SS Conte di Savoia

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Dallas S12345 (talk | contribs) at 18:32, 6 June 2018 (Updated information). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

History
Italy
NameSS Conte di Savoia
OwnerItalian Line
Port of registryFlag of Italy Italy
BuilderCantieri Riuniti dell'Adriatico of Trieste, Italy
Launched18 October 1931
ChristenedMarie José of Belgium
Maiden voyage30 November 1932
FateScrapped in 1950
General characteristics
TypeOcean liner
Tonnage48,502 gross tons
Length248.25 m (814.5 feet)
Beam29.28 m (96 feet)
Height35 m (114.8 feet)
Draught9.5 m (31.2 feet)
Installed powerSteam turbines
PropulsionQuadruple propellers
Speed27 knots (50 km/h)
Capacity
  • 2,200 total:
  • 500 first class
  • 366 second class
  • 412 tourist class
  • 922 third class
Crew786 total

SS Conte di Savoia ("Count of Savoy") was an Italian ocean liner built in 1932 at the Cantieri Riuniti dell'Adriatico, Trieste.[1]

Conte di Savoia was originally ordered for the Lloyd Sabaudo line; however, after a merger with the Navigazione Generale Italiana, the ship was completed for the newly formed Italia Flotte Riunite.[1] The new Italia Line also controlled Rex, a similar though slightly larger ship completed just two months before Conte di Savoia. The Conte di Savoia was more modern in decoration and appearance than Rex and was the first major liner fitted with gyroscopic stabilisers.

History

In November 1932 she made her maiden voyage to New York.[1] Unlike Rex, she never made a record transatlantic crossing, reaching a best speed of 27.5 knots (31.6 mph) in 1933.[1]

Conte di Savoia had one unusual feature designed to increase passenger numbers. Three huge anti-rolling gyroscopes were fitted low down in a forward hold. These rotated at high revolutions and were designed to eliminate rolling - a persistent problem on the rough North Atlantic crossing that affected all shipping lines.[2] In practice they reduced the rolling by slowing down the rolling period, however, they also caused the vessel to "hang" annoyingly when the vessel was on the extreme limit of her rolls. For safety reasons the system was quickly abandoned on eastbound crossings where the prevailing weather produced following seas, although it was still used on westbound crossings. This was because with a following sea (and the deep slow rolls this generated) the vessel tended to 'hang' with the system turned on, and the inertia it generated made it harder for the vessel to right herself from heavy rolls.[2] None of this ever affected the operation of the shipping lines advertising department and the benefits of a "smooth crossing" were heavily promoted during the life of the ship.

Conte di Savoia being scrapped, 1950

Conte di Savoia was pulled from commercial line service in 1940 for wartime service.[3] She was sunk in 1943, and despite being refloated and rebuilt in 1945 was scrapped in 1950.[3]

See also

References

Footnotes

  1. ^ a b c d Dawson, p. 108
  2. ^ a b "Italian Liner To Defy The Waves" Popular Mechanics, April 1931
  3. ^ a b Dawson, p. 245

Bibliography

  • Dawson, Philip (2005). The Liner. New York, NY: WW Norton & Company. ISBN 0-393-06166-3.

External links