Jump to content

Rocket engine test facility

From Wikipedia, the free encyclopedia
For the former Glenn Research Center facility, see Rocket Engine Test Facility.
Rocket firing at the WSTF

A rocket engine test facility is a location where rocket engines may be tested on the ground, under controlled conditions. A ground test program is generally required before the engine is certified for flight. Ground testing is very inexpensive in comparison to the cost of risking an entire mission or the lives of a flight crew.

The test conditions available are usually described as sea level ambient or altitude. Sea level testing is useful for evaluations of start characteristics for rockets launched from the ground. However, sea level testing does not provide a true simulation of the majority of the operating environment of the rocket. Better simulations are provided by altitude test facilities.

Sea level tests

[edit]
Sea Level engine test stand at the John C. Stennis Space Center

The facility must restrain the rocket and direct the rocket exhaust safely toward the open atmosphere. Structural integrity, system operations, and sea level thrust can be measured and verified. However, rockets are primarily intended for operations in very thin or no atmosphere. Systems that work well on the ground may behave very differently in space.

A typical sea level test stand may be designed to restrain the rocket engine in either a horizontal or vertical position. Liquid rocket engines are usually fired in a vertical position because the propellant pump intakes are designed to draw fuel from the bottoms of the fuel tanks. The effect of the propellant weight on the thrust measurement system (TMS) must be accounted for as the engine is firing. The rocket exhaust is directed into a flame bucket or trench. The flame trench is designed to redirect the hot exhaust to a safe direction and is protected by a water deluge system that both cools the exhaust and also reduces the sound pressure level (loudness). The sound pressure level of large rocket engines has been measured at greater than 200 decibels — one of the loudest man-made sounds.

Solid rocket engines may be fired in either a vertical or horizontal orientation. The thrust measurement system does not need to account for the changing weight of the rocket in a horizontal position. The associated flame trench need not be so sturdy as with a vertical test stand, however a water system may be less effective at reducing the sound pressure level.

All test stands require safety provisions to protect against the destructive potential of an unplanned engine detonation. The safety provisions generally include building the stand some minimum distance from inhabited areas or other critical facilities, placing the stand behind a thick concrete blast wall or earthen berm, and using some form of inerting system (either gaseous nitrogen or helium) to eliminate the buildup of explosive mixtures.

Altitude tests

[edit]

The advantage of altitude testing is to obtain a better simulation of the rocket's operating environment. Air pressure decreases with increasing altitude. Effects of the lower air pressure include higher rocket thrust and lower heat transfer.

An altitude facility is much more complex than a sea level facility. The rocket is installed inside an enclosed chamber which is evacuated to a minimum pressure level before rocket firing. A typical chamber operating pressure of 0.16 psia (equivalent to an altitude of 100,000 feet) is established inside the chamber by some form of mechanical pumping. Mechanical pumping is typically provided by steam ejector/diffusers. If the products of combustion from the rocket firing include flammable or explosive materials, the chamber must be inerted, typically with gaseous nitrogen (GN2). The inerting process prevents build-up of potentially explosive materials inside the chamber or exhaust ducting.

Rocket ground test facilities

[edit]

Test facilities in the United States

[edit]

Rocket ground test facilities outside the United States

[edit]

References

[edit]
  1. ^ "Astra – Alameda's Hometown Rocket Company". Alameda Post. September 16, 2022. Retrieved January 1, 2023.
  2. ^ "Lockheed Martin Santa Cruz Facility, California". The Center for Land Use Interpretation. Retrieved January 1, 2023.
  3. ^ "Northrop Grumman Capistrano Test Site Special Collection". San Diego Air & Space Museum. Retrieved January 1, 2023.
  4. ^ "NTS San Bernardino — World-Class High Pressure/High Flow Fluid and Rocket Engine Testing". NTS. Retrieved January 1, 2023.
  5. ^ "Beaumont California Rocket Test Sites". Lockheed Martin. 2 June 2022. Retrieved January 1, 2023.
  6. ^ "Redlands, Loma Linda, Riverside, California Rocket Motor Production Facilities". Lockheed Martin. 14 June 2022. Retrieved January 1, 2023.
  7. ^ "Historic Silicon Valley site becoming new public open space preserve". The Mercury News. August 12, 2016. Retrieved January 1, 2023.
  8. ^ "Marshall Space Flight Center Test Capabilities" (PDF). NASA. Retrieved 2023-01-31.
  9. ^ "NASA's Neil A. Armstrong Test Facility". NASA. 2021-11-02. Retrieved 2023-01-31.
  10. ^ EMRTC Rocket Engine Test Site
  11. ^ Leone, Dan (2013-05-13). "SpaceX Leases Pad in New Mexico for Next Grasshopper Tests". SpaceNews. Archived from the original on September 3, 2013. Retrieved 2013-08-03.
  12. ^ "XCOR Main Propulsion". www.xcor.com. Retrieved 2017-03-13.[permanent dead link]

Bibliography

[edit]
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Rocket_engine_test_facility&oldid=1233832166"