Skycraft Scout
Skycraft Scout | |
---|---|
File:BCec1.jpg | |
A Skycraft Scout taking off from the beach at Kurnell, New South Wales | |
Role | Single seat ultralight aircraft |
Manufacturer | Skycraft Pty Ltd |
Designer | Ron Wheeler |
First flight | 1972 |
Primary user | recreational flying |
Produced | 1976–1978 |
Number built | 200 approx |
Developed from | Tweetie hang glider |
The Skycraft Scout is an Australian designed and built single-seat, tail dragger, microlight airplane, used primarily for recreational aviation.
Design and development
In July 1972, a Sydney boat builder named Ron Wheeler made the first flight of a minimum aircraft which he'd designed and built himself, and which he put into series production soon thereafter. At the time Ron was building catamarans in Sydney's southern suburbs. Having already developed 'Tweetie', a successful hang glider, Wheeler simply modified the design of the glider to have the pilot seated instead of hanging below the wings, and of course to accommodate an engine.
Marketed as the Skycraft Scout, this was the world's first commercially produced ultra light – rigid wing rather than a Rogallo – and spawned a new Australian industry.
Ron had no experience in aircraft design and claims to have started the project on a whim in his spare time. Using sources referenced from the library at Sydney Technical College and Hurstville local Library he built up a working knowledge of aerodynamics.
The Scout was a factory-built minimum aircraft that utilised yacht fittings from his local marine shop. The early Scout was an extremely basic machine, which utilised Dacron sailcloth for the wing covering, lanyards and battens and an aluminium yacht mast as the wing spar. It was initially powered by a modified Victa lawnmower engine and, unlike a conventional aeroplane, had only rudder and elevator controls. Nevertheless, on a good day, it usually flew.
Significantly, the Scout was the first ultralight aircraft to be covered by airworthiness regulations in the world, in this case-Australia's Air Navigation Order(ANO)95.10 issued by the Department of Transport. In 1975 Ron Wheeler approached The Department of Transport to issue an Air Navigation Order regulation for ultralight and minimum aircraft. Subsequently, the Department issued ANO 95.10 for unlicensed pilots to fly aircraft weighing less than 180 kilograms under a number of restrictive conditions, including altitude restrictions, and not to fly over sealed roads. This allowed the ultralight aircraft industry to take-off, and Wheeler went into full-time production of the Scout as a leisure craft.
Gallery
-
This modified and derelict Scout (This is not a Scout, it's a Thruster) was spotted at Esk in Queensland in May 2008.
-
Scout displayed at the Australian Aviation Heritage Centre in Darwin.
-
Cec Anderson's prototype Mk1 Scout displayed at Australia's Museum of Flight, HMAS Albatross, in 2006.
-
Scout displayed at the Australian Aviation Museum, Bankstown.
-
Prototype Scout Mk 1 displayed at the Powerhouse Museum, Sydney.
-
Replacement Scout parts could be ordered direct from Sykcraft’s Carlton (N.S.W.) factory, one of the more expensive components being the moulded plastic seat which retailed then for $11.80.
-
Burrill Lakes on the NSW South Coast.
-
Cec Anderson again.
Specifications
General characteristics
- Crew: one pilot
Performance
See also
- Powerhouse Museum's Skycraft Scout
- Vintage Ultralight and Lightplane Association
- Wheeler Scout mk III in flight
Aircraft of comparable role, configuration, and era
- Flight Dynamics Flightsail VII Flex wing aircraft
Surviving examples
- Australian Aviation Heritage Centre, Darwin.
- Australian Aviation Museum, Bankstown, NSW.
- Powerhouse Museum, Sydney.
- Museum Victoria, Melbourne.
- Recreational Aviation Australia Museum, Narrommine, NSW.
Video links
Here is a video link that works Sept. 2014 https://www.youtube.com/watch?v=E7-23gtYOQQ ALSO https://www.youtube.com/watch?v=XwLt5f2wRe0