Pitcairn PCA-2

From Wikipedia, the free encyclopedia
  (Redirected from Pitcairn PCA-3)
Jump to: navigation, search
Pitcairn Autogiro NASA GPN-2000-001990.jpg
Role Utility autogyro
National origin United States
Manufacturer Pitcairn-Cierva Autogiro Company
Designer Harold F. Pitcairn
First flight 1931
Number built 20–30
Variants Pitcairn OP

The Pitcairn PCA-2 was an autogyro developed in the United States in the early 1930s.[1] i t was Harold F. Pitcairn's first autogyro design to sell in quantity. It had a conventional design for its day – an airplane-like fuselage with two open cockpits in tandem, and an engine mounted tractor-fashion in the nose.[2] The lift by the four-blade main rotor was augmented by stubby, low-set monoplane wings that also carried the control surfaces.[2] The wingtips featured considerable dihedral that acted as winglets for added stability.[2]

Operational history[edit]

The PCA-2 was the first rotary-wing aircraft to achieve type certification in the United States[3] and was used in a number of high-profile activities including a landing on the White House lawn[4][5] and the first flight across the United States in a rotorcraft. This latter feat was attempted by Amelia Earhart, flying for the Beech-Nut food company, but was actually accomplished by John M. Miller who completed his flight nine days before Earhart on 28 May 1931, in his PCA-2 named Missing Link.[6] Learning of Miller's achievement upon her arrival in California, Earhart set out to turn her flight into a round-trip record by flying east again, but abandoned the attempt after three crashes.[6] Earhart set an altitude record in a PCA-2 on 8 April 1931 with a height of 18,415 ft (5,615 m).[2][3][4] This record was broken in another PCA-2 by Lewis Yancey who flew to 21,500 ft (6,600 m) on 25 September 1932.[3][7]

PCA-2 operated by the Detroit News, displayed at the Henry Ford Museum in Dearborn, MI.

In 1931, The Detroit News made history when it bought a PCA-2 for use as a news aircraft due to its ability to fly well at low altitude, land and take off from restricted spaces, and semi-hover for better camera shots. In May 1933, Scripps donated the autogyro to the Henry Ford Museum in Dearborn, Michigan.[8]

Pitcairn PCA-2 Miss Champion on display

The Champion spark plug company operated a PCA-2 as a promotional machine in 1931 and 1932 as Miss Champion.[4] It was flown over 6,500 miles in the 1931 Ford National Reliability Air Tour. This machine was restored to flying condition in 1982 by Steve Pitcairn, Harold's son.[4] In 2005, he donated it to the EAA AirVenture Museum.[4] Other PCA-2s are preserved at The Henry Ford[4][9] and the Canada Aviation Museum.[10]


Specifications (PCA-2)[edit]

Data from "Pitcairn PCA-2 Autogiro Specifications"

General characteristics

  • Crew: One pilot
  • Capacity: 2 passengers
  • Length: 23 ft 1 in (7.04 m)
  • Wingspan: 30 ft 0 in (9.14 m)
  • Main rotor diameter: 45 ft 0 in (13.72 m)
  • Main rotor area: 1,590 ft2 (147 m2)
  • Empty weight: 2,233 lb (1,015 kg)
  • Gross weight: 3,000 lb (1,363 kg)
  • Powerplant: 1 × Wright R-975-J6-9, 330 hp (250 kW)


  • Maximum speed: 120 mph (190 km/h)
  • Range: 290 miles (466,7 km)
  • Service ceiling: 15,000 ft (4,575 m)
  • Maximum glide ratio: 4.8[11]

See also[edit]

Related development
Aircraft of comparable role, configuration and era



  1. ^ Taylor 1989, p.735
  2. ^ a b c d e f g The Illustrated Encyclopedia of Aircraft, p.2739
  3. ^ a b c d e f "Pitcairn, A G A, Pitcairn-Cierva, Pitcairn-Larsen"
  4. ^ a b c d e f "Pitcairn PCA-2 Autogiro 'Miss Champion' – NC11609"
  5. ^ Charnov 2003b, p.3
  6. ^ a b Charnov 2003a
  7. ^ Charnov 2003b, p.6
  8. ^ Ford Richardson Bryan, Sarah Evans. Henry's attic: some fascinating gifts to Henry Ford and his museum. 
  9. ^ "The Planes: 1931 Pitcairn Autogiro"
  10. ^ "Pitcairn-Cierva PCA-2"
  11. ^ Duda, Holger; Insa Pruter (2012). "FLIGHT PERFORMANCE OF LIGHTWEIGHT GYROPLANES" (PDF). German Aerospace Center. p. 5. Retrieved 3 December 2012. 


External links[edit]