Spallation
This article needs additional citations for verification. (December 2015) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/16/Spallation.gif/220px-Spallation.gif)
Nuclear physics |
---|
![]() |
Spallation is a process in which fragments of material (spall) are ejected from a body due to impact or stress. In the context of impact mechanics it describes ejection of material from a target during impact by a projectile. In planetary physics, spallation describes meteoritic impacts on a planetary surface and the effects of a stellar wind on a planetary atmosphere. In the context of mining or geology, spallation can refer to pieces of rock breaking off a rock face due to the internal stresses in the rock; it commonly occurs on mine shaft walls. In the context of anthropology, spallation is a process used to make stone tools such as arrowheads by knapping. In nuclear physics, spallation is the process in which a heavy nucleus emits a large number of nucleons as a result of being hit by a high-energy particle, thus greatly reducing its atomic weight.
Spallation in solid mechanics
Spallation can occur when a tensile stress wave propagates through a material and can be observed in flat plate impact tests. It is caused by an internal cavitation due to stresses, which are generated by the interaction of stress waves, exceeding the local tensile strength of materials. A fragment or multiple fragments will be created on the free end of the plate. This fragment known as "spall" acts as a secondary projectile with velocities that can be as high as one third of the stress wave speed on the material. This type of failure is typically an effect of high explosive squash head (HESH) charges.
Laser spallation
Laser induced spallation is a recent experimental technique developed to understand the adhesion of thin films with substrates. A high energy pulsed laser (typically Nd:YAG) is used to create a compressive stress pulse in the substrate wherein it propagates and reflects as a tensile wave at the free boundary. This tensile pulse spalls/peels the thin film while propagating towards the substrate. Using theory of wave propagation in solids it is possible to extract the interface strength. The stress pulse created in this example is usually around 3-8 nanoseconds in duration while its magnitude varies as a function of laser fluence. Due to the non-contact application of load, this technique is very well suited to spall ultra-thin films (1 micrometre in thickness or less). It is also possible to mode convert a longitudinal stress wave into a shear stress using a pulse shaping prism and achieve shear spallation.
Nuclear spallation
- See also Cosmic ray spallation
Nuclear spallation occurs naturally in Earth's atmosphere owing to the impacts of cosmic rays, and also on the surfaces of bodies in space such as meteorites and the Moon. Evidence of cosmic ray spallation (also known as "spoliation") is seen on outer surfaces of bodies, and gives a means of measuring the length of time of exposure. The composition of the cosmic rays themselves also indicates that they have suffered spallation before reaching Earth, because the proportion of light elements such as Li, B, and Be in them exceeds average cosmic abundances; these elements in the cosmic rays were evidently formed from spallation of oxygen, nitrogen, carbon and perhaps silicon in the cosmic ray sources or during their lengthy travel here. Cosmogenic isotopes of aluminium, beryllium, chlorine, iodine and neon, formed by spallation of terrestrial elements under cosmic ray bombardment, have been detected on Earth.
Nuclear spallation is one of the processes by which a particle accelerator may be used to produce a beam of neutrons. A particle beam consisting of protons at around 1 GeV are shot into a target consisting of mercury, tantalum, lead[1] or another heavy metal. The target nucleii are excited and upon deexcitation, 20 to 30 neutrons are expelled per nucleus. Although this is a far more expensive way of producing neutron beams than by a chain reaction of nuclear fission in a nuclear reactor, it has the advantage that the beam can be pulsed with relative ease. Furthermore, the energetic cost of one spallation neutron is six times lower than that of a neutron gained via nuclear fission. In contrast to nuclear fission, the spallation neutrons cannot trigger further spallation or fission processes to produce further neutrons. Therefore, there is no chain-reaction, which makes the process non-critical. The concept of nuclear spallation was first coined by Nobelist Glenn T. Seaborg in his doctoral thesis on the inelastic scattering of neutrons in 1937.[2][better source needed]
Production of neutrons at a spallation neutron source
Science with neutrons |
---|
![]() |
Foundations |
Neutron scattering |
Other applications |
|
Infrastructure |
|
Neutron facilities |
Generally the production of neutrons at a spallation source begins with a high-powered proton accelerator. The accelerator may consist of a linac only (as in the European Spallation Source) or a combination of linac and synchrotron (e.g. ISIS neutron source) or a cyclotron (e.g. PSI) . As an example, the ISIS neutron source is based on some components of the former Nimrod synchrotron. Nimrod was uncompetitive for particle physics so it was replaced with a new synchrotron, initially using the original injectors, but which produces a highly intense pulsed beam of protons. Whereas Nimrod would produce around 2 µA at 7 GeV, ISIS produces 200 µA at 0.8 GeV. This is pulsed at the rate of 50 Hz, and this intense beam of protons is focused onto a target. Experiments have been done with depleted uranium targets but although these produce the most intense neutron beams, they also have the shortest lives. Generally, therefore, tantalum or tungsten targets have been used. Spallation processes in the target produce the neutrons, initially at very high energies—a good fraction of the proton energy. These neutrons are then slowed in moderators filled with liquid hydrogen or liquid methane to the energies that are needed for the scattering instruments. Whilst protons can be focused since they have charge, chargeless neutrons cannot be, so in this arrangement the instruments are arranged around the moderators.
Inertial confinement fusion has the potential to produce orders of magnitude more neutrons than spallation.[3] This could be useful for Neutron radiography which can be used to locate hydrogen atoms in structures, resolve atomic thermal motion and study collective excitations of photons more effectively than X-rays.
See also
- Spall, or spalling
- Cosmic ray spallation
- Energy amplifier
- Subcritical reactor (accelerator-driven system)
Spallation facilities
- European Spallation Source, under construction, Sweden
- ISIS neutron source, Harwell, UK
- J-PARC
- LANSCE Los Alamos
- PSI Spallation Neutron Source (SINQ), Switzerland
- Spallation Neutron Source Oak Ridge, USA
- China Spallation Neutron Source
References
- ^ "Spallation Target | Paul Scherrer Institut (PSI)". Psi.ch. Retrieved 2015-12-12.
- ^ "A Man Beyond Elements: Glenn T. Seaborg" Iqbal 2000
- ^ Taylor, Andrew; Dunne, M; Bennington, S; Ansell, S; Gardner, I; Norreys, P; Broome, T; Findlay, D; Nelmes, R (February 2007). "A Route to the Brightest Possible Neutron Source?". Science. 315 (5815): 1092–1095. Bibcode:2007Sci...315.1092T. doi:10.1126/science.1127185. PMID 17322053.
External links
- IAEA database of spallation neutron sources in the Accelerator Knowledge Portal
- Description of ISIS accelerator etc.
- Spallation Neutron Source technical background.
- How spallation works at the ISIS neutron and muon source