Rubber band: Difference between revisions
No edit summary |
|||
| Line 15: | Line 15: | ||
|doi= }}<!-- ref from Stephen Perry page --></ref><ref>[http://www.todayinsci.com/3/3_17.htm March 17 - Today in Science History]</ref><ref name="madehow" /><ref>British Patent 13880/1845, "Specification of the Patent granted to Stephen Perry, of Woodland's-place, St. John's-wood, in the County of Middlesex, Gentleman, and Thomas Barnabas Daft, of Birmingham, Manufacturer, for Improvements in Springs to be applied to Girths, Belts, and Bandages, and Improvements in the Manufacture of Elastic Bands. — Sealed March 17, 1845", http://todayinsci.com/Events/Misc/Perry-ElasticBandsPatent.htm</ref> [[Mesoamerican]]s (such as Aztecs and Mayans) were using natural rubber products by 1600 B.C.; they mixed latex with other materials to get desired properties. In 1839, [[Charles Goodyear]] developed [[vulcanization]] which is used to make rubber today.<ref>{{cite web|last=Bhanoo|first=Sindya|title=Ancient Mesoamerica's Rubber Industry|url=http://www.nytimes.com/2010/06/22/science/22obrubber.html?_r=0|publisher=New York Times Corporation|accessdate=29 March 2013}}</ref> Most rubber bands are manufactured out of natural rubber. Rubber bands come in a variety of sizes. |
|doi= }}<!-- ref from Stephen Perry page --></ref><ref>[http://www.todayinsci.com/3/3_17.htm March 17 - Today in Science History]</ref><ref name="madehow" /><ref>British Patent 13880/1845, "Specification of the Patent granted to Stephen Perry, of Woodland's-place, St. John's-wood, in the County of Middlesex, Gentleman, and Thomas Barnabas Daft, of Birmingham, Manufacturer, for Improvements in Springs to be applied to Girths, Belts, and Bandages, and Improvements in the Manufacture of Elastic Bands. — Sealed March 17, 1845", http://todayinsci.com/Events/Misc/Perry-ElasticBandsPatent.htm</ref> [[Mesoamerican]]s (such as Aztecs and Mayans) were using natural rubber products by 1600 B.C.; they mixed latex with other materials to get desired properties. In 1839, [[Charles Goodyear]] developed [[vulcanization]] which is used to make rubber today.<ref>{{cite web|last=Bhanoo|first=Sindya|title=Ancient Mesoamerica's Rubber Industry|url=http://www.nytimes.com/2010/06/22/science/22obrubber.html?_r=0|publisher=New York Times Corporation|accessdate=29 March 2013}}</ref> Most rubber bands are manufactured out of natural rubber. Rubber bands come in a variety of sizes. |
||
every rubber band is a penis |
|||
==Manufacturing== |
==Manufacturing== |
||
Rubber bands are made by extruding the rubber into a long [[Cylinder (geometry)|tube]] to provide its general shape, putting the tubes on [[mandrel |mandrels]], curing the rubber with heat, and then slicing it across the width of the tube into little bands.<ref name="madehow">[http://www.madehow.com/Volume-1/Rubber-Band.html How rubber bands are made]. |
Rubber bands are made by extruding the rubber into a long [[Cylinder (geometry)|tube]] to provide its general shape, putting the tubes on [[mandrel |mandrels]], curing the rubber with heat, and then slicing it across the width of the tube into little bands.<ref name="madehow">[http://www.madehow.com/Volume-1/Rubber-Band.html How rubber bands are made]. |
||
Revision as of 22:21, 2 October 2014
A rubber band, also known as a binder, elastic band, lackey band, laggy band, or elastic, is a short length of rubber and latex, elastic in nature and formed in the shape of a circle which is commonly used to hold multiple objects together. The rubber band was patented in England on March 17, 1845 by Stephen Perry.[1][2][3][4] Mesoamericans (such as Aztecs and Mayans) were using natural rubber products by 1600 B.C.; they mixed latex with other materials to get desired properties. In 1839, Charles Goodyear developed vulcanization which is used to make rubber today.[5] Most rubber bands are manufactured out of natural rubber. Rubber bands come in a variety of sizes.
every rubber band is a penis
Manufacturing
Rubber bands are made by extruding the rubber into a long tube to provide its general shape, putting the tubes on mandrels, curing the rubber with heat, and then slicing it across the width of the tube into little bands.[3][6]This causes the tube to split into multiple sections, creating a rubber band.
Material
While other rubber products may use synthetic rubber, most rubber bands are primarily manufactured using natural rubber because of its superior elasticity.[3]
Natural rubber originates from the latex of the rubber tree. Natural rubber is made from latex which is acquired by tapping into the bark layers of the rubber tree. Rubber trees belong to the spurge family (Euphorbiaceae) and live in warm, tropical areas. Once the latex has been "tapped" and is exposed to the air it begins to harden and become elastic, or "rubbery". Rubber trees only survive in hot, humid climates near the equator and so the majority of latex is produced in the Southeast Asian countries of Malaysia, Thailand and Indonesia.
Rubber band sizes
Measuring
A rubber band has three basic dimensions: length, width, and thickness. (See picture.)
A rubber band's length is half its circumference. Its thickness is the distance from the inner circle to the outer circle, and its width is the distance from one edge to the other.
If one imagines a rubber band in manufacture, that is, a long tube of rubber on a mandrel, before it is sliced into rubber bands, the band's width is decided by how far apart the slices are cut.
Rubber band size numbers
A rubber band is given a [quasi-]standard number based on its dimensions.
Generally, rubber bands are numbered from smallest to largest, width first. Thus, rubber bands numbered 8-19 are all 1/16 inch wide, with length going from 7/8 inch to 31⁄2 inches. Rubber band numbers 30-34 are for width of 1/8 inch, going again from shorter to longer. For even longer bands, the numbering starts over for numbers above 100, again starting at width 1/16 inch.
The origin of these size numbers is not clear and there appears to be some conflict in the "standard" numbers. For example, one distributor[7] has a size 117 being 1/16 inch wide and a size 127 being 1/8 inch wide. However, an OfficeMax size 117[8] is 1/8 inch wide. A manufacturer[9] has a size 117A (1/16 inch wide) and a 117B (1/8 inch wide). Another distributor[10] calls them 7AA (1/16 inch wide) and 7A (1/8 inch wide) (but labels them as specialty bands).
| Rubber Band Sizes | |||
| Size | Length (in) | Width (in) | Thickness (in) |
| 10 | 1.25 | 1/16 | 1/32 |
| 12 | 1.75 | 1/16 | 1/32 |
| 14 | 2 | 1/16 | 1/32 |
| 31 | 2.5 | 1/8 | 1/32 |
| 32 | 3 | 1/8 | 1/32 |
| 33 | 3.5 | 1/8 | 1/32 |
| 61 | 2 | 1/4 | 1/32 |
| 62 | 2.5 | 1/4 | 1/32 |
| 63 | 3 | 1/4 | 1/32 |
| 64 | 3.5 | 1/4 | 1/32 |
| 117 | 7 | 1/16 | 1/32 |
Thermodynamics
Temperature affects the elasticity of a rubber band in an unusual way. Heating causes the rubber band to contract, and cooling causes expansion.[11] One can observe this: stretching a rubber band will cause it to release heat (press it against your lips to notice this), while releasing it after it has been stretched will make it absorb heat, causing its surroundings to become cooler. This effect is due to the higher entropy of the unstressed state, which is more entangled, and therefore has more states available. The result is that a rubber band behaves somewhat like an ideal monatomic gas, inasmuch as (to good approximation) elastic polymers do not store any potential energy in stretched chemical bonds or elastic work done in stretching molecules, when work is done upon them. Instead, all work done on the rubber is "released" (not stored) and appears immediately in the polymer as thermal energy.
Red rubber bands
In 2004 in the UK, following complaints from the public about postal carriers creating litter by discarding the rubber bands which they used to keep their mail together, the Royal Mail introduced red bands for their workers to use: it was hoped that, as the bands were easier to spot than the traditional brown ones and since only the Royal Mail used them, employees would see (and feel compelled to pick up) any red bands which they had inadvertently dropped. Currently, some 342 million red bands are used every year.[12]
Ranger bands
This type of rubber band was popularized by use in the military. Ranger bands are essentially sections of tire inner tubing cut into various sizes. They have the advantage of being versatile, durable, and resistant to weather and abrasion. They are commonly used for lashings, and can also be used for makeshift handle grips, providing a strong high-friction surface with excellent shock absorption.[13]
Elastration
In animal husbandry, rubber bands are used for docking and the male castration of livestock. The procedure involves banding the body part with a tight latex (rubber) band to restrict blood flow. The part eventually drops off.
Model use
Rubber bands have long been one of the methods of powering small free-flight model aeroplanes, the rubber band being anchored at the rear of the fuselage and connected to the propeller at the front. To 'wind up' the 'engine', the propeller is repeatedly turned, twisting the rubber band. When the propeller has had enough turns, the propeller is released and the model launched, the rubber band then turning the propeller rapidly until it has unwound.
One of the first to use this method was pioneer aerodynamicist George Cayley, who used rubber band driven motors for powering his small experimental models. These 'rubber motors' have also been used for powering small model boats.
See also
References
- ^ Loadman, John; James, Francis (2009), The Hancocks of Marlborough: Rubber, Art and the Industrial Revolution - A Family of Inventive Genius, p. 89, ISBN 978-0-19-957355-4
- ^ March 17 - Today in Science History
- ^ a b c How rubber bands are made. This reference states that the rubber is vulcanized before it is extruded. The rubber is then "cured" on mandrels.[unreliable source?][failed verification] The "Made How" reference appears to directly copy text from other sources, some of which appears to be incorrect. The exact same text regarding Thomas Hancock appears in a 1995 book entitled "CD's, super glue and salsa: how everyday products are made" by Kathleen Witman, Kyung-Sun Lim, Neil Schlager. Contradicting other sources, both credit Thomas Perry rather than Stephen Perry for the invention of the rubber band.
- ^ British Patent 13880/1845, "Specification of the Patent granted to Stephen Perry, of Woodland's-place, St. John's-wood, in the County of Middlesex, Gentleman, and Thomas Barnabas Daft, of Birmingham, Manufacturer, for Improvements in Springs to be applied to Girths, Belts, and Bandages, and Improvements in the Manufacture of Elastic Bands. — Sealed March 17, 1845", http://todayinsci.com/Events/Misc/Perry-ElasticBandsPatent.htm
- ^ Bhanoo, Sindya. "Ancient Mesoamerica's Rubber Industry". New York Times Corporation. Retrieved 29 March 2013.
- ^ Lee Rubber Products, How rubber bands are made. This reference states that the rubber is vulcanized after it is extruded.
- ^ BigWig Enterprises, BigWig Size Chart
- ^ OfficeMax, #OM97352, UPC 011491-973520
- ^ Lee Rubber Products, How do rubber bands measure up?
- ^ Dykema Rubber Band
- ^ "Thermodynamics of a Rubber Band", American Journal of Physics, 31 (5): 397–397, May 1963, doi:10.1119/1.1969535
- ^ The Times: "Posties' red rubber bands stretch public's patience"
- ^ http://www.instructables.com/id/Ranger-Bands-Rubber-Bands-on-Steroids/
External links
- http://www.rubberband.com/customer-service/glossary.html – Common Rubber Band Terminology
- http://www.the-rubber-band.com/ – The Unofficial Rubber Band Website