Jump to content

MLW RSC-14

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DePiep (talk | contribs) at 16:40, 22 January 2016. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

MLW RSC-14
Type and origin
Power typeDiesel-electric
BuilderMontreal Locomotive Works
RebuilderCanadian National Railway
Rebuild date1975–1976
Number rebuilt38
Specifications
Configuration:
 • AARA1A-A1A
 • UIC(A1A)(A1A)
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Adhesive weight160,000 lb (73,000 kg; 73 t)
Loco weight240,000 lb (110,000 kg; 110 t)
Prime moverALCO 251B
RPM range1000 (max)
Engine typeV12 Four-stroke diesel
Displacement8,016 cu in (131.36 L)
GeneratorDC generator
Traction motors4 DC traction motors
Cylinders12
Cylinder size9 in × 10.5 in (229 mm × 267 mm)
TransmissionElectric
Performance figures
Maximum speed65 mph (105 km/h)
Power output1,400 hp (1,040 kW)
Tractive effortContinuous: 30,000 lbf (133.4 kN)
Career
OperatorsCanadian National Railways
ClassMR-14b and MR-14c
Numbers1750–1787

The MLW RSC-14 was a diesel-electric locomotive rebuilt by Canadian National Railway from locomotives originally supplied by Montreal Locomotive Works.

These locomotives began life as MLW RS-18s for the Canadian National Railway (CN). The base RS-18 model was derived by MLW from the ALCO-produced RS-11 model, and was equipped with a 12-cylinder four-cycle model 251B diesel engine rated at 1,800 horsepower (1,300 kW). This engine turned a General Electric (of Peterborough, Ontario) DC generator feeding four traction motors - one per axle on two bogies. Many RS-18s were equipped with so-called "light" trucks (made by Dofasco and others) in deference to light rail on Canadian branchlines. RS-18s were owned by Canadian Pacific as well as Canadian National and many other Canadian railways, and continued in service on major railroads into the 1990s. They continue in branchline and secondary service throughout North America today (April 2009).

Using the RS-18 as a starting point, the RSC-14 was created in the mid-1970s to meet CN's requirement for A1A-A1A trucked locomotives for light rural branchline service, particularly in the Maritimes.

CN retired its older A1A-A1A configured MLW RSC-13 and MLW RSC-24 models in the mid-1970s and rebuilt several dozen RS-18s using the A1A trucks from the scrapped RSC-13 and RSC-24 units. The horsepower rating for the locomotives was lowered from 1,800 hp (1,340 kW) on the RS-18 to 1,400 hp (1,040 kW), thus the new designation "RSC-14".

The locomotives saw extensive use on Prince Edward Island (see Prince Edward Island Railway), and on branch lines in New Brunswick and Nova Scotia. Most were retired or sold by the mid-1990s.

There are only two of these locomotives left in Canada:

See also