Ship class

Not to be confused with Ship classification.

Two of the three Template:Sclass-s that were built; Olympic (left) and Titanic (March 1912)

A ship class is a group of ships of a similar design. This is distinct from a ship type, which might reflect a similarity of tonnage or intended use. For example, USS Carl Vinson is a nuclear aircraft carrier (ship type) of the Template:Sclass- (ship class).

In the course of building a class of ships, design changes might be implemented. In such a case, the ships of different design might not be considered of the same class; each variation would either be its own class, or a subclass of the original class (see Template:Sclass2- for an example). If ships are built of a class whose production had been discontinued, a similar distinction might be made.

Ships in a class often have names linked by a common factor: e.g. Template:Sclass-s' names all begin with T (Turbulent, Tireless, Torbay); and Template:Sclass-s are named after American battles (Yorktown, Bunker Hill, Gettysburg, Anzio). Ships of the same class may be referred to as sister ships.

Naval ship class naming conventions

Overview

The name of a naval ship class is most commonly the name of the lead ship, the first ship commissioned or built of its design. However, other systems can be used without confusion or conflict. A descriptive name may be used; for example it was decided to group destroyers made to the same design as HMS Tomahawk, all named after weapons, as the Template:Sclass2- rather than Tomahawk class.

Europe in general

In European navies a class is named after the first ship commissioned regardless of when she was ordered or laid down. In some cases this has resulted in different class names being used in European and U.S. references; for example, European sources record the Template:Sclass-s of the United States Navy as the "Maryland class", as USS Maryland was commissioned before USS Colorado.

Germany

The West German Navy (Bundesmarine) used a three-digit type number for every class in service or in advanced project state. Modified versions were identified by a single letter suffix. After the reunification of Germany the German Navy (Deutsche Marine) kept the system. Informally, classes are also traditionally named after their lead ships.

Further information: List of ship classes of the Bundesmarine and Deutsche Marine

Indonesia

The Indonesian Navy has a traditional naming for its ships. Moreover, the ship's type and missions can be identified by the first number on the ship's three-digit hull number, which is placed on the front bows and the back of the stern. The naming convention is such as:

• Hull number begin by 1 (reserved for aircraft carriers): great statesmen (Presidents, Vice Presidents, etc.)
• Hull number begin by 2 (cruisers and destroyers): Indonesia's main islands (for cruisers) and National heroes (for destroyers)
• Hull number begin by 3 (frigates, ocean escorts, corvettes): national heroes
• Hull number begin by 4 (submarines, submarine tenders): mythical weapons (for submarines), National heroes (for submarine tenders)
• Hull number begin by 5 (amphibious ships, LSTs, LPDs, LCUs, command ships): main and strategic bays (for LSTs), big cities (for LPDs), small cities (for LCUs), National heroes (for command ships)
• Hull number begin by 6 (fast attack ships): mythical weapons (previous names for missile boats), traditional weapons (current names for fast missile boats), wild animals (for fast torpedo boats)
• Hull number begin by 7 (minesweepers, minehunters, mine countermeasures ships): every island begin with letter "R"
• Hull number begin by 8 (patrol boats): native fishes and sea creatures, native snakes and wild reptiles, wild insects, geographical places (such as towns, lakes or rivers begin with "si-", like Sikuda, Sigurot, Sibarau)
• Hull number begin by 9 (supporting ships, oilers, tugs, troops transports, oceanographic research ships, sailing ships, etc.): volcanoes, cities, mythical figures, geographical capes and straits

Russia/Soviet Union

See also: List of ships of Russia by project number

Russian (and Soviet) ship classes are formally named by the numbered project that designed them. That project sometimes, but not always, had a metaphorical name, and almost always had a NATO reporting name. In addition, the ships of the class would be numbered, and that number prefixed by a letter indicating the role of that type of vessel. For example, Project 641 had no other name, though NATO referred to its members as Template:Sclass2-s.

United Kingdom

The British Royal Navy has used several methods of naming classes. In addition to the accepted European convention, some classes have been named after a common theme in the included ships' names, e.g., Template:Sclass2-s, and some classes were implemented as an organizational tool, making traditional methods of naming inefficient. For instance, the Template:Sclass- is also known as the A class. Most destroyer classes were known by the initial letter used in naming the vessels, e.g., Template:Sclass2-s. Classification by letter also helped to conflate similar smaller classes of ships as in the case of the C-class destroyers of 1913 whose names spread across the alphabet. Since the end of the Second World War, Royal Navy ship classes have also been known by their type number (e.g. Type 42 destroyer.)

United States

In the United States Navy, unlike most other navies, the first ship in a class to be authorized by Congress is the designated class leader and gives the name to the class, regardless of the order in which the ships of that class are laid down, launched or commissioned. Due to numbering conventions the lead ship almost always has the lowest hull number of her class. (During World War II the award of construction contracts was not always congruent with completion, so many ships had higher hull numbers than later-class ships.)

This is a popular naming convention in both naval and non-naval circles alike and Star Trek uses the same convention. Before the 1920s naval vessels were classified according to shared characteristics, as evidenced by the Navy's own "Standard Nomemclature for Naval Vessels: General Order No. 541, 17 July 1920". Nonetheless, it has not prevented naval historians and scholars to retro-apply the current convention to historical naval vessels sharing similarities, those of the American Civil War for example, where the Union Navy in particular had built several vessels in series, which can be typified as "classes" as presently understood. Popular retconned examples included the Template:Sclass- monitor and the Template:Sclass-, among many others, for the Union side, whereas historians have coined vessels as being Columbia-class or Richmond-class, for those ironclads in service with the Confederate States Navy. Generally accepted by military historians and widely used in the more recent books, webpages and papers on the subject matter (most notably the releases of Osprey Publishing), these latter-day classifications are sometimes, but still unjustified, considered "semi-official". Contemporary records themselves however, show that the modern nomemclature was not in use at the time and never has been, certainly not in a formal sense as was unequivocally exemplified by the complete ships listing in "Official Records of the Union and Confederate Navies in the War of the Rebellion" (Series 2, Volume 1, Part 1), where vessels were classified according to the oldfashioned descriptive conventions.

The unofficial retro-applying of ship classes can in some cases lead to confusion with researches. For example, while American reference works consistently adhere to the City-class and Columbia-class monikers, works of British origins (again, those of Osprey in particular) refer to the same classes as Cairo-class and Tennesse-class respectively, in compliance with the modern Royal Navy naming conventions. Yet, by the time the United States entered World War II, the naming convention was firmly in place, implying the practice had been formalized some time after July 1920, though it remains unclear as to exactly how and when the practice originated.

Merchant vessel class

Merchant ships are almost always classed by a classification society. These vessels are said to be in class when their hull, structures, machinery, and equipment conform to International Maritime Organization and MARPOL standards. Vessels out of class may be uninsurable and/or not permitted to sail by other agencies.

A vessel's class may include endorsements for the type of cargo such as "oil carrier", "bulk carrier", "mixed carrier" etc. It may also include class notations denoting special abilities of the vessel. Examples of this include an ice class, fire fighting capability, oil recovery capability, automated machinery space capability, or other special ability.

External links

• Naval naming conventions