Polaroid type 55
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
| Type 55 | |
|---|---|
| Maker | Polaroid |
| Speed | 50/18° (pos) 35/16° (neg) |
| Type | B&W instant |
| Format | 4×5" |
| Application | General |
Polaroid Type 55 film is a black-and-white peel-apart Polaroid film that yields both a positive print and a negative image that can be used to create enlargements.
The film speed is given by the manufacturers as 50 ISO, however that applies only to the positive component. The negative is rated by Polaroid as 25 ISO[citation needed] though it is possible to rate the negative at 32 ISO).
After processing the film is peeled apart to reveal positive and negative images. To prevent fading and physical damage the positive image requires a protective coating (included in the box) while the negative requires a cleaning solution: Polaroid recommends an 18% Sodium-Sulfite solution but some users favour Kodak's Hypo-Clear works). Polaroid also recommends a hardening fixative to protect the negative from scratches as Type 55 negatives are thin compared to other 4x5" negatives, and the emulsion is extremely delicate.[citation needed]
These negatives are fine-grained, have a broad tonal range and are of extremely high resolution, on the order of 150 LP/mm,[citation needed] can create large prints and are suitable for contact printing, particularly involving Cyanotype and Van dyke brown to create 'blueprint' and 'sepia' prints respectively.
Polaroid Type 55 (like all Type 50 series film) requires a Polaroid Model 545 Film Packet Back. This is mounted onto the back of a camera, usually a large format 4x5 inch type, in place of a conventional film carrier. A self-contained waterproof transparent sleeve containing positive and negative film sheets and a small reservoir of reagent gel is inserted into the Packet Back, an exposure made and the Packet Back is removed. By flipping a lever and withdrawing the sleeve the gel is squeezed between the negative and positive emulsion layers. After the set time the layers can be peeled apart. some gel is retained at the edges, creating positive and negative images.
A consequence of the process is an impression of a frame on the unprotected negative. The result (a perfect negative surrounded by imperfect frame-like image on three sides, the forth showing an impression of connective mesh) creates a distinctive "Polaroid frame look" that became popular, so much so photographers who did not use large format cameras (or any kind of chemical process) graphically combine a conventional photographic image, however created, with a superimposed image of an original 'Polaroid frame' as a graphic effect.
In 2001 Polaroid filed for bankruptcy protection, and in February 2008 announced it would cease production of all instant film, filing for bankruptcy protection a second time.
In 2009 the business was sold, the new owners announcing instant film production would be licensed out to a smaller company. The chemicals needed to process Polaroid instant film had been stockpiled in case of this eventuality but the licensees announced their intention to redesign and manufacture film on a limited basis under the Polaroid brand that would be compatible with most Polaroid film cameras, using machinery left over from a liquidated factory in the Netherlands. In response, in November 2009, Polaroid announced its intention to relaunch the manufacture of Polaroid film cameras in 2010 on a limited basis, marketed to enthusiasts and contingent on the availability of the newly licensed film stock. Initial plans are to produce a black-and-white film to replace existing film stocks, followed by a color film.
Stocks of existing Polaroid Type 55 film are scheduled to expire in 2010.
New55project
A group called New55project, announced in November 2010:[1]
With the news that there are no plans to produce any more Polaroid Type 55 P/N film a small group of Massachusetts tinkerers are starting to make their own instant negative films and processes. The goal of the project is to produce a new, very high quality instant 4X5 and 8X10 negative material to replace the no-longer-in-production Polaroid Type 55 instant P/N film.
This group is in the product development phase, and has demonstrated its own positive/negative film system. The final product if offered for sale to the public will be able to produce an instant negative using certain conventional 4x5 (and possibly 8x10) black-and-white sheet films. As of May 2014, New55 film has been successfully crowd-funded on Kickstarter, with production due to begin in January 2015.[2]
References
- ^ "New55 FILM". New55project.blogspot.com. Retrieved 2016-01-01.
- ^ "New55 FILM by Bob Crowley — Kickstarter". Kickstarter.com. Retrieved 2016-01-01.
- Polaroid Corporation. "Polaroid T-55 Film Data Sheet" (PDF). Polaroid Corporation. Archived from the original (PDF) on March 23, 2012. Retrieved 22 April 2011.
{{cite web}}: Unknown parameter|deadurl=ignored (|url-status=suggested) (help) - "The Impossible Project". (Licensee of Polaroid film products). Retrieved 4 December 2009.