds (68 kg) compared to the NSX-T, through the use of a fixed hard-top roof, lighter rear spoiler, single pane rear glass, lightweight BBS alloy wheels, a lighter battery, and a manual rack-and-pinion steering system in place of the electric power steering.

Zanardi Number 0 was a press car that also appeared in auto shows across the country. In a handling test in Road & Track's June 1999 issue, this Zanardi NSX placed second against the Dodge Viper GTS-R, Lotus Esprit, Porsche 911 Carrera 4, Ferrari F355 Spider, and Chevrolet Corvette C5 Coupe. The car was also featured in Car and Driver's July 1999 issue before being sold to a private individual.[citation needed]

Zanardi Number 1 belongs to Zanardi himself and was not given a North American VIN. The car is rumored to have been modified by Honda with hand-activated throttle, braking, and shifting mechanisms to accommodate Zanardi's loss of both legs resulting from his Lausitzring crash in 2001.[citation needed]

Zanardi numbers 2 through 50 were sold to the general public through dealers.

2002 NSX facelift

NSX Facelift

The original NSX body design received only minor modifications from Honda in the new millennium when in December 2001 the original pop-up headlamps were replaced with fixed xenon HID headlamp units, along with slightly wider rear tires to complement a revised suspension. Front spring rates were increased from 3.2 kg/m to 3.5 kg/m, rear spring rates were increased from 3.8 kg/m to 4.0 kg/m and the diameter of the rear stabilizer bar increased from 17.5 mm to 19.1 mm with a 2.3 mm wall thickness.

The fixed roof NSX was dropped in 2002 (North America). The NSX was now made available in a number of exterior colors with either a matching or black interior to provide a number of possible color combinations. A 4-speed automatic transmission with manual-type shift option also became available.

NSX-R (JDM) facelift

A second iteration of the NSX-R was released in 2002, again exclusively in Japan. As with the first NSX-R, weight reduction was the primary focus for performance enhancement. The chassis is based on the fixed-roof coupe, due to its lighter weight and more rigid construction. Carbon fiber was used to a large extent throughout the body components to reduce weight, including a larger, more aggressive rear spoiler, vented hood and deck lid. The vented hood was said to be the largest one-piece carbon-fiber hood in production cars. Additionally, the original NSX-R weight reduction techniques were repeated, including deletion of the audio system, sound insulation and air conditioning. Furthermore, the power steering was removed. A single-pane rear divider was again used, as were Recaro carbon-kevlar racing seats. Finally, larger yet lighter wheels resulted in a total weight reduction of almost 100 kg (220 lb) to 1,270 kg (2,800 lb).[23]

The 3.2L DOHC V6 engine received special attention as well. Each NSX-R engine was hand assembled by a skilled technician using techniques normally reserved for racing programs. Components of the rotating assembly (pistons, rods and crank) were precision weighed and matched so that all components fell within a very small tolerance of weight differential. Then, the entire rotating assembly was balanced to a level of accuracy ten times that of a typical NSX engine. This balancing and blueprinting process significantly reduced parasitic loss of power due to inertial imbalance, resulting in a more powerful, free-revving powerplant with excellent throttle response.[24] Officially, Honda maintains that the power output of the Second-Gen NSX-R engine is 290 bhp (220 kW), which is identical to the stock NSX. The automotive press, however, has long speculated that the true output of the engine is higher.

Creating the impression of increased power the accelerator was remapped, becoming much more sensitive to movement, particularly at the beginning of the pedal's new shorter stroke.[25] This, coupled with the harsh suspension, makes it very hard for the driver to drive smoothly at low speeds on streets with even slight bumps. The lack of power steering has also been noted by drivers as making the car tiring and hard to steer at low speed.[26]

The result of Honda's second NSX-R effort was a vehicle that could challenge the latest sports car models on the track, despite having a base design that was more than 15 years old. For example, noted Japanese race and test driver Motoharu Kurosawa piloted a 2002 NSX-R around the Nurburgring road course in 7:56, a time equal to a Ferrari F360 Challenge Stradale.[27] The NSX-R accomplished this feat despite being out-powered by the Ferrari by over 100 bhp (75 kW).

NSX-R GT (JDM)

After the release of the facelifted NSX-R, Honda developed a more agile, more responsive, and quicker limited edition NSX-R called the NSX-R GT. The NSX-R GT was created by Honda solely to comply with the Super GT production-based race car homologation requirements. As JGTC rules required at least five production cars for any race car version to compete, the NSX-R GT was limited to a production run of only five cars.

The differences between the Second-Gen NSX-R and the NSX-R GT are not fully known. One clear difference is the addition of a non-functional snorkel attached to the roof of the car. In the JGTC NSX race cars however, this snorkel is fully functional, feeding outside air to an individual throttle body intake plenum. The NSX-R GT also has a lowered suspension and widened body. More aggressive aerodynamic components such as an extended front spoiler lip and large rear diffuser are used as well. It also is speculated that the NSX-R GT incorporates more weight savings over the NSX-R. Honda never advertised what, if any, changes were made to the 3.2L DOHC V6 for the NSX-R GT.

NSX-S (JDM) facelift

The second iteration NSX-S, sold exclusively in Japan like other sports NSXs, continues with the face-lifted NSX keeping the weight at 1,320 kg (2,910 lb).

2008 NSX Mugen RR concept

At the 2008 Tokyo Auto Salon, Honda unveiled a Honda NSX Mugen RR concept vehicle, which included 255/35R18 and 335/30R18 tires, widened front, multi-grooved rear diffuser, adjustable rear wing.[28] The Mugen NSX RR concept is powered by a modified 3.2L V6, and has had its mounting changed from transverse to longitudinal. The change in mounting position, done in-house at Mugen's facility via custom mounts, subframe, transmission, and other key components, allows for better power transfer to the rear wheels, and for a better exhaust flow that goes straight out the rear of the car rather than under the engine and then out.

Motorsport

Safety car

Since the beginning of the NSX's production, the car has been used as a safety car at the Suzuka Circuit, even for the Japanese Grand Prix in its early years of production, and is still used at the circuit. The car is also used for the same role at Twin Ring Motegi, the other circuit owned by Honda.

24 Hours of Le Mans

The 1995 class-winner "Team Kunimitsu" NSX-GT2

The NSX made three appearances at the 24 Hours of Le Mans, in 1994, 1995, and 1996.

Three Honda NSXs were entered in the 1994 24 Hours of Le Mans. Cars numbers 46, 47 and 48 were prepared and run by team Kremer Racing Honda, with Team Kunimitsu assisting and driving the number 47 car. All were in the GT2 class, and all completed the race, but placed 14th, 16th and 18th.[29]

Three Honda NSXs were entered in the 1995 24 Hours of Le Mans. Honda's factory team brought two turbocharged NSXs which were entered in the GT1 class numbered 46 and 47. Team Kunimitsu Honda prepared and entered a naturally aspirated NSX into the GT2 class numbered 84. Car 46 finished but was not classified for failing to complete 70% of the distance of the race winner. Car 47 did not finish due to clutch and gearbox failure. Car 84, driven by Keiichi Tsuchiya, Akira Iida, and Kunimitsu Takahashi, finished first in the GT2 class and 8th overall after completing 275 laps. This NSX was featured in the original Gran Turismo.[30]

For the 1996 24 Hours of Le Mans, only the Team Kunimitsu Honda NSX returned with the same drivers. It completed 305 laps to finish in the 16th position overall, and third in the GT2 class.[31]

Super GT

For use in the Super GT (formerly the JGTC), the NSX has been highly modified (as allowed by series technical regulations) with chassis development by Dome, engine development by Mugen, for Honda.

Externally the NSX shape has developed race by race, season to season to the demands of increasing aerodynamic downforce within the regulations. The most notable change is the position of the V6 engine, which is mounted longitudinally instead of transversely as per the roadcar. Similar to the setup used in modern Lamborghinis, the gearbox is located in the center tunnel under the cockpit and is connected to the rear differential by a driveshaft. Engines can either be turbocharged or naturally aspirated, depending on the class and on the rules.

Prior to rule changes beginning in the 2003 season, the Super GT/GT500 NSX was powered by a specially modified version of the C32B V6 engine. Using a stroker crankshaft from Toda Racing, the naturally aspirated engine displaced 3.5 liters and produced nearly 500 bhp. Beginning in 2003, Honda substituted a highly modified C30A, augmented by a turbocharger, which also produces up to 500 bhp.

The NSX continued to be used as the works Honda car in the GT500 class, even though it is no longer in production, until it was replaced in 2010 with the HSV-010. New 2014 regulations however will render the HSV-010 obsolete; Honda's 2014-spec GT500 car is to be based on the 2015 NSX, along with plans for a GTE version from 2015 onwards.

NSX competition vehicle during Super GT competition

Cars were entered by Raybrig and ARTA in the 2005 Super GT season, Castrol Mugen Motorsports in 2000, Loctite in 2001 and Epson in the 2007 Super GT season.

Honda NSX Super GT specifications

Year 2009 final specification

  • Chassis: Carbon fiber reinforced aluminium frame, steel Roll cage, JAF (Japan Automobile Federation) approval.
  • Engine: Custom-built Honda engine, water-cooled V6 Normally aspirated (Longitudial-mounted), 3.494 liters, DOHC, 4-valves per cylinder.
  • Speed: 191 mph (307 km/h)
  • Fuel: Unleaded 100 RON gasoline.
  • Lubrication: Mobil 1, BP, MOTUL, Elf.
  • Fuel delivery: Fuel injection.
  • Wheelbase: 2,530 mm.

World Challenge

The NSX was entered in the SCCA World Challenge prior to the redesign in 2002.

References

  1. ^ a b "2002 Acura NSX Specs". JB car pages.
  2. ^ "Honda HP-X". History and Models – Pininfarina Models. Pininfarina. Retrieved 2007-09-05.
  3. ^ a b "Autofile Honda NSX: Supercar choice of Superman Senna". Auto Express (124). Auto Express. February 12–18, 1991.
  4. ^ "The NSX". Honda. Retrieved January 13, 2015.
  5. ^ "Honda Worldwide | July 12, 2005 "Honda to Discontinue Production of the NSX Sports Car"". World.honda.com. July 12, 2005. Retrieved 2010-10-03.
  6. ^ pg.12, NSX Technical Information and Development History-Honda Motor Corp
  7. ^ "Light-Artikel: Leichtbau-Material Aluminium". Auto Motor u. Sport. Heft 24 1991: Seite 100–103. November 15, 1991.
  8. ^ Constantine (コスタス) (May 6, 2009). "Gordon Murray talks about the NSX". Hondamotorco.blogspot.com. Retrieved 2010-10-03.
  9. ^ "NSX Electric Power Steering". Nsxprime.com. July 31, 2000. Retrieved 2010-10-03.
  10. ^ Andrew Frankel,Hondas NSX Shows Why Ayrton was the Greatest-Sunday Times UK Article-September 1, 2002
  11. ^ Honda Motor Co. NSX Introduction Video
  12. ^ pg14,NSX Technical Information and Development History-Honda Motor Corp
  13. ^ a b St. Antoine,Arthur. "The Asphalt Jungle: Ayrton's Car." Motor Trend.
  14. ^ "Honda Worldwide – July 12, 2005 "Honda to Discontinue Production of the NSX Sports Car"". honda.com.
  15. ^ Yamaguchi,Jack; Road&Track Magazine, February 1993, Ampersand "Honda calls a new tune for a special NSX" p28-29
  16. ^ Frere,Paul; Road&Track Magazine, April 1994, First Drive "Acura NSX-R Ringside with light heavyweight" p32-33
  17. ^ "Acura NSX-T Open-Top Makes World Debut." PR Newswire, 1995.
  18. ^ NSX Technical Information and Development History-Pg 16,Honda Motor Corp
  19. ^ NSX Wiki: Suspension Tech Session by Don Erb, Comptech USA
  20. ^ Acura NSX V6-3.2L DOHC (VTEC) (1997).NSX V6-3.2L DOHC (VTEC) (1997) Workshop Manual.
  21. ^ "1997 Acura NSX-T". Motor Trend Magazine. May 1, 1997.
  22. ^ "NSX Performance". NSX Prime.
  23. ^ http://world.honda.com/NSX
  24. ^ http://world.honda.com/NSX/technology/t5.html
  25. ^ Gable, Chris. "Honda wings it for new NSX-R". Drive.com.au. Fairfax Media. Retrieved February 3, 2012.
  26. ^ Ward, Gavin. "Honda NSX-R". evo Magazine, August 2002. Dennis Publishing Limited. Retrieved February 3, 2012.
  27. ^ Best Motoring, August 2002
  28. ^ "Mugen Displays Honda NSX RR Commemorative Concept at 2009 Tokyo Auto Salon". Wot.motortrend.com. January 13, 2009. Retrieved 2010-10-03.
  29. ^ 24 Hours of LeMans, 1994.
  30. ^ 24 Hours of LeMans, 1995.
  31. ^ 24 Hours of LeMans, 1996.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Honda_NSX_(first_generation)&oldid=749734605"