Jump to content

Rotax 185

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by BD2412 (talk | contribs) at 22:24, 23 June 2015 (External links: Consensus at Template talk:Aviation lists#RfC: Should this navbox be removed from non-mentioned articles? using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

185
Rotax 185 with Lazair aircraft mount and muffler installed
Type Piston aero-engine
National origin Austria
Manufacturer Rotax
Major applications Ultraflight Lazair

The Rotax 185 is a 9 hp (7 kW), single cylinder, two-stroke, direct drive, industrial engine, built by Rotax of Austria for use in fire fighting water pumps that has also been adapted as an aircraft engine for use in ultralight aircraft.[1]

Development

The Rotax 185 was designed as a fire-fighting pump, but the rights to the design were sold by Rotax to the Wildfire Group who use the engine in their Mark 3 High Pressure Centrifugal Fire Pump.[2]

Due to its design purpose as a water pump engine it proved reliable enough for use on ultralight aircraft,[3][4] and was adopted as an engine for the twin-engine Ultraflight Lazair ultralight aircraft - as a replacement for the 5.5 hp (4 kW) Pioneer chainsaw engines used on the early Series I. The 185 provides enough power to allow the Lazair to be flown on floats.

In the Lazair application the 185 was used to drive two propellers stacked together in biplane configuration. This was not done for aerodynamic reasons but rather because the Lazair manufacturer had ample quantities of the nylon propellers on hand for its earlier engines and stacking them was more cost efficient than scrapping them and buying new propellers.[5]

Applications

A Lazair with two Rotax 185s installed, powering biplane propellers
  • Lazair
  • Wildfire Mark-3 High Pressure Centrifugal Fire Pump

Specifications (185)

Data from Rotax 185 Engine Data[6]

General characteristics

  • Type: two-stroke air-cooled engine
  • Bore: 2.441 in (62 mm)
  • Stroke: 2.4 in (61 mm)
  • Displacement: 185 cc (11.29 cu in)

Components

  • Valvetrain: piston ports
  • Fuel system: Tillotson pneumatic pump carburettor
  • Fuel type: regular autofuel
  • Oil system: premixed in the fuel at 40:1
  • Cooling system: free air
  • Reduction gear: Custom made belt drive reduction units have been employed

Performance

  • Power output: 9 hp (7 kW) at 5000 rpm
  • Fuel consumption: 4 l/hr (1 US gph)

References

  1. ^ LazairForce (n.d.). "Rotax 185 Piston de-carboning Bearings re & re". Retrieved 2009-03-11.{{cite web}}: CS1 maint: year (link)
  2. ^ Wildfire (2004). "Mark-3 High Pressure Centrifugal Fire Pump" (PDF). Retrieved 2009-03-12.
  3. ^ Hunt, Adam & Ruth Merkis-Hunt: Skeletal Remains, pages 64-70. Kitplanes Magazine, September 2000.
  4. ^ Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-21. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4
  5. ^ Lazair Force (n.d.). "An introduction to the Lazair". Retrieved 2007-10-31.
  6. ^ LazairForce (n.d.). "Rotax 185 Engine Data". Retrieved 2009-03-11.{{cite web}}: CS1 maint: year (link)