Talk:Brake-by-wire

Automobiles Mid‑importance

	Cars portal This article is within the scope of WikiProject Automobiles, a collaborative effort to improve the coverage of automobiles on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.AutomobilesWikipedia:WikiProject AutomobilesTemplate:WikiProject AutomobilesAutomobile articles
Mid	This article has been rated as Mid-importance on the project's importance scale.

Engineering Low‑importance

	Engineering portal This article is within the scope of WikiProject Engineering, a collaborative effort to improve the coverage of engineering on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.EngineeringWikipedia:WikiProject EngineeringTemplate:WikiProject EngineeringEngineering articles
Low	This article has been rated as Low-importance on the project's importance scale.

Clarification needed

A clamp force sensor is a relatively expensive component in an EMB caliper. The cost is derived from its high unit value from a supplier, as well as marked production expenses because of its inclusion.: That's like saying a monkey has a tail because its a tail bearing animal. Unfortunately I don't know why they're expensive, so can't help.

Tabby (talk) 10:59, 11 April 2011 (UTC)[reply]

hahahaha

External links modified

Hello fellow Wikipedians,

I have just modified 2 external links on Brake-by-wire. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 07:51, 7 November 2016 (UTC)[reply]

Previous "further reading" section

Hoseinnezhad, R., Bab-Hadiashar, A., Missing data compensation for safety-critical components in a drive-by wire system (2005), IEEE Transactions on Vehicular Technology, Volume 54, Issue 4, pp. 1304–1311.
Hoseinnezhad, R., Signal Processing Methods and Apparatus (Missing Data Handling by A Multi-Step Ahead Predictive Filter), International Patent number PCT/AU2005/000888.
Hoseinnezhad, R., Bab-Hadiashar, A., Fusion of redundant information in brake-by-wire systems, using a fuzzy Voter (2006), Journal of Advances in Information Fusion, Volume 1, Issue 1, pp. 35–45.
Hoseinnezhad, R., Position sensing in by-wire brake callipers using resolvers (2006), IEEE Transactions on Vehicular Technology, Volume 55, Issue 3, pp. 924–932.
Hoseinnezhad, R., Harding, P., Signal Processing and Position Determining Apparatus and Methods, International patent application number PCT/AU2006/000282.
Hoseinnezhad, R., Bab-Hadiashar, A., Automatic calibration of resolver sensors in electro-mechanical braking systems: A modified recursive weighted least squares approach (2007), IEEE Transactions on Industrial Electronics, Volume 54, Issue 2, pp. 1052–1060.
Anwar, S., Zheng, B., An antilock-braking algorithm for an eddy-current-based brake-by-wire system (2007) IEEE Transactions on Vehicular Technology, 56 (3), pp. 1100–1107.
Anwar, S., Anti-lock braking control of a hybrid brake-by-wire system (2006) Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220 (8), pp. 1101–1117.
Lee, Y., Lee, W.S., Hardware-in-the-loop simulation for electro-mechanical brake (2006) 2006 SICE-ICASE International Joint Conference, art. no. 4109220, pp. 1513–1516.
Canuto, F., Turco, P., Colombo, D., Control development process of the brake-by-wire system (2006) Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006, 2006,
Lang, H., Roberts, R., Jung, A., Fiedler, J., Mayer, A., The road to 12V brake-by-wire technology (2006) VDI Berichte, (1931), pp. 55–71.
Emereole, O.C., Good, M.C., Comparison of the braking performance of electromechanical and hydraulic abs systems (2005) American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC, 74 DSC (1 PART A), pp. 319–328.
Murphey, Y.L., Masrur, A., Chen, Z., Zhang, B., A fuzzy system for fault diagnostics in power electronics based brake-by-wire system (2005) Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS, 2005, art. no. 1548556, pp. 326–331.
Masrur, A., Zhang, B., Wu, H., Mi, C., Chen, Z., Murphey, Y.L., Fault diagnostics in power electronics based brake-by-wire system (2005) 2005 IEEE Vehicle Power and Propulsion Conference, VPPC, 2005, art. no. 1554615, pp. 560–566.
Anwar, S., A torque based sliding mode control of an eddy current braking system for automotive applications (2005) American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC, 74 DSC (1 PART A), pp. 297–302.
Anwar, S., Anti-lock braking control of an electromagnetic brake-by-wire system (2005) American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC, 74 DSC (1 PART A), pp. 303–311.

The "further reading" section was more than a decade old. I've replaced it with an up-to-date review of the topic:

Congcong Li (2023), "A Review of Electro-Mechanical Brake (EMB) System: Structure, Control and Application" (PDF), Sustainability, 15 (5), 4514, doi:10.3390/su15054514{{citation}}: CS1 maint: unflagged free DOI (link)

HueSurname (talk) 02:53, 1 June 2023 (UTC)[reply]

Turns out it's a predatory journal. I will be replacing the reference shortly... HueSurname (talk) 07:17, 8 July 2023 (UTC)[reply]