Jump to content

Red–black tree

From Wikipedia, the free encyclopedia
(Redirected from Red-black tree)
Red–black tree
TypeTree
Invented1978
Invented byLeonidas J. Guibas and Robert Sedgewick
Complexities in big O notation
Space complexity
Space
Time complexity
Function Amortized Worst Case
Search
Insert
Delete

In computer science, a red–black tree is a self-balancing binary search tree data structure noted for fast storage and retrieval of ordered information. The nodes in a red-black tree hold an extra "color" bit, often drawn as red and black, which help ensure that the tree is always approximately balanced.[1]

When the tree is modified, the new tree is rearranged and "repainted" to restore the coloring properties that constrain how unbalanced the tree can become in the worst case. The properties are designed such that this rearranging and recoloring can be performed efficiently.

The (re-)balancing is not perfect, but guarantees searching in time, where is the number of entries in the tree. The insert and delete operations, along with tree rearrangement and recoloring, also execute in time.[2][3]

Tracking the color of each node requires only one bit of information per node because there are only two colors (due to memory alignment present in some programming languages, the real memory consumption may differ). The tree does not contain any other data specific to it being a red–black tree, so its memory footprint is almost identical to that of a classic (uncolored) binary search tree. In some cases, the added bit of information can be stored at no added memory cost.

History

[edit]

In 1972, Rudolf Bayer[4] invented a data structure that was a special order-4 case of a B-tree. These trees maintained all paths from root to leaf with the same number of nodes, creating perfectly balanced trees. However, they were not binary search trees. Bayer called them a "symmetric binary B-tree" in his paper and later they became popular as 2–3–4 trees or even 2–3 trees.[5]

In a 1978 paper, "A Dichromatic Framework for Balanced Trees",[6] Leonidas J. Guibas and Robert Sedgewick derived the red–black tree from the symmetric binary B-tree.[7] The color "red" was chosen because it was the best-looking color produced by the color laser printer available to the authors while working at Xerox PARC.[8] Another response from Guibas states that it was because of the red and black pens available to them to draw the trees.[9]

In 1993, Arne Andersson introduced the idea of a right leaning tree to simplify insert and delete operations.[10]

In 1999, Chris Okasaki showed how to make the insert operation purely functional. Its balance function needed to take care of only 4 unbalanced cases and one default balanced case.[11]

The original algorithm used 8 unbalanced cases, but Cormen et al. (2001) reduced that to 6 unbalanced cases.[1] Sedgewick showed that the insert operation can be implemented in just 46 lines of Java code.[12][13] In 2008, Sedgewick proposed the left-leaning red–black tree, leveraging Andersson’s idea that simplified the insert and delete operations. Sedgewick originally allowed nodes whose two children are red, making his trees more like 2–3–4 trees, but later this restriction was added, making new trees more like 2–3 trees. Sedgewick implemented the insert algorithm in just 33 lines, significantly shortening his original 46 lines of code.[14][15]

Terminology

[edit]
Example of a red–black tree
Figure 1: ... with explicit NIL leaves
Figure 2: ... with implicit left and right docking points

A red–black tree is a special type of binary search tree, used in computer science to organize pieces of comparable data, such as text fragments or numbers (as e.g. the numbers in figures 1 and 2). The nodes carrying keys and/or data are frequently called "internal nodes", but to make this very specific they are also called non-NIL nodes in this article.

The leaf nodes of red–black trees (NIL in figure 1) do not contain keys or data. These "leaves" need not be explicit individuals in computer memory: a NULL pointer can—as in all binary tree data structures— encode the fact that there is no child node at this position in the (parent) node. Nevertheless, by their position in the tree, these objects are in relation to other nodes that is relevant to the RB-structure, it may have parent, sibling (i.e., the other child of the parent), uncle, even nephew node; and may be child—but never parent—of another node. It is not really necessary to attribute a "color" to these end-of-path objects, because the condition "is NIL or BLACK" is implied by the condition "is NIL" (see also this remark).

Figure 2 shows the conceptually same red–black tree without these NIL leaves. To arrive at the same notion of a path, one must notice that e.g., 3 paths run through the node 1, namely a path through 1left plus 2 added paths through 1right, namely the paths through 6left and 6right. This way, these ends of the paths are also docking points for new nodes to be inserted, fully equivalent to the NIL leaves of figure 1.

Instead, to save a marginal amount of execution time, these (possibly many) NIL leaves may be implemented as pointers to one unique (and black) sentinel node (instead of pointers of value NULL).

As a conclusion, the fact that a child does not exist (is not a true node, does not contain data) can in all occurrences be specified by the very same NULL pointer or as the very same pointer to a sentinel node. Throughout this article, either choice is called NIL node and has the constant value NIL.

The black depth of a node is defined as the number of black nodes from the root to that node (i.e. the number of black ancestors). The black height of a red–black tree is the number of black nodes in any path from the root to the leaves, which, by requirement 4, is constant (alternatively, it could be defined as the black depth of any leaf node).[16]: 154–165  The black height of a node is the black height of the subtree rooted by it. In this article, the black height of a NIL node shall be set to 0, because its subtree is empty as suggested by figure 2, and its tree height is also 0.

Properties

[edit]

In addition to the requirements imposed on a binary search tree the following must be satisfied by a red–black tree:[17]

  1. Every node is either red or black.
  2. All NIL nodes (figure 1) are considered black.
  3. A red node does not have a red child.
  4. Every path from a given node to any of its descendant NIL nodes goes through the same number of black nodes.
  5. (Conclusion) If a node N has exactly one child, it must be a red child, because if it were black, its NIL descendants would sit at a different black depth than N's NIL child, violating requirement 4.

Some authors, e.g. Cormen & al.,[17] claim "the root is black" as fifth requirement; but not Mehlhorn & Sanders[16] or Sedgewick & Wayne.[15]: 432–447  Since the root can always be changed from red to black, this rule has little effect on analysis. This article also omits it, because it slightly disturbs the recursive algorithms and proofs.

As an example, every perfect binary tree that consists only of black nodes is a red–black tree.

The read-only operations, such as search or tree traversal, do not affect any of the requirements. In contrast, the modifying operations insert and delete easily maintain requirements 1 and 2, but with respect to the other requirements some extra effort must be made, to avoid introducing a violation of requirement 3, called a red-violation, or of requirement 4, called a black-violation.

The requirements enforce a critical property of red–black trees: the path from the root to the farthest leaf is no more than twice as long as the path from the root to the nearest leaf. The result is that the tree is height-balanced. Since operations such as inserting, deleting, and finding values require worst-case time proportional to the height of the tree, this upper bound on the height allows red–black trees to be efficient in the worst case, namely logarithmic in the number of entries, i.e. , which is not the case for ordinary binary search trees. For a mathematical proof see section Proof of bounds.

Red–black trees, like all binary search trees, allow quite efficient sequential access (e.g. in-order traversal, that is: in the order Left–Root–Right) of their elements. But they support also asymptotically optimal direct access via a traversal from root to leaf, resulting in search time.

Analogy to 2–3–4 trees

[edit]
A 2-node maps to a single black node. A 3-node maps to a black node with a red child. A 4-node maps to a black node with two red children.
Figure 3: Similarities between 2–3–4 trees and red-black trees

Red–black trees are similar in structure to 2–3–4 trees, which are B-trees of order 4.[18] In 2–3–4 trees, each node can contain between 1 and 3 values and have between 2 and 4 children. These 2–3–4 nodes correspond to black node – red children groups in red-black trees, as shown in figure 3. It is not a 1-to-1 correspondence, because 3-nodes have two equivalent representations: the red child may lie either to the left or right. The left-leaning red-black tree variant makes this relationship exactly 1-to-1, by only allowing the left child representation. Since every 2–3–4 node has a corresponding black node, invariant 4 of red-black trees is equivalent to saying that the leaves of a 2–3–4 tree all lie at the same level.

Despite structural similarities, operations on red–black trees are more economical than B-trees. B-trees require management of vectors of variable length, whereas red-black trees are simply binary trees.[19]

[edit]

Red–black trees offer worst-case guarantees for insertion time, deletion time, and search time. Not only does this make them valuable in time-sensitive applications such as real-time applications, but it makes them valuable building blocks in other data structures that provide worst-case guarantees. For example, many data structures used in computational geometry are based on red–black trees, and the Completely Fair Scheduler and epoll system call of the Linux kernel use red–black trees.[20][21] The AVL tree is another structure supporting search, insertion, and removal. AVL trees can be colored red–black, and thus are a subset of red-black trees. The worst-case height of AVL is 0.720 times the worst-case height of red-black trees, so AVL trees are more rigidly balanced. The performance measurements of Ben Pfaff with realistic test cases in 79 runs find AVL to RB ratios between 0.677 and 1.077, median at 0.947, and geometric mean 0.910.[22] The performance of WAVL trees lie in between AVL trees and red-black trees.[citation needed]

Red–black trees are also particularly valuable in functional programming, where they are one of the most common persistent data structures, used to construct associative arrays and sets that can retain previous versions after mutations. The persistent version of red–black trees requires space for each insertion or deletion, in addition to time.

For every 2–3–4 tree, there are corresponding red–black trees with data elements in the same order. The insertion and deletion operations on 2–3–4 trees are also equivalent to color-flipping and rotations in red–black trees. This makes 2–3–4 trees an important tool for understanding the logic behind red–black trees, and this is why many introductory algorithm texts introduce 2–3–4 trees just before red–black trees, even though 2–3–4 trees are not often used in practice.

In 2008, Sedgewick introduced a simpler version of the red–black tree called the left-leaning red–black tree[23] by eliminating a previously unspecified degree of freedom in the implementation. The LLRB maintains an additional invariant that all red links must lean left except during inserts and deletes. Red–black trees can be made isometric to either 2–3 trees,[24] or 2–3–4 trees,[23] for any sequence of operations. The 2–3–4 tree isometry was described in 1978 by Sedgewick.[6] With 2–3–4 trees, the isometry is resolved by a "color flip," corresponding to a split, in which the red color of two children nodes leaves the children and moves to the parent node.

The original description of the tango tree, a type of tree optimised for fast searches, specifically uses red–black trees as part of its data structure.[25]

As of Java 8, the HashMap has been modified such that instead of using a LinkedList to store different elements with colliding hashcodes, a red–black tree is used. This results in the improvement of time complexity of searching such an element from to where is the number of elements with colliding hashcodes.[26]

Operations

[edit]

The read-only operations, such as search or tree traversal, on a red–black tree require no modification from those used for binary search trees, because every red–black tree is a special case of a simple binary search tree. However, the immediate result of an insertion or removal may violate the properties of a red–black tree, the restoration of which is called rebalancing so that red–black trees become self-balancing. It requires in the worst case a small number, in Big O notation, where is the number of objects in the tree, on average or amortized , a constant number,[27]: 310  [16]: 158  of color changes (which are very quick in practice); and no more than three tree rotations[28] (two for insertion).

If the example implementation below is not suitable, other implementations with explanations may be found in Ben Pfaff’s[29] annotated C library GNU libavl (v2.0.3 as of June 2019).

The details of the insert and removal operations will be demonstrated with example C++ code, which uses the type definitions, macros below, and the helper function for rotations:

// Basic type definitions:

enum color_t { BLACK, RED };

struct RBnode {     // node of red–black tree
  RBnode* parent;   // == NIL if root of the tree
  RBnode* child[2]; // == NIL if child is empty
    // The index is:
    //   LEFT  := 0, if (key < parent->key)
    //   RIGHT := 1, if (key > parent->key)
  enum color_t color;
  int key;
};

#define NIL   NULL // null pointer  or  pointer to sentinel node
#define LEFT  0
#define RIGHT 1
#define left  child[LEFT]
#define right child[RIGHT]

struct RBtree { // red–black tree
  RBnode* root; // == NIL if tree is empty
};

// Get the child direction (∈ { LEFT, RIGHT })
//   of the non-root non-NIL  RBnode* N:
#define childDir(N) ( N == (N->parent)->right ? RIGHT : LEFT )
Left rotation and
right rotation, animated.
RBnode* RotateDirRoot(
    RBtree* T,   // red–black tree
    RBnode* P,   // root of subtree (may be the root of T)
    int dir) {   // dir ∈ { LEFT, RIGHT }
  RBnode* G = P->parent;
  RBnode* S = P->child[1-dir];
  RBnode* C;
  assert(S != NIL); // pointer to true node required
  C = S->child[dir];
  P->child[1-dir] = C; if (C != NIL) C->parent = P;
  S->child[  dir] = P; P->parent = S;
  S->parent = G;
  if (G != NULL)
    G->child[ P == G->right ? RIGHT : LEFT ] = S;
  else
    T->root = S;
  return S; // new root of subtree
}

#define RotateDir(N,dir) RotateDirRoot(T,N,dir)
#define RotateLeft(N)    RotateDirRoot(T,N,LEFT)
#define RotateRight(N)   RotateDirRoot(T,N,RIGHT)

Notes to the sample code and diagrams of insertion and removal

[edit]

The proposal breaks down both, insertion and removal (not mentioning some very simple cases), into six constellations of nodes, edges and colors, which are called cases. The proposal contains for both, insertion and removal, exactly one case that advances one black level closer to the root and loops, the other five cases rebalance the tree of their own. The more complicated cases are pictured in a diagram.

  • symbolises a red node and a (non-NIL) black node (of black height ≥ 1), symbolises the color red or black of a non-NIL node, but the same color throughout the same diagram. NIL nodes are not represented in the diagrams.
  • The variable N denotes the current node, which is labeled N or N in the diagrams.
  • A diagram contains three columns and two to four actions. The left column shows the first iteration, the right column the higher iterations, the middle column shows the segmentation of a case into its different actions.[30]
  1. The action "entry" shows the constellation of nodes with their colors which defines a case and mostly violates some of the requirements.
    A blue border rings the current node N and the other nodes are labeled according to their relation to N.
  2. If a rotation is considered useful, this is pictured in the next action, which is labeled "rotation".
  3. If some recoloring is considered useful, this is pictured in the next action, which is labeled "color".[31]
  4. If there is still some need to repair, the cases make use of code of other cases and this after a reassignment of the current node N, which then again carries a blue ring and relative to which other nodes may have to be reassigned also. This action is labeled "reassign".
    For both, insert and delete, there is (exactly) one case which iterates one black level closer to the root; then the reassigned constellation satisfies the respective loop invariant.
  • A possibly numbered triangle with a black circle atop represents a red–black subtree (connected to its parent according to requirement 3) with a black height equal to the iteration level minus one, i.e. zero in the first iteration. Its root may be red or black.
    A possibly numbered triangle represents a red–black subtree with a black height one less, i.e. its parent has black height zero in the second iteration.

Remark
For simplicity, the sample code uses the disjunction:
U == NIL || U->color == BLACK // considered black
and the conjunction:
U != NIL && U->color == RED   // not considered black
Thereby, it must be kept in mind that both statements are not evaluated in total, if U == NIL. Then in both cases U->color is not touched (see Short-circuit evaluation).
(The comment considered black is in accordance with requirement 2.)
The related if-statements have to occur far less frequently if the proposal[30] is realised.

Insertion

[edit]

Insertion begins by placing the new (non-NIL) node, say N, at the position in the binary search tree of a NIL node whose in-order predecessor’s key compares less than the new node’s key, which in turn compares less than the key of its in-order successor. (Frequently, this positioning is the result of a search within the tree immediately preceding the insert operation and consists of a node P together with a direction dir with P->child[dir] == NIL.) The newly inserted node is temporarily colored red so that all paths contain the same number of black nodes as before. But if its parent, say P, is also red then this action introduces a red-violation.

void RBinsert1(
  RBtree* T,         // -> red–black tree
  struct RBnode* N,  // -> node to be inserted
  struct RBnode* P,  // -> parent node of N ( may be NULL )
  int dir)           // side ( LEFT or RIGHT ) of P where to insert N
{
  struct RBnode* G;  // -> parent node of P
  struct RBnode* U;  // -> uncle of N

  N->color = RED;
  N->left  = NIL;
  N->right = NIL;
  N->parent = P;
  if (P == NULL) {   // There is no parent
    T->root = N;     // N is the new root of the tree T.
    return; // insertion complete
  }
  P->child[dir] = N; // insert N as dir-child of P
  // start of the (do while)-loop:
  do {

The rebalancing loop of the insert operation has the following invariant:

  • The variable N, representing the current node N and initially the insertion node, is made the variable running through the loop.
  • N is (red) at the beginning of each iteration.
  • Requirement 3 is satisfied for all pairs node←parent with the possible exception NP when P is also red (a red-violation at N).
  • All other properties (including requirement 4) are satisfied throughout the tree.

Notes to the insert diagrams

[edit]
before case rota-
tion
assig-
nment
after next Δh
P G U x P G U x
I1
I2 N:=G ? ? 2
I3
I4
i I5 PN N:=P o I6 0
o I6 PG
Insertion: This synopsis shows in its before columns, that all
                possible cases[32] of constellations are covered.
  • In the diagrams, P is used for N’s parent, G for its grandparent, and U for its uncle. In the table a — sign indicates root.
  • The diagrams show the parent node P as the left child of its parent G even though it is possible for P to be on either side. The sample code covers both possibilities by means of the side variable dir.
  • The diagrams show the cases where P is red also, the red-violation.
  • The column x indicates the change in child direction, i.e. o (for "outer") means that P and N are both left or both right children, whereas i (for "inner") means that the child direction changes from P’s to N’s.
  • The column group before defines the case, whose name is given in the column case. Thereby possible values in cells left empty are ignored. So in case I2 the sample code covers both possibilities of child directions of N, although the corresponding diagram shows only one.
  • The rows in the synopsis are ordered such that the coverage of all possible RB cases is easily comprehensible.
  • The column rotation indicates whether a rotation contributes to the rebalancing.
  • The column assignment shows an assignment of N before entering a subsequent step. This possibly induces a reassignment of the other nodes P, G, U also.
  • If something has been changed by the case, this is shown in the column group after.
  • A ✓ sign in column next signifies that the rebalancing is complete with this step. If the column after determines exactly one case, this case is given as the subsequent one, otherwise there are question marks.
  • The loop is contained in the sections "Insert case I1" and "Insert case I2", where in case I2 the problem of rebalancing is escalated tree levels or 1 black level higher in the tree, in that the grandfather G becomes the new current node N. So it takes maximally steps of iteration to repair the tree (where is the height of the tree). Because the probability of escalation decreases exponentially with each step the total rebalancing cost is constant on average, indeed amortized constant.
  • From the body of the loop, case I1 exits by itself and there are exiting branches to cases I4, I6, I5 + I6, and I3.
  • Rotations occur in cases I6 and I5 + I6 – outside the loop. Therefore, at most two rotations occur in total.

Insert case I1

[edit]

The current node’s parent P is black, so requirement 3 holds. Requirement 4 holds also according to the loop invariant.

    if (P->color == BLACK) {
      // Case_I1 (P black):
      return; // insertion complete
    }
    // From now on P is red.
    if ((G = P->parent) == NULL) 
      goto Case_I4; // P red and root
    // else: P red and G!=NULL.
    dir = childDir(P); // the side of parent G on which node P is located
    U = G->child[1-dir]; // uncle
    if (U == NIL || U->color == BLACK) // considered black
      goto Case_I56; // P red && U black

Insert case I2

[edit]
first iteration
higher iteration
Insert case I2

If both the parent P and the uncle U are red, then both of them can be repainted black and the grandparent G becomes red for maintaining requirement 4. Since any path through the parent or uncle must pass through the grandparent, the number of black nodes on these paths has not changed. However, the grandparent G may now violate requirement 3, if it has a red parent. After relabeling G to N the loop invariant is fulfilled so that the rebalancing can be iterated on one black level (= 2 tree levels) higher.

    // Case_I2 (P+U red):
    P->color = BLACK;
    U->color = BLACK;
    G->color = RED;
    N = G; // new current node
    // iterate 1 black level higher
    //   (= 2 tree levels)
  } while ((P = N->parent) != NULL);
  // end of the (do while)-loop

Insert case I3

[edit]

Insert case I2 has been executed for times and the total height of the tree has increased by 1, now being The current node N is the (red) root of the tree, and all RB-properties are satisfied.

  // Leaving the (do while)-loop (after having fallen through from Case_I2).
  // Case_I3: N is the root and red.
  return; // insertion complete

Insert case I4

[edit]

The parent P is red and the root. Because N is also red, requirement 3 is violated. But after switching P’s color the tree is in RB-shape. The black height of the tree increases by 1.

Case_I4: // P is the root and red:
  P->color = BLACK;
  return; // insertion complete

Insert case I5

[edit]
first iteration
higher iteration
Insert case I5

The parent P is red but the uncle U is black. The ultimate goal is to rotate the parent node P to the grandparent position, but this will not work if N is an "inner" grandchild of G (i.e., if N is the left child of the right child of G or the right child of the left child of G). A dir-rotation at P switches the roles of the current node N and its parent P. The rotation adds paths through N (those in the subtree labeled 2, see diagram) and removes paths through P (those in the subtree labeled 4). But both P and N are red, so requirement 4 is preserved. Requirement 3 is restored in case 6.

Case_I56: // P red && U black:
  if (N == P->child[1-dir])
  { // Case_I5 (P red && U black && N inner grandchild of G):
    RotateDir(P,dir); // P is never the root
    N = P; // new current node
    P = G->child[dir]; // new parent of N
    // fall through to Case_I6
  }

Insert case I6

[edit]
first iteration
higher iteration
Insert case I6

The current node N is now certain to be an "outer" grandchild of G (left of left child or right of right child). Now (1-dir)-rotate at G, putting P in place of G and making P the parent of N and G. G is black and its former child P is red, since requirement 3 was violated. After switching the colors of P and G the resulting tree satisfies requirement 3. Requirement 4 also remains satisfied, since all paths that went through the black G now go through the black P.

  // Case_I6 (P red && U black && N outer grandchild of G):
  RotateDirRoot(T,G,1-dir); // G may be the root
  P->color = BLACK;
  G->color = RED;
  return; // insertion complete
} // end of RBinsert1

Because the algorithm transforms the input without using an auxiliary data structure and using only a small amount of extra storage space for auxiliary variables it is in-place.

Removal

[edit]

Simple cases

[edit]

- When the deleted node has 2 children (non-NIL), then we can swap its value with its in-order successor (the leftmost child of the right subtree), and then delete the successor instead. Since the successor is leftmost, it can only have a right child (non-NIL) or no child at all.

- When the deleted node has only 1 child (non-NIL). In this case, just replace the node with its child, and color it black.
The single child (non-NIL) must be red according to conclusion 5, and the deleted node must be black according to requirement 3.

- When the deleted node has no children (both NIL) and is the root, replace it with NIL. The tree is empty.

- When the deleted node has no children (both NIL), and is red, simply remove the leaf node.

- When the deleted node has no children (both NIL), and is black, deleting it will create an imbalance, and requires a fixup, as covered in the next section.

Removal of a black non-root leaf

[edit]

The complex case is when N is not the root, colored black and has no proper child (⇔ only NIL children). In the first iteration, N is replaced by NIL.

void RBdelete2(
  RBtree* T,         // -> red–black tree
  struct RBnode* N)  // -> node to be deleted
 {
  struct RBnode* P = N->parent;  // -> parent node of N
  byte dir;          // side of P on which N is located (∈ { LEFT, RIGHT })
  struct RBnode* S;  // -> sibling of N
  struct RBnode* C;  // -> close   nephew
  struct RBnode* D;  // -> distant nephew

  // P != NULL, since N is not the root.
  dir = childDir(N); // side of parent P on which the node N is located
  // Replace N at its parent P by NIL:
  P->child[dir] = NIL;
  goto Start_D;      // jump into the loop

  // start of the (do while)-loop:
  do {
    dir = childDir(N);   // side of parent P on which node N is located
Start_D:
    S = P->child[1-dir]; // sibling of N (has black height >= 1)
    D = S->child[1-dir]; // distant nephew
    C = S->child[  dir]; // close   nephew
    if (S->color == RED)
      goto Case_D3;                  // S red ===> P+C+D black
    // S is black:
    if (D != NIL && D->color == RED) // not considered black
      goto Case_D6;                  // D red && S black
    if (C != NIL && C->color == RED) // not considered black
      goto Case_D5;                  // C red && S+D black
    // Here both nephews are == NIL (first iteration) or black (later).
    if (P->color == RED)
      goto Case_D4;                  // P red && C+S+D black

The rebalancing loop of the delete operation has the following invariant:

  • At the beginning of each iteration the black height of N equals the iteration number minus one, which means that in the first iteration it is zero and that N is a true black node in higher iterations.
  • The number of black nodes on the paths through N is one less than before the deletion, whereas it is unchanged on all other paths, so that there is a black-violation at P if other paths exist.
  • All other properties (including requirement 3) are satisfied throughout the tree.

Notes to the delete diagrams

[edit]
before case rota-
tion
assig-
nment
after next Δh
P C S D P C S D
D1
D2 N:=P ? ? 1
D3 PS N:=N D6 0
D5 0
D4 0
D4
D5 CS N:=N D6 0
D6 PS
Deletion: This synopsis shows in its before columns, that all
                possible cases[32] of color constellations are covered.
  • In the diagrams below, P is used for N’s parent, S for the sibling of N, C (meaning close nephew) for S’s child in the same direction as N, and D (meaning distant nephew) for S’s other child (S cannot be a NIL node in the first iteration, because it must have black height one, which was the black height of N before its deletion, but C and D may be NIL nodes).
  • The diagrams show the current node N as the left child of its parent P even though it is possible for N to be on either side. The code samples cover both possibilities by means of the side variable dir.
  • At the beginning (in the first iteration) of removal, N is the NIL node replacing the node to be deleted. Because its location in parent’s node is the only thing of importance, it is symbolised by (meaning: the current node N is a NIL node and left child) in the left column of the delete diagrams. As the operation proceeds also proper nodes (of black height ≥ 1) may become current (see e.g. case D2).
  • By counting the black bullets ( and ) in a delete diagram it can be observed that the paths through N have one bullet less than the other paths. This means a black-violation at P—if it exists.
  • The color constellation in column group before defines the case, whose name is given in the column case. Thereby possible values in cells left empty are ignored.
  • The rows in the synopsis are ordered such that the coverage of all possible RB cases is easily comprehensible.
  • The column rotation indicates whether a rotation contributes to the rebalancing.
  • The column assignment shows an assignment of N before entering a subsequent iteration step. This possibly induces a reassignment of the other nodes P, C, S, D also.
  • If something has been changed by the case, this is shown in the column group after.
  • A ✓ sign in column next signifies that the rebalancing is complete with this step. If the column after determines exactly one case, this case is given as the subsequent one, otherwise there are question marks.
  • The loop is contained in the sections from Start_D through "Delete case D2", where the problem of rebalancing is escalated level higher in the tree in that the parent P becomes the new current node N. So it takes maximally iterations to repair the tree (where is the height of the tree). Because the probability of escalation decreases exponentially with each iteration the total rebalancing cost is constant on average, indeed amortized constant. (Just as an aside: Mehlhorn & Sanders point out: "AVL trees do not support constant amortized update costs."[16]: 165, 158  This is true for the rebalancing after a deletion, but not AVL insertion.[33])
  • Out of the body of the loop there are exiting branches to the cases D3, D6, D5 + D6, D4, and D1; section "Delete case D3" of its own has three different exiting branches to the cases D6, D5 and D4.
  • Rotations occur in cases D6 and D5 + D6 and D3 + D5 + D6 – all outside the loop. Therefore, at most three rotations occur in total.

Delete case D1

[edit]

The current node N is the new root. One black node has been removed from every path, so the RB-properties are preserved. The black height of the tree decreases by 1.

  // Case_D1 (P == NULL):
  return; // deletion complete

Delete case D2

[edit]
first iteration
higher iteration
Delete case D2

P, S, and S’s children are black. After painting S red all paths passing through S, which are precisely those paths not passing through N, have one less black node. Now all paths in the subtree rooted by P have the same number of black nodes, but one fewer than the paths that do not pass through P, so requirement 4 may still be violated. After relabeling P to N the loop invariant is fulfilled so that the rebalancing can be iterated on one black level (= 1 tree level) higher.

    // Case_D2 (P+C+S+D black):
    S->color = RED;
    N = P; // new current node (maybe the root)
    // iterate 1 black level
    //   (= 1 tree level) higher
  } while ((P = N->parent) != NULL);
  // end of the (do while)-loop
  // (with return;)

Delete case D3

[edit]
first iteration
higher iteration
Delete case D3

The sibling S is red, so P and the nephews C and D have to be black. A dir-rotation at P turns S into N’s grandparent. Then after reversing the colors of P and S, the path through N is still short one black node. But N now has a red parent P and after the reassignment a black sibling S, so the transformations in cases D4, D5, or D6 are able to restore the RB-shape.

Case_D3: // S red && P+C+D black:
  RotateDirRoot(T,P,dir); // P may be the root
  P->color = RED;
  S->color = BLACK;
  S = C; // != NIL
  // now: P red && S black
  D = S->child[1-dir]; // distant nephew
  if (D != NIL && D->color == RED)
    goto Case_D6;      // D red && S black
  C = S->child[  dir]; // close   nephew
  if (C != NIL && C->color == RED)
    goto Case_D5;      // C red && S+D black
  // Otherwise C+D considered black.
  // fall through to Case_D4

Delete case D4

[edit]
first iteration
higher iteration
Delete case D4

The sibling S and S’s children are black, but P is red. Exchanging the colors of S and P does not affect the number of black nodes on paths going through S, but it does add one to the number of black nodes on paths going through N, making up for the deleted black node on those paths.

Case_D4: // P red && S+C+D black:
  S->color = RED;
  P->color = BLACK;
  return; // deletion complete

Delete case D5

[edit]
first iteration
higher iteration
Delete case D5

The sibling S is black, S’s close child C is red, and S’s distant child D is black. After a (1-dir)-rotation at S the nephew C becomes S’s parent and N’s new sibling. The colors of S and C are exchanged. All paths still have the same number of black nodes, but now N has a black sibling whose distant child is red, so the constellation is fit for case D6. Neither N nor its parent P are affected by this transformation, and P may be red or black ( in the diagram).

Case_D5: // C red && S+D black:
  RotateDir(S,1-dir); // S is never the root
  S->color = RED;
  C->color = BLACK;
  D = S;
  S = C;
  // now: D red && S black
  // fall through to Case_D6

Delete case D6

[edit]
first iteration
higher iteration
Delete case D6

The sibling S is black, S’s distant child D is red. After a dir-rotation at P the sibling S becomes the parent of P and S’s distant child D. The colors of P and S are exchanged, and D is made black. The whole subtree still has the same color at its root S, namely either red or black ( in the diagram), which refers to the same color both before and after the transformation. This way requirement 3 is preserved. The paths in the subtree not passing through N (i.o.w. passing through D and node 3 in the diagram) pass through the same number of black nodes as before, but N now has one additional black ancestor: either P has become black, or it was black and S was added as a black grandparent. Thus, the paths passing through N pass through one additional black node, so that requirement 4 is restored and the total tree is in RB-shape.

Case_D6: // D red && S black:
  RotateDirRoot(T,P,dir); // P may be the root
  S->color = P->color;
  P->color = BLACK;
  D->color = BLACK;
  return; // deletion complete
} // end of RBdelete2

Because the algorithm transforms the input without using an auxiliary data structure and using only a small amount of extra storage space for auxiliary variables it is in-place.

Proof of bounds

[edit]
Figure 4: Red–black trees RBh of heights h=1,2,3,4,5,
each with minimal number 1,2,4,6 resp. 10 of nodes.

For there is a red–black tree of height with

      if even
if odd

nodes ( is the floor function) and there is no red–black tree of this tree height with fewer nodes—therefore it is minimal.
Its black height is     (with black root) or for odd (then with a red root) also  

Proof

For a red–black tree of a certain height to have minimal number of nodes, it must have exactly one longest path with maximal number of red nodes, to achieve a maximal tree height with a minimal black height. Besides this path all other nodes have to be black.[15]: 444 Proof sketch  If a node is taken off this tree it either loses height or some RB property.

The RB tree of height with red root is minimal. This is in agreement with

A minimal RB tree (RBh in figure 4) of height has a root whose two child subtrees are of different height. The higher child subtree is also a minimal RB tree, RBh–1, containing also a longest path that defines its height ; it has nodes and the black height The other subtree is a perfect binary tree of (black) height having black nodes—and no red node. Then the number of nodes is by induction

(higher subtree) (root) (second subtree)
resulting in
  ■

The graph of the function is convex and piecewise linear with breakpoints at where The function has been tabulated as A027383(h–1) for (sequence A027383 in the OEIS).

Solving the function for

The inequality leads to , which for odd leads to

.

So in both, the even and the odd case, is in the interval

(perfect binary tree) (minimal red–black tree)

with being the number of nodes.[34]

Conclusion

A red–black tree with nodes (keys) has tree height

Set operations and bulk operations

[edit]

In addition to the single-element insert, delete and lookup operations, several set operations have been defined on red–black trees: union, intersection and set difference. Then fast bulk operations on insertions or deletions can be implemented based on these set functions. These set operations rely on two helper operations, Split and Join. With the new operations, the implementation of red–black trees can be more efficient and highly-parallelizable.[35] In order to achieve its time complexities this implementation requires that the root is allowed to be either red or black, and that every node stores its own black height.

  • Join: The function Join is on two red–black trees t1 and t2 and a key k, where t1 < k < t2, i.e. all keys in t1 are less than k, and all keys in t2 are greater than k. It returns a tree containing all elements in t1, t2 also as k.
If the two trees have the same black height, Join simply creates a new node with left subtree t1, root k and right subtree t2. If both t1 and t2 have black root, set k to be red. Otherwise k is set black.
If the black heights are unequal, suppose that t1 has larger black height than t2 (the other case is symmetric). Join follows the right spine of t1 until a black node c, which is balanced with t2. At this point a new node with left child c, root k (set to be red) and right child t2 is created to replace c. The new node may invalidate the red–black invariant because at most three red nodes can appear in a row. This can be fixed with a double rotation. If double red issue propagates to the root, the root is then set to be black, restoring the properties. The cost of this function is the difference of the black heights between the two input trees.
  • Split: To split a red–black tree into two smaller trees, those smaller than key x, and those larger than key x, first draw a path from the root by inserting x into the red–black tree. After this insertion, all values less than x will be found on the left of the path, and all values greater than x will be found on the right. By applying Join, all the subtrees on the left side are merged bottom-up using keys on the path as intermediate nodes from bottom to top to form the left tree, and the right part is symmetric.
For some applications, Split also returns a boolean value denoting if x appears in the tree. The cost of Split is order of the height of the tree. This algorithm actually has nothing to do with any special properties of a red–black tree, and may be used on any tree with a join operation, such as an AVL tree.

The join algorithm is as follows:

function joinRightRB(TL, k, TR):
    if (TL.color=black) and (TL.blackHeight=TR.blackHeight):
        return Node(TL,⟨k,red⟩,TR)
    T'=Node(TL.left,⟨TL.key,TL.color⟩,joinRightRB(TL.right,k,TR))
    if (TL.color=black) and (T'.right.color=T'.right.right.color=red):
        T'.right.right.color=black;
        return rotateLeft(T')
    return T' /* T''[recte T'] */

function joinLeftRB(TL, k, TR):
  /* symmetric to joinRightRB */

function join(TL, k, TR):
    if TL.blackHeight>TR.blackHeight:
        T'=joinRightRB(TL,k,TR)
        if (T'.color=red) and (T'.right.color=red):
            T'.color=black
        return T'
    if TR.blackHeight>TL.blackHeight:
        /* symmetric */
    if (TL.color=black) and (TR.color=black):
        return Node(TL,⟨k,red⟩,TR)
    return Node(TL,⟨k,black⟩,TR)

The split algorithm is as follows:

function split(T, k):
    if (T = nil) return (nil, false, nil)
    if (k = T.key) return (T.left, true, T.right)
    if (k < T.key):
        (L',b,R') = split(T.left, k)
        return (L',b,join(R',T.key,T.right))
    (L',b,R') = split(T.right, k)
    return (join(T.left,T.key,L'),b,T.right)

The union of two red–black trees t1 and t2 representing sets A and B, is a red–black tree t that represents AB. The following recursive function computes this union:

function union(t1, t2):
    if t1 = nil return t2
    if t2 = nil return t1
    (L1,b,R1)=split(t1,t2.key)
    proc1=start:
        TL=union(L1,t2.left)
    proc2=start:
        TR=union(R1,t2.right)
    wait all proc1,proc2
    return join(TL, t2.key, TR)

Here, split is presumed to return two trees: one holding the keys less its input key, one holding the greater keys. (The algorithm is non-destructive, but an in-place destructive version exists also.)

The algorithm for intersection or difference is similar, but requires the Join2 helper routine that is the same as Join but without the middle key. Based on the new functions for union, intersection or difference, either one key or multiple keys can be inserted to or deleted from the red–black tree. Since Split calls Join but does not deal with the balancing criteria of red–black trees directly, such an implementation is usually called the "join-based" implementation.

The complexity of each of union, intersection and difference is for two red–black trees of sizes and . This complexity is optimal in terms of the number of comparisons. More importantly, since the recursive calls to union, intersection or difference are independent of each other, they can be executed in parallel with a parallel depth .[35] When , the join-based implementation has the same computational directed acyclic graph (DAG) as single-element insertion and deletion if the root of the larger tree is used to split the smaller tree.

Parallel algorithms

[edit]

Parallel algorithms for constructing red–black trees from sorted lists of items can run in constant time or time, depending on the computer model, if the number of processors available is asymptotically proportional to the number of items where . Fast search, insertion, and deletion parallel algorithms are also known.[36]

The join-based algorithms for red–black trees are parallel for bulk operations, including union, intersection, construction, filter, map-reduce, and so on.

Parallel bulk operations

[edit]

Basic operations like insertion, removal or update can be parallelised by defining operations that process bulks of multiple elements. It is also possible to process bulks with several basic operations, for example bulks may contain elements to insert and also elements to remove from the tree.

The algorithms for bulk operations aren't just applicable to the red–black tree, but can be adapted to other sorted sequence data structures also, like the 2–3 tree, 2–3–4 tree and (a,b)-tree. In the following different algorithms for bulk insert will be explained, but the same algorithms can also be applied to removal and update. Bulk insert is an operation that inserts each element of a sequence into a tree .

Join-based

[edit]

This approach can be applied to every sorted sequence data structure that supports efficient join- and split-operations.[37] The general idea is to split and in multiple parts and perform the insertions on these parts in parallel.

  1. First the bulk of elements to insert must be sorted.
  2. After that, the algorithm splits into parts of about equal sizes.
  3. Next the tree must be split into parts in a way, so that for every following constraints hold:
  4. Now the algorithm inserts each element of into sequentially. This step must be performed for every , which can be done by up to processors in parallel.
  5. Finally, the resulting trees will be joined to form the final result of the entire operation.

Note that in Step 3 the constraints for splitting assure that in Step 5 the trees can be joined again and the resulting sequence is sorted.

The pseudo code shows a simple divide-and-conquer implementation of the join-based algorithm for bulk-insert. Both recursive calls can be executed in parallel. The join operation used here differs from the version explained in this article, instead join2 is used, which misses the second parameter k.

bulkInsert(T, I, k):
    I.sort()
    bulklInsertRec(T, I, k)

bulkInsertRec(T, I, k):
    if k = 1:
        forall e in I: T.insert(e)
    else
        m := ⌊size(I) / 2⌋
        (T1, _, T2) := split(T, I[m])
        bulkInsertRec(T1, I[0 .. m], ⌈k / 2⌉)
            || bulkInsertRec(T2, I[m + 1 .. size(I) - 1], ⌊k / 2⌋)
        T ← join2(T1, T2)
Execution time
[edit]

Sorting is not considered in this analysis.

#recursion levels
T(split) + T(join)
insertions per thread
T(insert)
T(bulkInsert) with = #processors

This can be improved by using parallel algorithms for splitting and joining. In this case the execution time is .[38]

Work
[edit]
#splits, #joins
W(split) + W(join)
#insertions
W(insert)
W(bulkInsert)

Pipelining

[edit]

Another method of parallelizing bulk operations is to use a pipelining approach.[39] This can be done by breaking the task of processing a basic operation up into a sequence of subtasks. For multiple basic operations the subtasks can be processed in parallel by assigning each subtask to a separate processor.

  1. First the bulk of elements to insert must be sorted.
  2. For each element in the algorithm locates the according insertion position in . This can be done in parallel for each element since won't be mutated in this process. Now must be divided into subsequences according to the insertion position of each element. For example is the subsequence of that contains the elements whose insertion position would be to the left of node .
  3. The middle element of every subsequence will be inserted into as a new node . This can be done in parallel for each since by definition the insertion position of each is unique. If contains elements to the left or to the right of , those will be contained in a new set of subsequences as or .
  4. Now possibly contains up to two consecutive red nodes at the end of the paths form the root to the leaves, which needs to be repaired. Note that, while repairing, the insertion position of elements have to be updated, if the corresponding nodes are affected by rotations.
    If two nodes have different nearest black ancestors, they can be repaired in parallel. Since at most four nodes can have the same nearest black ancestor, the nodes at the lowest level can be repaired in a constant number of parallel steps.
    This step will be applied successively to the black levels above until is fully repaired.
  5. The steps 3 to 5 will be repeated on the new subsequences until is empty. At this point every element has been inserted. Each application of these steps is called a stage. Since the length of the subsequences in is and in every stage the subsequences are being cut in half, the number of stages is .
    Since all stages move up the black levels of the tree, they can be parallelised in a pipeline. Once a stage has finished processing one black level, the next stage is able to move up and continue at that level.
Execution time
[edit]

Sorting is not considered in this analysis. Also, is assumed to be smaller than , otherwise it would be more efficient to construct the resulting tree from scratch.

T(find insert position)
#stages
T(insert) + T(repair)
T(bulkInsert) with ~ #processors
Work
[edit]
W(find insert positions)
#insertions, #repairs
W(insert) + W(repair)
W(bulkInsert)

See also

[edit]

References and notes

[edit]
  1. ^ a b Cormen, Thomas H.; Leiserson, Charles E.; Rivest, Ronald L.; Stein, Clifford (2001). "Red–Black Trees". Introduction to Algorithms (2nd ed.). MIT Press. pp. 273–301. ISBN 978-0-262-03293-3.
  2. ^ Paton, James. "Red–Black Trees".
  3. ^ Morris, John (1998). "Red–Black Trees". Data Structures and Algorithms.
  4. ^ Bayer, Rudolf (1972). "Symmetric binary B-Trees: Data structure and maintenance algorithms". Acta Informatica. 1 (4): 290–306. doi:10.1007/BF00289509. S2CID 28836825.
  5. ^ Drozdek, Adam (2001). Data Structures and Algorithms in Java (2 ed.). Sams Publishing. p. 323. ISBN 978-0534376680.
  6. ^ a b Guibas, Leonidas J.; Sedgewick, Robert (1978). "A Dichromatic Framework for Balanced Trees". Proceedings of the 19th Annual Symposium on Foundations of Computer Science. pp. 8–21. doi:10.1109/SFCS.1978.3.
  7. ^ "Red Black Trees". eternallyconfuzzled.com. Archived from the original on 2007-09-27. Retrieved 2015-09-02.
  8. ^ Sedgewick, Robert (2012). Red–Black BSTs. Coursera. A lot of people ask why did we use the name red–black. Well, we invented this data structure, this way of looking at balanced trees, at Xerox PARC that was the home of the personal computer and many other innovations that we live with today entering[sic] graphic user interfaces, Ethernet and object-oriented programmings[sic] and many other things. But one of the things that was invented there was laser printing and we were very excited to have nearby color laser printer that could print things out in color and out of the colors the red looked the best. So, that's why we picked the color red to distinguish red links, the types of links, in three nodes. So, that's an answer to the question for people that have been asking.
  9. ^ "Where does the term "Red/Black Tree" come from?". programmers.stackexchange.com. Retrieved 2015-09-02.
  10. ^ Andersson, Arne (1993-08-11). "Balanced search trees made simple". In Dehne, Frank; Sack, Jörg-Rüdiger; Santoro, Nicola; Whitesides, Sue (eds.). Algorithms and Data Structures (Proceedings). Lecture Notes in Computer Science. Vol. 709. Springer-Verlag Berlin Heidelberg. pp. 60–71. CiteSeerX 10.1.1.118.6192. doi:10.1007/3-540-57155-8_236. ISBN 978-3-540-57155-1. Archived from the original on 2018-12-08. Alt URL
  11. ^ Okasaki, Chris (1999-01-01). "Red–black trees in a functional setting". Journal of Functional Programming. 9 (4): 471–477. doi:10.1017/S0956796899003494. ISSN 1469-7653. S2CID 20298262.
  12. ^ Sedgewick, Robert (1983). Algorithms (1st ed.). Addison-Wesley. ISBN 978-0-201-06672-2.
  13. ^ Sedgewick, Robert; Wayne, Kevin. "RedBlackBST.java". algs4.cs.princeton.edu. Retrieved 7 April 2018.
  14. ^ Sedgewick, Robert (2008). "Left-leaning Red–Black Trees" (PDF).
  15. ^ a b c Sedgewick, Robert; Wayne, Kevin (2011). Algorithms (4th ed.). Addison-Wesley Professional. ISBN 978-0-321-57351-3.
  16. ^ a b c d Mehlhorn, Kurt; Sanders, Peter (2008). "7. Sorted Sequences" (PDF). Algorithms and Data Structures: The Basic Toolbox. Berlin/Heidelberg: Springer. CiteSeerX 10.1.1.148.2305. doi:10.1007/978-3-540-77978-0. ISBN 978-3-540-77977-3.
  17. ^ a b Cormen, Thomas; Leiserson, Charles; Rivest, Ronald; Stein, Clifford (2022). "13. Red–Black Trees". Introduction to Algorithms (4th ed.). MIT Press. pp. 331–332. ISBN 9780262046305.
  18. ^ Using Knuth’s definition of order: the maximum number of children
  19. ^ Sedgewick, Robert (1998). Algorithms in C++. Addison-Wesley Professional. pp. 565–575. ISBN 978-0-201-35088-3.
  20. ^ "IBM Developer". developer.ibm.com. Retrieved 25 May 2024.
  21. ^ "The Implementation of epoll (1)". September 2014.
  22. ^ Pfaff 2004
  23. ^ a b "Robert Sedgewick" (PDF). Cs.princeton.edu. 4 June 2020. Retrieved 26 March 2022.
  24. ^ "Balanced Trees" (PDF). Cs.princeton.edu. Retrieved 26 March 2022.
  25. ^ Demaine, E. D.; Harmon, D.; Iacono, J.; Pătraşcu, M. (2007). "Dynamic Optimality—Almost" (PDF). SIAM Journal on Computing. 37 (1): 240. doi:10.1137/S0097539705447347. S2CID 1480961.
  26. ^ "How does a HashMap work in JAVA". coding-geek.com.
  27. ^ Tarjan, Robert Endre (April 1985). "Amortized Computational Complexity" (PDF). SIAM Journal on Algebraic and Discrete Methods. 6 (2): 306–318. doi:10.1137/0606031.
  28. ^ The important thing about these tree rotations is that they preserve the in-order sequence of the tree’s nodes.
  29. ^ "Ben Pfaff (2007): Online HTML version of a well-documented collection of binary search tree and balanced tree library routines".
  30. ^ a b The left columns contain far less nodes than the right ones, especially for removal. This indicates that some efficiency can be gained by pulling the first iteration out of the rebalancing loops of insertion and deletion, because many of the named nodes are NIL nodes in the first iteration and definitively non-NIL later. (See also this remark.)
  31. ^ Rotations have been placed before recoloring for reasons of clarity. But the two commute, so that it is free choice to move the rotation to the tail.
  32. ^ a b The same partitioning is found in Ben Pfaff.
  33. ^ Dinesh P. Mehta, Sartaj Sahni (Ed.) Handbook of Data Structures and Applications 10.4.2
  34. ^ Equality at the upper bound holds for the minimal RB trees RB2k of even height with nodes and only for those. So the inequality is marginally more precise than the widespread e.g. in Cormen p. 264.
    Moreover, these trees are binary trees that admit one and only one coloring conforming to the RB requirements 1 to 4. But there are further such trees, e.g. appending a child node to a black leaf always forces it to red. (A minimal RB tree of odd height allows to flip the root’s color from red to black.)
  35. ^ a b Blelloch, Guy E.; Ferizovic, Daniel; Sun, Yihan (2016), "Just Join for Parallel Ordered Sets" (PDF), Symposium on Parallel Algorithms and Architectures, Proc. of 28th ACM Symp. Parallel Algorithms and Architectures (SPAA 2016), ACM, pp. 253–264, arXiv:1602.02120, doi:10.1145/2935764.2935768, ISBN 978-1-4503-4210-0, S2CID 2897793.
  36. ^ Park, Heejin; Park, Kunsoo (2001). "Parallel algorithms for red–black trees". Theoretical Computer Science. 262 (1–2): 415–435. doi:10.1016/S0304-3975(00)00287-5. Our parallel algorithm for constructing a red–black tree from a sorted list of items runs in time with processors on the CRCW PRAM and runs in time with processors on the EREW PRAM.
  37. ^ Sanders, Peter (2019). Mehlhorn, Kurt; Dietzfelbinger, Martin; Dementiev, Roman (eds.). Sequential and Parallel Algorithms and Data Structures : The Basic Toolbox. Springer eBooks. Cham: Springer. pp. 252–253. doi:10.1007/978-3-030-25209-0. ISBN 9783030252090. S2CID 201692657.
  38. ^ Akhremtsev, Yaroslav; Sanders, Peter (2016). "Fast Parallel Operations on Search Trees". HiPC 2016, the 23rd IEEE International Conference on High Performance Computing, Data, and Analytics, Hyderabad, India, December, 19-22. IEEE, Piscataway (NJ): 291–300. arXiv:1510.05433. Bibcode:2015arXiv151005433A. ISBN 978-1-5090-5411-4.
  39. ^ Jájá, Joseph (1992). An introduction to parallel algorithms. Reading, Mass. [u.a.]: Addison-Wesley. pp. 65–70. ISBN 0201548569. Zbl 0781.68009.

Further reading

[edit]
[edit]